pinocollection 
Nowadays, there are so many products of polyester water filter medium in the market and you are wondering to choose a best one. You have searched for polyester water filter medium in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings polyester water filter medium which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
23,858 Reviews Scanned
Rusco 1-1/2-140-F Polyester Screened Spin-Down Filter System
- The Rusco sediment filters use centrifugal separation technology to filter sediment from water.
- The Rusco filter system’s filter screen is cleanable and reusable.
- The Rusco filter system’s filter screen is cleanable and reusable.
- Rusco Sediment Filters have an open ball valve to easily flush sediment. When the Rusco filter is full of sediment, simply open the ball valve to flush the sediment.
Product Description
Rusco 1-1/2-140SS-F Spin-Down Filter System Replacement Parts:. Rusco 15SA Spigot Adapter Bushings are optional installation parts. Buy two adapters to convert the inlet and outlet Male Slip Fittings to Female Thread Fittings. Rusco 1.5C Spin-Down Replacement Filter Cover. Rusco 1.5B Replacement Filter Head. Rusco FS-1-1/2-140SS Stainless Steel Replacement Filter Screen. Rusco 1.5OR Replacement O-Ring Kit. Rusco SS1.5 Sun Shield is an optional accessory to block sunlight from coming through the clear cover. Rusco .5FV Replacement Manual Flush Valve. The Rusco AFV Automatic Flush Valve is an optional accessory for automating the flushing of the Rusco filter system. The Rusco Sediment Filter is designed to remove virtually all types of sediment, including shale, shell, debris, pipe scale, and sand/grit (course, fine, and very fine). The amount of sediment removed by the Rusco filter screen will depend on the micron rating of the filter screen. Smaller micron rated filter screens will remove smaller particles of sediment from your water. By removing larger sediment particles from your water, you are preserving the life of appliances and filter cartridges that may be installed after the Rusco sediment filter system. Screen Mesh Size: 140. Micron Rating: 104. Contaminant Reduction: Shale, shell, debris, pipe scale, and sand/grit (course, fine, and very fine). Inlet/Outlet Pipe Size dimension: 1.5″. Maximum Pressure: 150 PSI at 73 degrees F. (23C). Maximum Temperature: 100 deg F. at 40 PSI. Minimum Flow Rate For Spin-Down Action: 10 GPM. Service Flow Rate: 25 GPM. Maximum Flow Rate: 50 GPM. Length: 15-3/8″. Width: 5-1/4″. Body Material: PVC. Cover Material: High Impact Polymer Resin. Screen Material: Stainless Steel.
From the Manufacturer
Rusco 1-1/2-140SS-F Spin-Down Filter System Replacement Parts:. Rusco 15SA Spigot Adapter Bushings are optional installation parts. Buy two adapters to convert the inlet and outlet Male Slip Fittings to Female Thread Fittings. Rusco 1.5C Spin-Down Replacement Filter Cover. Rusco 1.5B Replacement Filter Head. Rusco FS-1-1/2-140SS Stainless Steel Replacement Filter Screen. Rusco 1.5OR Replacement O-Ring Kit. Rusco SS1.5 Sun Shield is an optional accessory to block sunlight from coming through the clear cover. Rusco .5FV Replacement Manual Flush Valve. The Rusco AFV Automatic Flush Valve is an optional accessory for automating the flushing of the Rusco filter system. The Rusco Sediment Filter is designed to remove virtually all types of sediment, including shale, shell, debris, pipe scale, and sand/grit (course, fine, and very fine). The amount of sediment removed by the Rusco filter screen will depend on the micron rating of the filter screen. Smaller micron rated filter screens will remove smaller particles of sediment from your water. By removing larger sediment particles from your water, you are preserving the life of appliances and filter cartridges that may be installed after the Rusco sediment filter system. Screen Mesh Size: 140. Micron Rating: 104. Contaminant Reduction: Shale, shell, debris, pipe scale, and sand/grit (course, fine, and very fine). Inlet/Outlet Pipe Size dimension: 1.5″. Maximum Pressure: 150 PSI at 73 degrees F. (23C). Maximum Temperature: 100 deg F. at 40 PSI. Minimum Flow Rate For Spin-Down Action: 10 GPM. Service Flow Rate: 25 GPM. Maximum Flow Rate: 50 GPM. Length: 15-3/8″. Width: 5-1/4″. Body Material: PVC. Cover Material: High Impact Polymer Resin. Screen Material: Stainless Steel.
Hydronix SPC-45-2050 Polyester Pleated Filter 4.5" OD X 20" Length, 50 Micron
Built to fit into select Liquatec, Pentek and Watts filter housings, the SPC-45-2050 Hydronix pleated sediment water filter helps ensure larger particles of dirt, sand and silt are significantly reduced from your water. Just as ideal for commercial and industrial applications as it is for residential. Constructed from the highest quality, durable polyester, this filter is reusable and washable, increasing its lifespan and providing you with more great tasting, clean water for even less per gallon! Order the SPC-45-2050 Hydronix pleated sediment water filter today.
