Which Is The Best Pc Water Cooling Biocide
Nowadays, there are so many products of pc water cooling biocide in the market and you are wondering to choose a best one. You have searched for pc water cooling biocide in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pc water cooling biocide which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
PrimoChill Liquid Utopia – 15ml Bottle
- Offers full line protection against algae and corrosion. Protects ferrous and non-ferrous metals from corrosion.
- Non-toxic, and biodegradable.
- Can be used in new install(recommended) or existing loops.
- Bottle Size: 15ml. Dosage: Mix with 1 Gallon of DI or distilled water
- Shelf Life: 2 Years, Unopened
As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.
********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.
XSPC EC6 Protect (Biocide)
EC6 Protect – Biocide is a highly effective slow release, long life biocide. Simply add to de-ionised water, purified water, or coolant for years of protection against bacterial growth and algae. EC6 Protect can be used in new system to protect against biological growth, or added to an existing system to neutralise bacteria an algae.
- Highly Effective Biocide
- Slow Release and Long Life
- Low Odour
- Low viscosity
Mix with water at a ratio of 6ml per litre. One bottle will treat 5 litres of water.
Do not mix in a higher than recommended ratio. EC6 Coolants already contain EC6 Protect Biocide.
PrimoChill True Infused – Insanely Concentrated Liquid Pre-Mix (8oz) – Blood Red
True is an environmentally friendly fill and forget coolant solution that alleviates stress and concern over possible leaks in your next computer watercooling system. It provides significant benefits of increased performance and aesthetics without the headaches. True delivers continuous protection against algae and corrosion and is safe for your PC components. Whether you’re new to watercooling, or a seasoned pro, True is the coolant for you .
Bottle Size: 8 fluid ounces
Shelf Life: 2 years (unopened)
Mix Ratio: Add to 1 gallon Distilled Water
Included:1x Sys Prep 15ml / 1x True 8oz
Note:Primary pictures shows fluid mixed and in a reservoir (not included) to illustrate the final color.WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.
PrimoChill True Infused – Insanely Concentrated Liquid Pre-Mix (8oz) – Opaque Sky White SX
- PROFESSIONAL USE ONLY – Requires regular maintenance!
- Waterbased pre-mix concentrate solution.
- Safe on all plastics, rubbers, miscellaneous gasket materials, and acrylic.
- Repeatable True colors every time.
- 2 year shelf life (unopened in original Bottle)
Opaque True is a breakthrough in showcase coolant. The solid color will set the edge on your next build and provide stunning pictures of beauty to be appreciated by all. Opaque is classified as a showcase style coolant but performance is comparable to any of its transparent counterparts.
True Opaque may lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens, immediately drain and flush with DI or Distilled water. Once the system has been drained and cleaned, refill your system with True Opaque fluid once again. True Opaque will over time help neutralize your cooling loop, which will then stabilize the color.
As with all Opaque fluids, buildup of particles in the micro channels of water blocks will occur over time. This buildup can cause the fluid in your system to flow slower and possibly stop flow all together. System pressure also plays a role in how well True Opaque performs. The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of True Opaque coolant. If you notice ANY collection or separation of True Opaque, drain and rinse your system IMMEDIATELY. Running Opaque coolant after it has separated can cause unknown issues and may require the user to open, and clean each individual component in the system.WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.
Opaque True? Instructions (Full instructions included with product)
1. Finish Opaque Sys Prep Instructions. (Requires 48 Hour minimum flush time for new builds and existing system refills).
2. Mix 8oz Opaque True w/ 1 gallon distilled water.
3. Shake casually to incorporate the pre-mix w/ the water.
4. Fill your system w/ fluid using your preferred priming method.
PrimoChill RFB Rigid Tubing Finishing Bit – 12mm ID x 16mm OD
Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:Tube Compatibility: 12mm x 16mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)
PrimoChill System Reboot – Cooling Loop Treatment
Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.
Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes. It is safe to use on rubber, plastics and acrylics
Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear
PrimoFlex Advanced LRT 3/8in. ID x 1/2in. OD Tubing Bundle (10ft Pack) – Crystal Clear (10ft Pack)
- Primoflex Trusted/Experienced Brand
- Inner Diameter:3/8 inch / Outer Diameter:1/2 inch
- Glass-like transparency (Clear LRT) / Logo Free (no print on tube)
- Includes FREE Liquid Utopiaand SysPrep–Cooling Loop Pre-Treatment
- Environmentally responsible, safe and non toxic product
PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.
MAX PC Silver Kill Coil Strip 99.9% Pure Fine Silver For Inhibiting Organic Growth In Liquid Cooling
- 99.9% Pure USA Sourced Fine Silver, Will NOT Corrode Like Other Silver Coils
- Dimensions (Silver Strip): 3.2mm x 0.42mm x 76mm (Over 550mm3 Surface Area)
- Silver Coil Is Highly Malleable And Ready To Be Formed By The User For Their Specific Use
- Each Coil Is Acid Cleaned, Triple Rinsed, And Packaged In An Airtight Container To Minimize Oxidation And Impurities
- Silver Is An Exceptional Antibiotic And Algaecide, Perfect For Inhibiting Growth In PC Water Cooling Loops
Once placed in the water the silver will require 7-10 days to become effective.
PrimoChill SysPrep – Cooling Loop Pre-Treatment
Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes. It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated. While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**
** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.
Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.
By our suggestions above, we hope that you can found pc water cooling biocide for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best pc water cooling biocide: Top-Rated Brands & What to Buy