pinocollection 
Nowadays, there are so many products of thermostat hooked to heating element in roper dryer in the market and you are wondering to choose a best one. You have searched for thermostat hooked to heating element in roper dryer in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings thermostat hooked to heating element in roper dryer which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
279838 Dryer Heating Element For Whirlpool Kenmore SEARS, MAYTAG, AMANA, ADMIRAL, KITCHENAID, MAGIC CHEF, NORGE Replaces 3403585, 8565582, PS3343130, AP3094254
- Parts Number: 279838, Replaces 3403585, 8565582, PS3343130, AP3094254
- Highest quality nickle used in the wire
- Fits for brands: Whirlpool, Kenmore, Sears, Maytag, Aana, Admiral, Kitchaid, Magic Chef, Norge
- This element is rated at 5400 Watts 240 Volts and has 2- 5/16″ male terminals.
- GUARANTEE: Discount Parts Direct is a US based company, from molding, stamping to assembly, inspection of each process has strict quality requirements and hand check. We offer customer 100% Money Back Guarantee. We appreciate your business.
279838 Dryer Heating Element For Whirlpool/Kenmore
Replaces the following part numbers:
3403585, 8565582, PS3343130, AP3094254
Works for brands:
Whirlpool, Kenmore, Sears, Maytag, Aana, Admiral, Kitchaid, Magic Chef, Norge
Fixes problem with:
Dryer won’t produce heat
Dryer takes too long to dry
Dryer won’t start
Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.
Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.
EXP279838 Heating Element ( Replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313 PS334313 ) For Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley
Dryer heating element. If your dryer does not heat first check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases the heating element will have a break in the element if defective.
iPower GLDUCT4X8C 4 inch 8 feet Non-insulated Ducting Aluminum Foil Vent with 2 Clamps
iPower is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. We use the transformative power of light to make gardening more efficient and productive. In addition to HPS/MH and Ceramic MH technology, we offer digital ballasts, fluorescent, and LED lighting systems. From hobbyist to commercial applications, we offer a broad spectrum of gardening tools and equipment in hydroponics, irrigation, climate control, and structures to help your garden thrive.
iPower Ventilation Ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.
Benefits of iPower Ducting:
- This 4-inch ducting fits any standard 4-inch inline fan.
- 3-layer thickness: Aluminum Foil + PET + Aluminum Foil.
- Helically shaped and internally crimped galvanized steel strip.
- Interlocking steel strips to form an air tight and leak proof system.
- Each ducting unit includes a pair of metal clamps made from stainless steel.
- This air duct is easy to cut using a pair of metal snips or a standard wire cutter.
- This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc.
- This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces.
- Typical applications for ventilation ducting include: dryer room vents, A/C or Heater ducting, grow room ventilation and other indoor gardening applications.
- 12-month manufacturer warranty.
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
Camco 07023 Apcom Style Plumber’s Pack Water Heater Repair Kit
Product Description
Contains all the parts needed to repair or renew an electric water heater. Includes 2 each high watt density elements #0234,2 4500W 240V, 1 Apcom style lower thermostat with protector #07722, 1 Apcom style upper thermostat with protector #07862.
From the Manufacturer
The Camco HWD Plumber-Feet Pack Water Heater Repair Kit contains all parts needed to repair or renew an electric water heating system.
Dometic Parts 3850644422 Heating Element 325W 120Vac
Dometic designs and manufactures high-quality, innovative products for the RV, marine, hotel, automotive, agriculture, and trucking industries. Today the Dometic brand is associated with market leadership, comfort, and strength. People entrust their adventures to Dometic, the world leader in providing a comfortable mobile lifestyle.
3387747 Dryer Heating Element for Whirlpool, Kenmore & Maytag Dryer by PartsBroz – Replaces Part Numbers WP3387747, AP6008281, 3387747, 80003, PS11741416
- ✅ PART NUMBER 3387747: It’s a high-quality exact replacement for part numbers 3387747, 8527865, AP2947033, AP6008281, PS11741416, and PS344597.
