Which Is The Best Pc Water Cooling Quick Release Connector

Alphacool HF quick release connector with bulkhead G1 / 4 IG – Chrome Alphacool’s new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a “click” mechanism but are bolted with a nut. The couplings can be no longer accidentally unlocked. The couplings do not affect the flow rate of your loop. When unlocking both sides of the coupling sealed completely. They have a ¼” internal thread on both sides so your choice of fitting can be used. Technical specifications: Dimensions (L x D): 63.9 x 26,1mm Material: brass chrome Thread: 2x 1/4 ” Diameter bulkhead thread: 16mm Schott Thread Length: 15mm Scope of supply: 1x Alphacool HF quick release connector with bulkhead G1 / 4 IG – Chrome

Alphacool’s new quick couplers with the name “Eiszapfen” are the next block in the “Eis” series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 “thread on both sides with which they are compatible with all standard connections. By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together. Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 64,6 x 23,9mm Material: Brass Colour: Chrome Thread: 2x 1/4” internal thread Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread – Chrome

Alphacool’s new quick connectors, called the “Eiszapfen” (icicle), are the newest addition to the “Eis” series. High quality and impressive features take every water cooling system a step forward in quality and practicality! A quick-release connector can be used anywhere where expandability, flexibility, or cleanliness play a big role. The compact connectors have a 3/8“ thread on both sides. In order to make these connectors compatible with all current components, a 1/4” thread reducer is also included. The connectors can be separated by pulling down the outer rings. Both sides immediately shut completely, so that no water can leak out. The special N.D.S.L. technology (no drip, no splash, no leak) ensures no water drips, splashes or leaks out while opening the connectors. When the pieces are reconnected, both sides audibly click together and are locked tightly with a double o-ring, which is simply pressed together when reconnecting. This also prevents any deterioration of the o-ring. The mechanism was also designed for longevity, to ensure a secure connections even after several years. Many quick connectors tend to compromise the flow rate. But Alphacool has found a way to solve this problem. These quick connectors can still sustain a high flow rate! Alphacool’s quick connectors are available in two models. In deep black and completely chromatized versions, they fit seamlessly into any system. Technical Specifications: Dimensions (L x D): 88.5 x 28mm Material: brass Colour: deep black Thread: 2x 3/8” IG Scope of Delivery: 1x Alphacool Eiszapfen HF quick release connector kit G3/8 inner thread with reducing nipple G1/4 and bulkhead – deep black Notice: The quick connectors should not be used dry for prolonged periods, as this will put stress on the o-rings and leak tightness can no longer be guaranteed.

Alphacool HF quick release connector with bulkhead G1 / 4 IG – Chrome Alphacool’s new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a “click” mechanism but are bolted with a nut. The couplings can be no longer accidentally unlocked. The couplings do not affect the flow rate of your loop. When unlocking both sides of the coupling sealed completely. They have a ¼” internal thread on both sides so your choice of fitting can be used. Technical specifications: Dimensions (L x D): 60.3 x 26,1mm Material: brass black Thread: 2x 1/4 ” Scope of supply: 1x Alphacool HF quick release connector kit G1/4 inner thread – Deep Black

A simple yet elegant computer chassis, the In Win 303 C is crafted from 1.2mm SECC Steel and tempered glass. The distinctively clean front panel is complimented with a bright LED design to balance the overall appearance. The 303C fully supports the motherboards with front USB 3.1 Gen 2 Type-C solution, allowing users to experience the highest data transferring speed and dual side slot also increase convenience. The logo is highlighted as well as the lucent strip in Win RGB LED I/O front panel, These provides users with incredible visual experience. In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303C since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel with just a press of a button. Overall, the 303C can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. Finally, the 303C is constructed with 1.2mm SECC< supports="" 2.5"="" and="" 3.5"="" drive="" bays,="" and="" has="" a="" separate="" psu="" chamber="" located="" above="" everything.="">

