Top 10 Shallow Well Pump Home Hardware

The FN Series Provides strong performance with good pressure for wells to 25 ft. deep, •Quality Construction – Close-grained cast iron body and base, specially treated for corrosion resistance. Drain port provided for easy winterizing, •Precision Molded Diffuser – Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser., •Motor Windings – Superior insulation materials protect against excessive moisture and contaminants…assure prolonged motor life., •Heavy-duty Ball Bearings – Sealed, permanently lubricated bearings, extensively tested to ensure extended life and smooth quiet operation., Product Specifications: •Body Construction: Cast Iron, •Horsepower: 3/4 HP, •Maximum Capacity: 15 GPM, •Max Lift: 25 Feets, •Max Shut-off Pressure: 70 PSI, •Maximum Inlet Pressure: FND: 50 PSI, •Pressure Switch Settings: 30-50 PSI, •Suction Size: 1-1/4″ NPT, •Discharge Size: 1″ NPT, •AMP Draw (full load): 12.2 amps (model FND on 115v), •Voltage: 230v / 115v, •Maximum Liquid Temperature: 140°F (60°C)

Specification:

Interface size: 32mm outer diameter water pipe

Material: SU202 stainless steel

Pump body thickness: 1.3MM

Pump height: 25.5CM

Pump bottom diameter: 8.9CM

Outlet length: 5.7CM

Water depth: 10 meters of groundwater

Handle: all solid stainless steel

Weight: about 2KG

Specification:

Flow rate: 23 GPM

Dimensions: 9.1 x 17.8 x 9.1 inches
Weight: 39.6 pounds
Product warranty: 1-year warranty
Keep your rural home, farm, or cabin supplied with fresh water all year long for years to come with the help of this Red Lion RJS-75 3/4-HP Premium Shallow Well Jet Pump. This heavy-duty pump is designed with a 115/230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability.
It also features 50 PSI and a 16 GPM flow rate with automatic shut-off, voltage selector for simple connection to existing power sources, a factory pre-set 30/50 pressure switch, and a glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow. Ideal for shallow wells up to 25 feet in depth, the Red Lion RJS-75 3/4-HP Premium Shallow Well Jet Pump will get the job done.

3/4 hp plastic shallow well jet pump; thermoplastic or cast iron pump heads with a pressure gauge and switch included; 1-1/4 inch suction and 1 inch discharge. Pre-set, pre-wired pressure switch for automatic operation. Offers dual voltage in 115 or 230V and factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt.

1/2 H.P SHALLOW WELL JET PUMP – Rugged cast iron pump case. Priming screen. Reinforced thermoplastic impeller with stainless steel threaded insert. Field proven diffuser with stainless steel wear ring. Dual compartment double ball bearing motor with voltage selector switch. Squared D pressure switch.

NOTE: Pumps are manufacturer tested and may contain water inside from such testing

Myers HJ Series is one of the most popular pump series in the market today. The HJ Series is known for its superior performance and dependability in home, farm, business and industrial applications around the world.

Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25′ or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor – 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.

1/2 hp, shallow well jet pump, cast iron, dual voltage, includes s.W. Ejector, 20/40 square D pressure switch, copper windings & double ball bearings, 0′ at 40 psi = 678 gph, 5′ at 40 psi = 570 gph, 15′ at 40 psi = 468 gph, 25′ at 40 psi = 312 gph, 1 year warranty.

Product description

About the Flotec TC2504LF 1-1/2″ Foot Valve for Sprinkler and Jet/SubmersibleWell Pumps ndash; Lead Free The Flotec TC2504LF is the foot valve you need to place at your pumps wet well. Unlike other valves you may need, this foot valve was designed with a larger flow area than the actual pipe size on your pump to ensure there is less head loss. If you want your pump to perform at its best, then you need this Flotec foot valve. This foot valve is made of brass and will help keep a continuous presence of suction within your Flotec pump. The Flotec TC2504LF helps maintain hydraulic pressure to keep the water flow within your settings or configurations. This valve comes with a one year manufacturer warranty, as well.

From the Manufacturer

Foot valve protects pump from debris

Product Description

Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Shallow Well Pump Home Hardware, eg:

• What are Top 10 Shallow Well Pump Home Hardware for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Shallow Well Pump Home Hardware to buy?
• What are Top Rated Shallow Well Pump Home Hardware to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Shallow Well Pump Home Hardware?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Shallow Well Pump Home Hardware.
• Before deciding to buy any Shallow Well Pump Home Hardware, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Shallow Well Pump Home Hardware and What you should consider when buying the Shallow Well Pump Home Hardware and Where to Buy or Purchase the Shallow Well Pump Home Hardware. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Shallow Well Pump Home Hardware of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Shallow Well Pump Home Hardware.