- ✅ FOR WHIRLPOOL & KENMORE: The part works with several Whirlpool, Maytag, Kenmore, Kitchenaid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper brand electric clothes dryers.
- ✅ RESTORES HEAT TO DRYERS: Is your dryer on the fritz? Replacing a shorted out dryer heating element can fix dryers that don’t produce heat or produce very little heat.
- ✅ EASY TO INSTALL: The heater element arrives fully assembled to make installation easier. You’ll just need to open up your dryer to access and replace the broken element. Helpful tools include a putty knife, quarter-inch nut driver, and pair of needle nose pliers.
- ✅ HIGH-QUALITY PART: Made from premium materials, our 3387747 replacement part will last for years. It’s gone through thorough testing and meets all original manufacturer specifications. Specs: 5200 Watts, 240 Volts, 2-5/16” male terminals
A dryer heating element sits at the bottom of your dryer. It produces the heat that your dryer needs to operate properly. When a heating element shorts out, your dryer may stop working or take longer than normal to complete a cycle. Luckily, replacing a broken heating element only takes 30 to 60 minutes. The PartsBroz equivalent to part 3387747 offers affordability, durability, and compatibility with several Whirlpool manufactured dryers.
Installation Tips
Disconnect your dryer from its power source before beginning any repair. You’ll need a putty knife, quarter-inch nut driver, and pair of needle nose pliers to get the job done.
Restores Heat to Your Dryer
Replace the heating element will get your dryer up and running again. This repair fixes the following problems:
- Dryer won’t produce heat
- Dryer takes too long to dry
- Dryer won’t start
Compatible brands include: Whirlpool, Kenmore, Kitchenaid, Amana, Inglis, Crosley, and Maytag
Compatible model numbers include but are not limited to: GEW9200LW0, GEW9200LW1, GEW9250PW0, GEW9250PW1, GEW9200LL1, GEQ9800LW0, GEW9200LQ0, GEW9868KQ0, GEQ9800LW1, GEW9250PL0, GEQ9800PW1, GEW9868KQ1, 11082822101, 11082822102, and GEW9200LQ1.
Replaces several part numbers: 3387747, 8527865, AP2947033, AP6008281, PS11741416, and PS344597.
Have questions about compatibility? Reach out to us below in the customer question and answer section or on the PartsBroz storefront. We’re happy to help ensure you select the correct part for your dryer.
Honeywell RTH9585WF Wi-Fi Smart Color Thermostat, 7 Day Programmable, Touch Screen, Energy Star, Alexa Enabled
- PERSONALIZED THERMOSTAT – Personalize your comfort at home and program your thermostat to fit your lifestyle with the Honeywell Home Wi-Fi Smart Color Programmable Thermostat
- HELPS SAVE ON YOUR ENERGY BILL – Take the guesswork out of your monthly energy bill as this ENERGY STAR certified thermostat can adjust to your pre-programmed schedule or your energy company’s peak rate pricing. Program permanent, temporary, or vacation settings to help you save while you’re away as well. This Wifi thermostat may also qualify for utility rebates in your area
- SMART RESPONSE TECHNOLOGY – Learns your home’s heating and cooling cycles to deliver the right temperature when you want it
- COLOR TOUCHSCREEN DISPLAY – Change the color display of the large and easy-to-read to read touch screen to match the style of your home
- CUSTOMIZABLE PROGRAMMING – Personalize your thermostat to fit your unique lifestyle with easy in-app programming using the schedules of your home, family, or small business. Choose color schemes, heat and cool with HI/LO settings, language preferences (English, French, or Spanish), °C or °F temperature display, 12 or 24-hour clock, auto-fan circulation, and so much more using your iPhone, iPad, Android, or computer
- EASILY CONTROL ANYWHERE – Effortlessly adjust programs anywhere from your smart devices with the easy-to-use Honeywell app
- AI TECHNOLOGY – Voice control your Wifi-enabled Honeywell Home thermostat through Alexa or changes settings through Google Home
- CONVENIENT REMINDERS – Get notification reminders when your home loses internet connection or when your furnace or humidifier filters need changing
- EASY INSTALLATION – Setup for this thermostat is simple and easy. Verify compatibility with your home’s heating and cooling system, connect to Wifi, remove your existing thermostat, and install your Honeywell Home thermostat. 802.11b/g/n 2.4 GHz wireless router compatibility
