Which Is The Best Raspberry Pi 3 Case With Cooling Fan
Nowadays, there are so many products of raspberry pi 3 case with cooling fan in the market and you are wondering to choose a best one. You have searched for raspberry pi 3 case with cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings raspberry pi 3 case with cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b
- 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 (Not include Pi Board)
- Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components
- Made of Acrylic, the pi case makes sure that won’t block Pi’s Wifi / Bluetooth signal
- Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, USB, SD, Power Supply etc ports
- Specially Come with mini fan and 3 pcs heatsinks for quick cooling CPU/ROM/RAM, also has a stable 2.5A power supply with a handy on/off switch on the 1.5m long cable
(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .
Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.
Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case
Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)
Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.
(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.
Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A
Similar items with 4 stars and above
iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 30mm Large Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 3 Model B+ / Pi 3B
iUniker Raspberry Pi Cluster Case, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Pi 3 B, Pi 2 B, Pi B+ (4 Layers-Brown)
- Complete Stackable Clear Acrylic Case Kit for Up To Four Layers
- Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+
- Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi
- With Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
Package Include: 1x 4-Layer Raspberry Pi Case 4x Cooling Fan 4x Raspberry Pi Heatsink Kit 4x Screw Set
Smraza Raspberry Pi 3 B+ Case with Cooling Fan, 2.5 A Power Supply and 16GB Micro SD Card (Need Download Noobs System)
- Raspberry pi 3 b+ case with fan, 3 pcs heatsinks, 16 GB SD card, 1m HDMI Cable, 1.5m USB Cable with 5V 2.5A Power Supply. SD card need to install Noobs System.
- Cooling Fans + Heatsinks – With DC 5V quiet fan + 3pcs Aluminum heatsinks to keep raspberry pi cool.
- Easy to access all GPIO ports – Acrylic Pi case(9 layers) with cutout to allow USB ports, Ribbon cable, Camera module and other gpio ports access.
- Convenient to turn on/off Pi 3b plus – 59 Inch Micro USB cable with on off switch, easy to operate.
- Smraza Pi 3 b+ Power Adapter – Output 5V DC 2.5A Regulated, input 100V to 240V AC.
Are you looking for the best starter kit for your Raspberry Pi? This is your first choice, and the kit is perfectly design for model 3B and model 2B,don’t hestitate to have it.
Note
1.The 9 layers case contains different components(with different colors), it need to follow the detailed guide. Before you install this case, we hope that you can read our case installation guide and refer it.
2.Then you need to peel paper off the plastic pieces before you assemble it.
Package Included:
1)9 Layers Case x1
2)USB Cable x1
3)Fan x1
4)16G SD Card x1
5)HDMI Cable x1
6)Card Reader x1
7)Aluminium Heat Sinks x3
8)Power Supply x1
About Smraza:
We are a leading manufacturer of electronic components for Arduino and Raspberry Pi. We have a professional engineering team dedicated to providing tutorials and support to help you get started.
If you have any technical questions, please feel free to contact our support staff via Amazon.
Argon One Raspberry Pi 3 B+ / B Case with Cooling Fan | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies, and Music
- SLEEK MULTIMEDIA CASE | This sleek aluminum case not only brings out stunning aesthetics, but it’s also highly functional by protecting the Raspberry Pi from harm and being usable for pastimes such as retro gaming, watching movies, or even playing music. This case supports Raspbian, LibreElec, Retropie, Recalbox, and OSMC.
- PASSIVE &
- ACTIVE COOLING | The Argon One itself acts as the Raspberry Pi’s heatsink for passive cooling. A proprietary software controls the fan inside the case for an active and improved temperature management.
- EASY ASSEMBLY &
- NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. Safe Shutdowns, Reboots, and Forced Shutdowns are built in features.
- MAGNETIC REMOVABLE TOP &
- ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects. A magnetic removable top makes the pins safe when they aren’t in use.
Similar items with 4 stars and above
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
- Installation instructions video: ★https://drive.google.com/file/d/1n6y5fzvX74SwWc_HFvO6YHhfe32-4vgi/view
- ★https://drive.google.com/open?id=1rx11diEefXeZ3Ig40MzuMXO3-9tdFoo3. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!
- Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!)
- Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging.
- With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don’t need to open the cover. This case is easy to install and has good ventilation.
- With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera(Rpi camera purchase link: https://www.amazon.com/dp/B06XYDCN5N).
Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, Enclosure Box with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
This protective case is designed specifically for the Raspberry Pi 2 Model B/B+ and Raspberry Pi 3 Model B and 3.5inch display;
It provides the best available protection/accessibility for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B and 3.5 inch display.
This case is easy to install and has good ventilation, it can install the cooling fan when you have not use the display.
There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don’t need to open the case.
It with a compact design, simple and elegant, transparent environmental protection material.
Package Including:
1 * Raspberry Pi Case
3 * Heat Sink
1 * Mini Cooling Fan with screws
Smraza Raspberry Pi 3 Case with Cooling Fan, 16GB Micro SD Card and Micro USB Cord with ON/Off Switch, Protective Case for Raspberry Pi 3b(Not Fit Pi 3b+)
- Easy assembly – Fits for Raspberry pi 3b 2b, case allow sd card, Breakout cable and other GPIO ports for pi access, package come with set-up instruction.
- 16GB Micro SD Card (At least $9.99 on amazon) for Raspberry pi – With high speed SDHC class 10 UHS-1 which adapts to NOOBS operating system.
- Double Cooling – For Raspberry pi 3 Case with Fan(spins quietly) + 3pcs Aluminum Heatsinks(with thermal adhesive)improve the pi ventilation.