Similar items with 4 stars and above
Pentek NCP-BB Carbon-Impregnated Polyester Filter Cartridge, 9-3/4" x 4-1/2", 10 Micron
- Reduces sediment and chlorine taste and odor in residential and municipal drinking water
- Nominal filtration rating of 10 microns
- Carbon-impregnated polyester media pleated around a polypropylene core for strength and resistance to bacteria
- Initial pressure drop of 2 psi at a flow rate of 8 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek NCP-BB carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 500 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a recommended flow rate of 8 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 8 gpm | 2 psi |
| Chlorine reduction capacity | 500 gallons at 2 gpm |
| Operating temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 4-1/2 inches (248 x 114 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek R30-20BB Pleated Polyester Filter Cartridge, 20" x 4-1/2", 30 Microns
- Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
- Nominal filtration rating of 30 microns
- Non-woven polyester media pleated around a polypropylene core for strength
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek R30-20BB pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 30 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek NCP-20BB Pleated Carbon-Impregnated Polyester Filter Cartridge, 20" x 4-1/2", 10 Microns
- Reduces sediment and chlorine taste and odor in residential and municipal drinking water
- Nominal filtration rating of 10 microns
- Carbon-impregnated polyester media pleated around a polypropylene core for strength and resistance to bacteria
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek NCP-20 pleated carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 1,000 gallons at a flow rate of 4 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 1 pound per square inch (psi) at a recommended flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 10 gpm | 1 psi |
| Chlorine reduction capacity | 1,000 gallons at 4 gpm |
| Temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 20 x 2-1/2 inches (508 x 114 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek ECP1-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 1 Micron
Pentek NCP-20 Pleated Carbon-Impregnated Polyester Filter Cartridge, 20" x 2-1/2", 10 Microns
- Reduces sediment and chlorine taste and odor in residential and municipal drinking water
- Nominal filtration rating of 10 microns
- Carbon-impregnated polyester media pleated around a polypropylene core for strength and resistance to bacteria
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek NCP-20 pleated carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 450 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a recommended flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 5 gpm | 2 psi |
| Chlorine reduction capacity | 450 gallons at 2 gpm |
| Temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 20 x 2-1/2 inches (508 x 64 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
(Package Of 6) Pentek R30-BB Pleated Polyester Water Filters (9-3/4" x 4-1/2")
Washable and reusable, the R30-BB (6-Pack) Pentek whole house water filter replacement cartridge is an economical way to ensure the water in your home or business remains virtually free of sediment. A genuine OE part, designed by Pentek to be resistant to both bacteria and chemicals, while capturing the maximum amount of dirt. Order the replacement R30-BB Pentek whole house water filter cartridge you need today!
Rusco 1-1/2-250-F Polyester Screened Spin-Down Filter System
- The Rusco sediment filters use centrifugal separation technology to filter sediment from water.
- The Rusco clear cover is made of high impact polymer resin for maximum strength and durability. The top of the Rusco system is made of PVC.
- The Rusco clear cover is made of high impact polymer resin for maximum strength and durability. The top of the Rusco system is made of PVC.
- The Rusco filtration system has a polyester screen filter.
Product Description
The Rusco filter system’s filter screen is cleanable and reusable. The Rusco systems have a clear cover that can easily be removed for cleaning. No tools are required to remove the cover. Sediment is visible through the clear cover indicating when the filter needs to be flushed. Rusco Sediment Filters have an open ball valve to easily flush sediment. When the Rusco filter is full of sediment, simply open the ball valve to flush the sediment. Rusco water filtration systems are made from molded non-corrosive materials. If you have a standard Rusco Spin-Down model that is 1-1/2″ or 2″, you can covert it to a Rusco Sediment Trapper model by replacing the filter screen element with a sediment trapper filter.
From the Manufacturer
The Rusco filter system’s filter screen is cleanable and reusable. The Rusco systems have a clear cover that can easily be removed for cleaning. No tools are required to remove the cover. Sediment is visible through the clear cover indicating when the filter needs to be flushed. Rusco Sediment Filters have an open ball valve to easily flush sediment. When the Rusco filter is full of sediment, simply open the ball valve to flush the sediment. Rusco water filtration systems are made from molded non-corrosive materials. If you have a standard Rusco Spin-Down model that is 1-1/2″ or 2″, you can covert it to a Rusco Sediment Trapper model by replacing the filter screen element with a sediment trapper filter.
Tier1 Replacement for Pentek & American Plumber CP5-BBS-D, CP5-BB, W5CPHD, 5 Micron 10 x 4.5 Pleated Polyester Sediment Water Filter 4 Pack
- QUICK & EASY INSTALLATION: Fits most housings that accept standard 10-inch x 4.5-inch water filter cartridges
- 3 MONTH FILTER LIFE: By replacing your water filter every 3 months, depending on your water quality, you keep your water tasting great.
- HIGH QUALITY FILTRATION: This filter reduces dirt, sediment, sand, silt, rust and corrosion, and other particles.
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is universal to many 5 Micron 10 x 4.5 pleated polyester sediment water filters
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
Conclusion
By our suggestions above, we hope that you can found polyester water filter medium for you.Please don’t forget to share your experience by comment in this post. Thank you!