- WARRANTY – 1-year limited warranty
This second generation Wi-Fi smart color thermostat is ideally suited for the connected home. Its packed with smart features, a customizable color touch screen and a simple, DIY set up. You can control the thermostat using the touch screen and change the background color to match your paint color or personal preference or use your tablet or computer. All you need is a Wi-Fi connection, or use the free app for smartphone/Tablet to mange the thermostat remotely. Intelligent alerts help to keep your equipment running at peak performance by sending you air filter and humidifier pad Change reminders, and also to notify you of extreme high or low indoor temperatures and humidity. 1) View local weather – daily forecast on screen and 5 – Day forecasts on app, 2) fully flexible progamming options, 3) Auto change from heat to cool – automatically determines if your home needs heating or cooling to provide maximum comfort, 4) reliable, secure network ensures app availability, 5) permanent/temporary/vacation hold – adjust temperature to suit your schedule. Does not work with heat pumps with electric baseboard heat (120-240 volts)
Wireless Temperature Controller,Electric Outlet Thermostat with Remote Control Built in Temp Sensor 3 Prong Plug Heating Cooling Mode (OPS100+OTS100)
- DIGITAL THERMOSTAT: Built-in temperature sensor, ambient temperature is detected automatically by remote controller, the thermostat socket stop to heat or cool after current temperature equal to target temperature.
- MULTIPLE SAFETY PROTECTION: 3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A. Supply high/low temperature warning in unattended operation.
- MULTI-CHANNEL: One remote can control multiple receiver switches. RF 433Mhz RF technology, free to choose between ℃/℉, display the current temperature and target temperature
- free to choose Auto Operation or Always ON/OFF function (Remote control).
- EASY TO SET AND INSTALL: No program need, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. LCD with backlight display reading accurately. Remote controller is convenient to hold in hand or stand on table or wall .
- APPLICATION: This wireless thermostat can help you control the room temperature accurately. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater,etc.
Inkbird Only Heating Thermostat 13.5A 1500W Digital C206T Temperature Controller Heater Time Cycle Setting Switch Timer Function ℉ ℃ Display NTC Sensor Seed Germination Reptile Brewing
Overview:
C206T is a heating output temperature controller (No Cooling Controller) specifically for breeding and planting. With its plug-n-play design, it can easily controls the temperature of your heat device, providing constant optimum temperature for the physiological needs of animals and plants. C206T can be widely used in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
C206T lets you to control your desired environment temperature. You can set the day and night temperature independently to connect your heat equipment, set the temperature that you want to maintain. With large output power 1500W(13.5A), it’s suitable for most applications.
Main features:
ONLY FOR HEATING, NO COOLING.
Plug and play design, easy to use
Support reading with C or F
Three display window, be able to display the current temperature and the setting temperature and the current time
Temperature calibration
Keep your desire temperature for your seed heat mat, aquarium heater, brewing heater ect.
It can be shut off to protect against overheating
The NTC stainless probe is waterproof, IP68 Grade
Maximum output load: 1500W(13.5A)
Programmable, 2 temperatures in 2 periods of time
Specification:
Temperature Control Range: -50~100°C / -58~212°F
Ambient Temperature: -30~75 °C (-22°F~167°F)
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C / ±1°F
Input: 100~265VAC 50/60HZ
Maximum Current: 13.5A
Maximum Power: 1500W (110V)
Dimension: 93(L)*63(W)*34(H) mm (3.66(L)*2.48(W)*1.34(H) in)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Warranty: 12 month
Package included:
1 x Temperature Controller C206T 13.5A
1 x NTC Sensor
1 x Manual
Conclusion
By our suggestions above, we hope that you can found thermostat hooked to heating element in roper dryer for you.Please don’t forget to share your experience by comment in this post. Thank you!
