The 10 Best Raspberry 3 Cooling

Extreme Cooling Fan Kit For Raspberry Pi 3B+

Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.

Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes

Includes 15 pieces anodized black aluminum+ 5 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 , 3 B+ and 4 boards. These pure aluminum (15 pcs) and copper (5 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5 pcs aluminum heat sink 0.56 x 0.39 x 0.27 inch(14mm x 10mm x 7mm); 5 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)

Feature :
Compatible with Raspberry Pi models A, B, B+, 2, raspberry pi 3, raspberry pi 4 boards.
Significantly reduce the temperature of the CPU,ensure the Raspberry Pi remains cool while operating .
Almost without any noise.
These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC

Package included:
Mini fan X 2
Heatsinks X 6

Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.

Specifications:

– Fan Size: 30x30x7.5 mm (LxWxH)

– Wire Length: 2.6 inches (66mm)

– Connector: One-to-Two pin

– Color: Black

– Bearing Type: Hypro Bearing

– Operating Voltage: DC 3.3V – 5V

– Start up Voltage: DC 3V

– Current: 120 mA

– Speed: 5000RPM±15%

– Airflow: 1.79CFM

– Noise Level: 15.92dBA

– Life Time: 30,000 hours

Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.

(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .

Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.

Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case

Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)

Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.

(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.

Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A

Raspberry Pi 3 B+ Dual Fan with Heatsink

Features:
Aluminium Alloy Case,Ultra-thin design,Easy to install,Fast Heat dissipation;
Smooth and straight aluminum material;
Reinforced aluminum material, lightweight and durable, long-lasting stainless;
Big heat sink Design, it can keep your Pi keep cooling when you overclocking it. It can drop temp up to 30-37 ℃ / 80-98.6℉.

Specification:
Size: 8.5cm x 5.5cm x 2.2cm / 3.34inch x 2.16inch x 0.86inch
Compatible with: Raspberry Pi 3 Model B/B+, Pi 2 Model B/B+

Note:
There are 4pcs Thermal Tape in the packing. 2 big Thermal Tape are optional, when you use the case for Raspberry pi 3B+ and New version Raspberry Pi 3B, you just need one Thermal Tape; when you use the case for old version 3B, you need two Thermal Tapes.

Packing List:
1 x Aluminum alloy Case
1 x Screws pack
4 x Thermal Tape
1 x Screwdriver

Conclusion

By our suggestions above, we hope that you can found raspberry 3 cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!