pinocollection 
Nowadays, there are so many products of tap valve on a refrigerator in the market and you are wondering to choose a best one. You have searched for tap valve on a refrigerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings tap valve on a refrigerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank
- DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. . These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
With Kegco’s Standard Dual Keg Kegerator Conversion Kit, do-it-yourself beer lovers will have all of the tools they need to convert a refrigerator or freezer into a two product draft beer dispenser that has all of the exciting features that professionals love. Included in this kit are high quality and high performance parts like a commercial-grade dual gauge regulator that allows you to monitor both the CO2 pressure in your keg and the CO2 volume in your tank, and lever handle keg couplers that are more durable and long-lasting than wing handle couplers. Once the conversion process is complete, your new kegerator will be able to run 2 full-size kegs, 2 pony kegs, 2 five gallon kegs, or any combination you choose, depending on the capacity of the refrigerator or freezer that you have converted.
R134a Charging Hose to Refrigerator – with Gauge – R-134a can to R-12/R-22 Port, Include R12 to R134a Conversion Kit for A/C Pro Refrigerant & BPV31 Piercing Valve
- Package Includes: R134a Charging Hose – With Gauge X 1pcs, R12 to R134a Adapter (4 Pieces ) X 1 Set, BPV31 Piercing Valve X 1 Set
- R134a Charging Hose : 19″ long, Only used for Home Refrigerator adding refrigerant, Come with gauge for easily viewing during use, connect to the R-12/R-22 service port for easy conversion
- R12 to R134a Retrofit Kit : One low side port and one high side port, Completely used to replace R12 with R134a, made it easy to convert an R12 system over to R134a, Fits all vehicles 1976 – 1995, excluding some GM cars 91 and up
- BPV31 Piercing Valve ( Not OEM）for HVAC System, 3-In-1 Line Tap Piercing Valve for Bullet, Fits 3 sizes of tubing: 1/4″, 5/16″ and 3/8″, include: 1 valve ,1 Hex Key, 2 Adapters
- For more product details, please see the picture on the left side of the product text description. Please read the product details carefully before purchasing so that you can use it better
Guarantee
Super cost-effective package price, excellent appearance and performance. We believe that you will be satisfied. If not, MONEY BACK Within 30 days
Ice Maker And Humidifier Installation Kit by Choice Hose And Tubing | Poly Tubing, Includes Everything Necessary For Complete Installation
- EASILY CONNECT TO YOUR REFRIGERATOR OR FREEZER. Attach to your fridge / freezer and enjoy a cup of delicious, crisp water with crystal clear ice cubes in no time! Great for both on-the-door ice/water dispensers and in-freezer ice cube machines. Poly tubing is lead-free and completely safe for potable water, and will leave your water tasting as fresh and pure as before.
- SET UP YOUR HUMIDIFIER/EVAPORATIVE COOLER IN NO TIME! Quickly and easily attach to your boiler or furnace, then sit back and enjoy the results. Poly tubing is durable and reliable
- connect your humidifier now and enjoy it for years to come.
- POLY TUBING is durable, reliable, and will leave your water tasting as fresh and pure as before. Set includes ¼” X 25’ poly tubing- enough to comfortably accommodate any ice maker/ humidifier/ evaporative cooler installation.
- COMPLETE INSTALLATION KIT includes poly tubing, self-piercing saddle valve, and fittings This universal, all-inclusive kit is designed with metal fittings to ensure a solid and dependable connection. Included instructions make DIY installation a breeze!
- NO NEED TO TURN OFF WATER. Easily complete installation without the hassle of shutting off your water supply while you work. EASY DO-IT-YOURSELF INSTALLATION. Includes step-by-step instructions. Limited lifetime warranty. Manufacturer part number 509 5100R. Make it yours today!
Get your appliances set up quickly and easily with this ice maker/ humidifier/ evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation! Limited lifetime warranty. Make it yours today!