- 39 inch HDMI Cable – Meets HDMI 1.4 specification, connects Raspberry Pi, Blu-ray players, computers and other HDMI-enabled devices to TVs and displays.
- Include 2.5A power supply + 59 inch Micro USB power cable with on/off switch – Convenient to control the charging of Pi 3 board with ON/OFF Switch.
We are a leading manufacturer of electronic components for Arduino and Raspberry Pi. We have a professional engineering team dedicated to providing tutorials and support to help you get started.
Any technical questions, please feel free to contact our support staff via Amazon communication tool.
Smraza case kit for Raspberry pi 3b 2b, it specially designed for Raspberry pi 3 model b and 2 model B.
Note:
1. The 9 layers case contains black and clear layers, before you assemble this case, we do hope you follow the instruction and remove the protective films of each layer .
2. Our Micro USB Cable is not support data transfer.
3. The Kit is not include the Raspberry Pi Board.
Package Included:
1)9 Layers Case x1
2)USB Cable x1
3)Fan x1
4)16GB Micro SD Card x1
5)HDMI Cable x1
6)Card Reader x1
7)Aluminium Heat Sinks x3
8)Power Supply x1
FQA & Support:
1) This 9 layers case is not compatible with the new version Raspberry pi 3 model B+, because the PoE pins and slight re-positioning of a chip so that it does not compatible with this case’s layers.
2) If there has any issue of your case kit(with broken pieces or miss any accessory), please contact us to get quick support via Amazon.
Related item:
T Type Breakout Board for Raspberry Pi : http://a.co/5sB9D8R
Smraza Raspberry Pi 3 B+ Case with Power Supply Adapter w/ON Off Switch+ Mini Fan + Alumninum Heatsinks, Works for Raspberry Pi 3b Plus 3 Model B+
- Updated case for raspberry pi 3b+ case – Clear Instruction included, easy assembly.
- 5V 2.5A Power Supply- Output 5V DC 2.5A Regulated, avoiding the pi reboot by insufficient power supply.
- 150 cm 5 Feet power cable with On/Off Switch – Inline Noise Filter, safe to use.
- Good heat ventilation – 1PC cooling fan + 3PCs Aluminium Heatsinks w/ thermal adhesive to keep pi cool.
- Accurate Design for raspberry pi ports – Pi 3 model B+ Case with special cutout for sd card, ribbon cable and other ports.
Aukru Raspberry Pi 3 b+ Case Raspberry Pi 3 b+ Fan Raspberry Pi 3 heatsink kit for Raspberry Pi 3 Model B Accessories Pi 2 Model B + Raspberry Pi 3 b+ Case, Cooling Fan, Heat Sink Raspberry Pi 3 b+
- Aukru RASPBERRY PI SET – Clear Case + Cooling Fan + Heatsink for Raspberry Pi 3 model b & Pi 2 model b +
- COOLING FAN INCLUDED! Mini 3x3cm DC 5v 0.2A fan give your Raspberry Pi CPU excellent cooling and ventilation with our easily attachable Pi Fan. This fan will replace the hot air in the case with fresh cool air keeping your temperatures lower. Fan is attached with four metal screws (supplied) to case
- THIS CASE USES STRENGTHENED PLASTIC – That Is 2 Piece Injection Moulded And Snaps Together Holding Your Raspberry 2 & 3 Firmly In Place With Four Metal Screws
- EASY ACCESS TO ALL PORTS – With Access To Raspberry Pi 3 & Pi2 Consumer Ports and Camera To Easily Connect Your Raspberry Pi Kit
- Notice: Raspberry Pi Board is Not Included
Aukru Raspberry Pi Clear Housing Transparent Cover Shell Cooling Fan Cooler Heatsink for Raspberry Pi 3 / 2 model b
Specification:
Housing Case:
Color: transparent
Contents: with screws, a screwdriver and four non-slip mats to fix the Raspberry Pi
Cooler Fan:
DC 5V 0.2A
3 x 3 cm balck with metal screws
Easy to install
Heatsink:
Adhesive paste down heatsink to cool the temperature
3pcs Heatsink Sets: 2x alminum heatsink; 1x copper heatsink
installation steps:
1, please put the pi module tilt,
2, when the hdmi port/micro usb port aligned with the corresponding hole,
3, put the module in the case.
Warning:
The raspberry pi 3 has exactly the same shape as a raspberry pi 2. The heatsinks are on top of the board, one on the CPU, one on the GPU, do not need to put heatsink on the component underneath The card, you may not be able to insert the card into its case
Package include:
1 x Aukru tansparent case
1 x Aukru cooling Fan
1 x 2 Aluminum Heatsink + 1 Copper Heat Sink
GeeekPi Acrylic Case for Raspberry Pi 4 Model B & Raspberry Pi 3 Model B+, Raspberry Pi Case with Cooling Fan and 7PCS Heatsinks for Raspberry Pi 3/2 Model B/B+ (Brown)
- 2 pieces of transparent acrylic box parts: easy to assemble and provides full access to your Raspberry Pi
- High Quality Acrylic case with fan secures your model Raspberry Pi 3B/3B+/Raspberry Pi 4B
- Fan Size:30x30x7mm
- More easily access to the board, power, RCA Video, Audio, USB, LAN (model B only), SD card and Light pipes
- Great heat dissipation performance.Comes with assembly screwdriver.
- Package Includes:1x Acrylic Case with Cooling Fan,1x Screwdriver,3 x Heatsinks for Raspberry Pi 3B+/3B/2B,4 x Heatsinks for Raspberry Pi 4B(Added on 2019.7.26)
- NOTE: Raspberry Pi main board is not included.
Conclusion
By our suggestions above, we hope that you can found raspberry pi 3 case with cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!