Which Is The Best Pc Water Cooling Temp Sensor

Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Comes with cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, or t-piece integrated into the loop. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen temperature sensor plug G1/4 – chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards

This temperature sensor is equipped with a G1/4″ inner- and a G1/4″ outer thread and can therefore be integrated easily even directly on a waterblock or radiator. The sensor is equipped with a 60cm long cable and has a two-pin plug for connection.

Model: 53067

The new temperature sensor from Phobya with g1/4″ inner thread and G1/4″ outer thread respectively. With its compact design this sensor can be integrated into the cooling loop at virtually any suitable thread. Its timeless design makes it blend right into the system, especially as it’s low height of only 11,6mm (without threads) allows it to fit below almost any connector. The sensor cable is equipped with a standard 2-Pin plug. High-Flow, no narrowing of the cooling channel inside of the sensor! Also see example of installation. This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.

Model: 71227

With a bright OLED display, slick black finish and a light weight of 53 grams, the Bitspower Touchaqua Digit thermal sensor is the accessory of choice to monitor your water cooling loop temperature. Powered via SATA power adapter, the compact thermal sensor is fitted with G1/4″ thread to fit within the most common loops.

Model: BPTA-DTMC

Includes LCD display and temperature sensor wire

Model: 5060175589910

The sensor can be connected to the XSPC V2 LCD temperature sensors with 2pin connection on the back.

Model: 5060175584175

Inline filter with replaceable stainless steel mesh. Supplied with replacement mesh filter and two replacement o-rings.

Model: 5060596650343

Specifications:
Monitoring Range: -50 ~110 degrees
Voltage: 5V – 24V
Interface: Big 4P
Screw Thread: G1/4
Upper Panel Size: Approx. 4 * 8cm
Flat Plate Size: 4 cm * 8 cm
Applicable Pipe: 9mm Outer Diameter
Thermometer Panel Size: Approx. 47.8 * 28.2mm
Package Size: Approx. 12 * 9 * 3cm
Weight: 98g
 
Package List:
1 * Water Flow Meter
1 * Thermometer
2 * Connectors
2 * Clamps
 
Note:
●Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
●Product’s size made for manual measurement,  1-2CM error belongs to the normal range.

EK-PLUG G1/4 Acetal – Black (10 pack) is a simple pack of ten black acetal G1/4″ plugs with o-rings. The plugs can be easily tightened with a one Euro coin or a similar sized coin. The set of plugs is useful to cap your liquid cooling hardware which you are storing for a longer period of time. The simple acetal plug will prevent dust setting into your liquid cooling gear and since its an airtight plug, it will also prevent oxidation.

This set can also be utilized to convert EK-RES X3 Series reservoirs (also X4), EK-D5 Series pump combo units and EK-DDC Series pump combo units to be compatible with EK Fluid Gaming aluminum parts, by swapping out the brass nickel plated plugs.

Made from black CNC machined acetal. Sealed with quality o-rings.

Technical data:

– Threading: G 1/4″
– Thread length: 4mm
– Diameter: 17mm
– Height: 2.7mm

Model: 3830046995735

Specification:
Temperature sealing lock sealing plug
Dental regulations: G1 / 4” (common international regulatory teeth)
Body size: 64*92*26mm
Function description:
1. Comes with 2 set sensors:one set built-in sensor in the thermometer body, the temperature can act as the room temperature.Another set is waterproof sensor with G1/4’’ thread, install it into the reservoir to monitor the temperature of the liquid water cooling system.
2. Date / Time: Calendar and 12/24 hours conversion.
3. Temperature: *C/*Fconversion, ±1*C degree error range.
4. Support alarm clock function
5. The backlight color : thermometer support two color lighting switch, switch button in the back panel of the thermometer.
Operating Guide:
TIME Button: switching show TIME/date, hold for 2 seconds to reset the time.
ALM Button: for alarm clock, hold for 2 seconds to set the alarm clock time. The alarm time is 60 seconds.
UP Button: for plus time when setting the time clock OR turn on/ turn off alarm clock when setting alarm.
DOWN / *C/*F Button: for mins time when setting the time clock OR *C/*F switch.

Conclusion

By our suggestions above, we hope that you can found pc water cooling temp sensor for you.Please don’t forget to share your experience by comment in this post. Thank you!