Frigidaire WF3CB Puresource Replacement Filter, 1-Pack
- n/a
- Imported
- The Frigidaire PureSource 3 water filter (WF3CB) produces cleaner, better tasting drinking and cooking water, including all dispensed drinking water, as well as the water used to produce ice
- Fits specific Frigidaire Side-by-Side models after 2009 that use a water filter located in the back, right top. Flow Rate: 0.5 gpm
- Minimum/maximum operating temperature : 33 F – 100 F (0.6 C -38 C). Change the water filter every six months to ensure the highest possible water quality. The water filter is located at the top right side of the fresh food compartment
- NOT to be confused with filter ULTRAWF, which is longer. WF3CB length is 9 inches. Rated Capacity: 200 gallons (757 L) with an indicator light
- The Frigidaire PureSource 3 water filter (WF3CB) produces cleaner, better tasting drinking and cooking water, including all dispensed drinking water, as well as the water used to produce ice
- Fits specific Frigidaire Side-by-Side models after 2009 that use a water filter located in the back, right top
- Change the water filter every six months to ensure the highest possible water quality. The water filter is located at the top right side of the fresh food compartment
- NOT to be confused with filter ULTRAWF, which is longer. WF3CB length is 9 inches
Product Description
The Frigidaire WF3CB pure source 3 replacement ice & water filter is used to replace water filters in Frigidaire side-by-side refrigerators manufactured after 2009. This replacement filter is tested and certified to nsf/ansi standard 42 and 53 for the reduction of at least 95% of contaminants and substances including chlorine, lead, mercury, and alachlor. It is located at the top right of the fresh food compartment and was designed as a “push/push” style filter, making it incredibly easy to replace.
From the Manufacturer
The Frigidaire PureSource 3TM ice and water filter system is tested and certified to NSF/ANSI Standards 42 and 53 for the reduction of claims.
2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge：
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
Raven Self Piercing 1/4" Compression Saddle Valve (2 Pack)
- ✅ CONTENTS: 2 Compression self tapping saddle valves
- ✅ COMPATIBILITY: Use this valve for ice maker or humidifier installation. Attaches to a 3/8” to 1 1/4” diameter copper pipe providing 1/4″ compression outlet that ensures a solid and dependable connection
- ✅ NO NEED TO TURN OFF WATER: Complete installation without the hassle of shutting off your water supply while you work. Easy DO-IT-YOURSELF installation
- ✅ 100% MONEYBACK GUARANTEE: We offer 90 days return and 365 days replace (at no charge) after the date of original purchase for risk-free purchase
INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your installation or fix your appliances quickly and easily, without the hassle of shutting off the water. This valve is designed to get the job done fast and lasting. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water flow to the ¼” compression outlet.
Enviro-Safe 3226 Can Tap with Gauge – R-134a can to R-12/R-22 port
This unique can tap has an R-134a screw on can connection and a R12/R22 service port connection. It was made for EnviroSafe cans which have an R-134a thread and allows you to install directly to R12 and R22 systems. Centrally installed is an easy to read pressure gauge. 20″ long hose 1/4″ end end fits R12, 22, 502 fittings Gauge has scale readings for R134, R12, & 22 Use for household with aerosol style cans. This gauge does not have a shut-off. The T-handle is a piercing device only.
LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing
Product description
Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.
From the Manufacturer
LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.
2 Pack BPV-31 Bullet Piercing Tap Valve Kits Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
- You will receive: 2 packs BPV-31 bullet piercing tap valve kits
- Each kit including 1 piercing valve, 1 hex key, 2 adapters
- Model No.: BPV-31 bullet piercing tap valve
- Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
- Sturdy material: made of corrosion-resistant metal that won’ t wear out or rust over time, a convenient replacement part for you to use
- Easy to install: you only need a hex key wrench (included) to install this part
- Its compact design only requires a 2 inch clearance area for installation and use
- Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
2 Pack BPV-31 bullet piercing tap valve kits replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
Model No.:
BPV-31 bullet piercing tap valve; Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Features:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the O-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Specification:
Material: metal
Quantity: 2 packs
Color: sliver
Easy to install:
Cleaning off the copper pipe with a wire brush or abrasive cloth.
Attach it to the smoothest part of the copper tube to ensure tight sealing.
Package includes:
2 x BPV-31 bullet piercing tap valve kits
Warm notice:
It is not suitable for refrigerant 410a.
Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked high density polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily without the hassle of shutting off the water. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water where you want it to go.
- LEAD FREE COPPER CONSTRUCTION allows you to safely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper saddle valve is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. For use with 3/8” to 3/4″ copper pipe. 1/4 inch outer diameter outlet saddle valve. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Limited lifetime warranty. Choice Hose and Tubing part number 509 5110K.
Get your appliances set up quickly and easily with this ice maker, humidifier, water filter and evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation. Limited lifetime warranty. Make it yours today!
Conclusion
By our suggestions above, we hope that you can found tap valve on a refrigerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
