Best Stampede 4X4 Motor Cooling Fan

Deal Score0
Deal Score0
  • Best Stampede 4X4 Motor Cooling Fan
  • Best Stampede 4X4 Motor Cooling Fan

Nowadays, there are so many products of stampede 4×4 motor cooling fan in the market and you are wondering to choose a best one. You have searched for stampede 4×4 motor cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings stampede 4×4 motor cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

Hot Racing ESC303T06 Velineon Vxl-S3 Esc Aluminum Heat Sink High Velocity Fan

$16.72$23.88$29.37
Last update was on: Sunday, December 29, 2019

This is the optional aluminum heat sink with cooling fan for the Traxxas Velineon vxl-3 electronic speed control from hot racing features: Screw secure clamp on aluminum heat sink. Added heat sink cooling area. Mount higher to allow better airflow high Velocity fan simple installation plug right in with the VXL-3s ESC. You will receive: one high Velocity fan one set of heat sink mount.

Integy RC Model Hop-ups T8074SILVER Motor Heatsink 540 Size w/Cooling Fan for Slash Stampede 2WD Rustler 2WD Bandit

$9.91$14.16$16.71
Last update was on: Sunday, December 29, 2019

OVERVIEW: Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle s motor, and features multiple cooling fins for added heat-dissipating surface area. We have different motor heatsink styles (top mount, side-mount, etc.) and single or dual cooling fan models available in multiple anodized colors. IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5. 0V and no more than 6. 0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6. 0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5. 0V and no higher than 6. 0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans. Item T8074BLUE Barcode: 91789006233

Apex RC Products 30x30x10mm Ball Bearing Motor/ESC Cooling Fan – 2 Pack #8030

$9.79$13.99$16.09
Last update was on: Sunday, December 29, 2019

Apex RC Products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value.

GoolRC 3650 3930KV 4P Sensorless Brushless Motor for 1/10 RC Racing Car Off-Road Truck

$14.69$20.99$28.76
Last update was on: Sunday, December 29, 2019

Features:
4 poles 12 slot Hi-torque motor design.
CNC machined 6061 T6 billet alumium heatsink can.
High purity copper windings maximizes efficiency.
High RPM ABEC5 oversized bearings.
Universal fit all 1/10 brushless cars-multi-mounting system for M3 screws.
Precision balanced rotor, smoothness for best reliability and maximum RPM.
Stator – Super Thin (0.35mm) laminations.
Removable/replaceable.
Precision engineered for maximum energy conversion.

Specification:
RPM: 3930KV
Max Current: 60A
Max Watts: 820W
Can Size: 3650
Sensored: No
Can Diameter: 36mm
Can Length: 50mm
Shaft Diameter: 3.175mm
Shaft Length: 15mm
Weight: 147.8g/5.2oz
Max voltage: 7.4V(2S)-11.1V(3S)
Package size: 10 * 8 * 6.3cm/ 3.9 * 3.1 * 2.5in
Package weight: 178g/6.3oz

Package list:
1 * 3650 3930KV 4P Brushless Motor

Hot Racing ESC303F01 Cooling Fan for The Castle Sidewinder and Axial AE2 ESC

$13.22$18.89$23.8
Last update was on: Sunday, December 29, 2019

Hot Racing cooling fan for the Castle Sidewinder SV3, SV2, and SCT; and Axial AE2 electronic speed controlsFEATURES: – Keeps your SV3, SV2, SCT or Axial AE-2 running cooler- Simple installationYOU WILL RECEIVE: – One (1) cooling fan- Mounting brackets- Mounting hardwareREQUIREMENTS: – Installation onto speed controller- Spare receiver port for power supply- Recommended to use a removable-type locking adhesive on screws threading into metalSPECIFICATIONS: – Size: 30x30x7.5mm- Mounting hole pattern: 24mm square- Input voltage: DC 7.2-8.4V MAXCOMMENTS: – Speed controller is not included and is shown for demonstration only- Fits the Castle Sidewinder SV3, SV2, and SCT ESCs- Fits the Axial AE2 ESCdescription revised by: SN May 27, 2015

Hot Racing MH550TE06 Blue Multi Mount Fan Heat Sink 36mm Motors, Blue

$9.51$13.58$19.83
Last update was on: Sunday, December 29, 2019

Blue Colored heat sink with Cooling Fan Can be adjusted to fit Traxxas Slash, Stampede, Rustler, Bandit, Etc. FEATURES: Aluminum heat sink and cooling fan helps motor to run cooler YOU WILL RECEIVE: One motor heat sink with cooling fan with red 2-pin wire connector REQUIREMENTS: Installation on motor SPECIFICATIONS: length: 1.7 (43mm) width: 1.4 (37mm) height: 1.6 (40mm).

Integy RC Model Hop-ups T8074RED Motor Heatsink 540 Size w/Cooling Fan for Slash Stampede 2WD Rustler 2WD Bandit

$6.99$9.99$12.69
Last update was on: Sunday, December 29, 2019

OVERVIEW: Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle s motor, and features multiple cooling fins for added heat-dissipating surface area. We have different motor heatsink styles (top mount, side-mount, etc.) and single or dual cooling fan models available in multiple anodized colors. IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5. 0V and no more than 6. 0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6. 0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5. 0V and no higher than 6. 0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans. Item T8074RED Barcode: 91789014829

Integy RC Model Hop-ups C28601ORANGE 36mm Motor Heatsink+40mm Fan 16k RPM for 1/10 Slash 4X4, Stampede 4X4, 4-Tec 2.0

$19.59$27.99$39.47
Last update was on: Sunday, December 29, 2019

OVERVIEW: Keep your Traxxas Slash 4×4, Stampede 4×4, or 4-Tec 2.0 motors running cool with our 40x40mm High Speed Cooling Fan and Heatsink Kit. The kit features a high-speed 16,000RPM cooling fan that is pre-wired for easy installation. The High Speed Cooling Fan w/Heatsink attaches to most 36mm diameter brushed or brushless motors, and is available in seven colors.Note: If you do not know how to assemble or install a product, please ask your local dealer for assistance. We do not guarantee product compatibility with other aftermarket branded products. Extra hardware and/or permanent modification may be required to install some products. Some products may eliminate certain OEM features. Some Integy-branded items may be only compatible with the vehicle’s OEM parts but not with another Integy-branded item due to design limitations. For multiple-fitment items, some parts may not be used based on application. Item# C28601ORANGEBarcode: 91789034593

Integy RC Model Hop-ups C28602GREEN 36mm Motor Heatsink+40mm Fan 17k RPM for 1/10 Slash 4X4, Stampede 4X4, 4-Tec 2.0

$20.99$29.99$43.19
Last update was on: Sunday, December 29, 2019

Item# C28602GREENBarcode: 91789034598

Conclusion

By our suggestions above, we hope that you can found stampede 4×4 motor cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!

10 Total Score
Excellent

Best stampede 4x4 motor cooling fan: Top-Rated Brands & What to Buy

User Rating: 4.63 (560 votes)