pinocollection 
Nowadays, there are so many products of pentek s1 water filter in the market and you are wondering to choose a best one. You have searched for pentek s1 water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek s1 water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
34,108 Reviews Scanned
Pentek S1 20 Micron Standard 10 x 2.5 Inch Pleated Sediment Water Filter 12 Pack
Pentek S1 Whole House Filter, Replacement Cartridge
Pentek S1-BB Pleated Filter (9-3/4" x 4-1/2"), 20 Micron
- Replacement filter cartridge for sediment reduction in general filtration applications
- Nominal filtration rating of 20 microns
- Resin-impregnated cellulose filter media pleated around a polypropylene core and sealed in plastisol to form a unified end cap for strength
- Initial pressure drop of 1.2 psi at 10 gpm
- Temperature rating of 40 to 145 degrees F (4.4 to 62.8 degrees C)
This Pentek S1-BB pleated cellulose filter cartridge reduces dirt and sediments in general residential and commercial water filtration applications. It has a nominal filtration rating of 20 microns. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core and sealed in plastisol to form a unified end cap for strength. It has an initial pressure drop of 1.2 pounds per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This pleated cellulose filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 20 microns |
| Initial pressure drop at 10 gpm | 1.2 psi |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Dimensions* | 9-3/4 x 4-1/2 inches/248 x 114mm (H x W) |
| Surface area | 2,070 square inches (1.34 square meters) |
| Recommended flow rate | 20 gpm |
*H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek S1-20BB Pleated Cellulose Filter Cartridge, 20" x 4-1/2", 20 Micron
- Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
- Nominal filtration rating of 20 microns
- Cellulose media pleated around a polypropylene core for strength
- Initial pressure drop of less than 1.2 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C)
This Pentek S1-20BB pleated cellulose filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 20 microns at an efficiency of 85%. The filter is made of cellulose media pleated around a polypropylene core for strength. It has an initial pressure drop of 1.2 pounds per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This pleated filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 20 microns |
| Initial pressure drop at 10 gpm | 1.2 psi |
| Recommended flow rate | 35 gpm |
| Operating temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Tier1 Replacement for Pentek S1 20 Micron 10 x 2.5 Pleated Cellulose Water Filter
- QUICK & EASY INSTALLATION: Fits most housings that accept standard 10-inch x 2.5-inch water filter cartridges
- 4 MONTH FILTER LIFE: By replacing your water filter every 4 months, depending on your water quality, you keep your water tasting great.
- HIGH QUALITY FILTRATION: This filter reduces dirt, sediment, sand, silt, rust and corrosion, and other particles. Note: Not Recommended for Well Water Systems.
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is universal to many 10 x 2.5 sediment water filters
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
Pentek S1 Sediment Filter (2-Pack)
Pentek S1 Sediment Filter (2-Pack). 9-3/4″ x 2-5/8″, 20 Micron Pleated Cellulose Water Filter. The Culligan / Pentek Compatible S1 Sediment Filter will fit in the following Reverse Osmosis Systems: PuROLine 5000 Reverse Osmosis,HF-150, HF-160, HF-360, HF-365, RO-2127. Ametek, USFilter, and Plymouth Products models #10 Blue, #10 Clear, Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10″ x 2.5″ filters. The Culligan / Pentek Compatible S1 Sediment Filter can also be a replacement for the following Filters: Culligan S1a = USFilter/Ametek/Kleen-Plus S1, Omni RS1, American Plumber W20CLa, Ace Hardware 49641, MasterPlumber TrueValue 614-800, Flotec RS2, GE FXWPC, Pentek S1, USFilter S1.
Pentek S1-20 Pleated Cellulose Filter Cartridge, 20" x 2-5/8", 20 Micron
(Package Of 2) Pentek S1-BB Sediment Water Filters (9.75" x 4.5")
Pentek S1-BB Water Filter Replacement Information: The Pentek S1-BB water filter is easy to install in big blue whole house systems or commercial water filtration systems. The Pentek S1-BB filter cartridge should be replaced approximately every 4 months or 16,000 gallons of water. The filter change interval also depends on your water supply and water usage. Pentek S1-BB Water Filter Equivalent Brands: The following Culligan water filter model holds the Pentek S1-BB sediment water filter cartridge: HD-950. The following Ametek, USFilter, and Plymouth Products model holds this sediment water filter cartridge: #10 Big Blue. The Pentek S1BB Sediment Water Filter Cartridge also fits Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne Water Pik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10" x 4.5" filters. . .Pentek S1-BB Pleated Water Filter Cartridge Specs: Dimensions:9.75" x 4.5" (248 mm x 114 mm) Micron Rating (Nominal):20 Micron Temperature Rating: 40?F to 145?F (4.4?C to 62.8?C) Initial ∆P (psi) @ Flow Rate (gpm): 1.2 psi @ 10 gpm (0.08 bar @ 38 L/min) Surface Area: 2070 sq. in. (1.34 sq. m.) Recommended Flow Rate: 20 gpm (76 Lpm) Pentek S1-BB Sediment Filter Materials of Construction: Filter Media:Resin-Impregnated Cellulose End Caps:Vinyl Plastisol Core:Polypropylene (Package Of 2)
Pentek Pentair 155405-43 S1-BB Pleated Cellulose Sediment Water Filter Cartridge 20 Micron 9-3/4"x4-1/2", Pack of 8
- City Water Only Contaminant Reduction Sediment (Sand, Dirt, Silt, Rust, And Scale Particles) Dimensions: 20″ L X 4-1/2″ D Rating: 20 Micron Flow Rate: 1.2 Psi At 10 Gpm
- City Water Only Contaminant Reduction
- Sediment (Sand, Dirt, Silt, Rust, And Scale Particles)
- Dimensions: 20″ L X 4-1/2″ D Rating: 20 Micron Flow Rate: 1.2 Psi At 10 Gpm
Pentek 155305-43 Specifications Filter Media: Pleated cellulose Application: City water only Contaminant Reduction: Sediment (sand, dirt, silt, rust, and scale particles) Dimensions: 20″ L x 4-1/2″ D Rating: 20 micron Flow Rate: 1.2 psi at 10 gpm Temperature Rating: 40°F to 145°F Part Number: 155305-43 / 15530543 S1 Series Cartridges Overview High flow filtration (very little pressure drop) Pleated design maximizes dirt-holding capacity Designed for general water filtration purposes Recommended for chlorinated water supplies Compatible Part or Model Numbers American Plumber W20CLHD20, 155305-51 Ametek S1-20BB Bruner S1-20BB Culligan S1-20BB Flowmatic FMBB-10-5 Keystone GC20-20 Kleen Plus S1-20BB Plymouth Products S1-20BB USFilter / US Filter S1-20BB Waterite Excelpure PL20B20
Conclusion
By our suggestions above, we hope that you can found pentek s1 water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