Alphacool’s new quick connectors, called the “Eiszapfen” (icicle), are the newest addition to the “Eis” series. High quality and impressive features take every water cooling system a step forward in quality and practicality! A quick-release connector can be used anywhere where expandability, flexibility, or cleanliness play a big role. The compact connectors have a 1/4” thread on both sides, making them compatible with all standard components. The connectors can be separated by pulling down the outer rings. Both sides immediately shut completely, so that no water can leak out. The special N.D.S.L. technology (no drip, no splash, no leak) ensures no water drips, splashes or leaks out while opening the connectors. When the pieces are reconnected, both sides audibly click together and are locked tightly with a double o-ring, which is simply pressed together when reconnecting. This also prevents any deterioration of the o-ring. The mechanism was also designed for longevity, to ensure a secure connections even after several years. Many quick connectors tend to compromise the flow rate. But Alphacool has found a way to solve this problem. These quick connectors can still sustain a high flow rate! Alphacool’s quick connectors are available in two models. In deep black and completely chromatized versions, they fit seamlessly into any system. Technical Specifications: Dimensions (L x D): 64.6 x 23.9mm Material: brass Colour: chrome Thread: 2x 1/4” inner Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit with double bulkhead G1/4 inner thread – chrome Notice: The quick connectors should not be used dry for prolonged periods, as this will put stress on the o-rings and leak tightness can no longer be guaranteed.

Alphacool’s new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a “click” mechanism but are bolted with a nut. The couplings can no longer be unlocked accidentally. The couplings affect the flow rate of your loop only minimally, or not at all. While unlocking, both sides of the coupling seal completely. They have a ¼” internal thread on both sides so your choice of fitting can be used. Technical specifications: Dimensions (L x D): 60.3 x 26.1mm Material: black brass Thread: 2x 1/4 ” Scope of delivery: 1x Alphacool HF quick release connector kit G1/4 – black

Alphacool quick coupling kits were developed for security reasons. For this reason, these clutches do not “click” mechanism but are bolted to a kind of nut. The couplings can be so not accidentally unlock. Through the installation of these couplings, the flow is very low not affected to do. When unlocking both sides of the coupling seal completely. There is a connection for 8mm ID, 11mm OD tubes on both sides. Please take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.

Model: 17359

Alphacool HF quick release connector with bulkhead G1 / 4 IG – Chrome Alphacool’s new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a “click” mechanism but are bolted with a nut. The couplings can be no longer accidentally unlocked. The couplings do not affect the flow rate of your loop. When unlocking both sides of the coupling sealed completely. They have a ¼” internal thread on both sides so your choice of fitting can be used. Technical specifications: Dimensions (L x D): 60.3 x 26,1mm Material: Chrome Thread: 2x 1/4 ” Scope of supply: 1x Alphacool HF quick release connector with bulkhead G1 / 4 IG – Chrome

Features:
1. Durable performance, compact size and easy installation.
2. International standard G1/4 thread adapter.
3. Suitable for computer water cooling system.
4. The outside diameter 9MM/0.35 inch connector is suitable for inner diameter 7-8MM/0.27-0.31 inch hose.
5. The outside diameter 11MM/0.43 inch connector is suitable for inner diameter 9.5-10MM/0.37-0.39inch hose.

Specification:
Name: Water-cooled plate pagoda G1/4 thread
Weight: about 60g/2.12oz
Size: about 12.2*2*1.5cm/4.8*0.79*0.59inch
Thread size: G1/4 (2 points) The actual outer diameter is 12.9MM
Material: brass
Surface treatment: chrome plating
Outer diameter: 9MM, 11MM(Optional)
Application: inner diameter 7-8MM / 0.27-0.31inch hose( 9MM ), inner diameter 9.5-10MM / 0.37-0.39inch hose( 11MM )

Package List:
1 * Hose Connectors for Computer Water Cooling System

Conclusion

By our suggestions above, we hope that you can found pc water cooling quick release connector for you.Please don’t forget to share your experience by comment in this post. Thank you!