pinocollection 
Nowadays, there are so many products of parts for sharp microwave oven in the market and you are wondering to choose a best one. You have searched for parts for sharp microwave oven in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings parts for sharp microwave oven which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
20,541 Reviews Scanned
Svance 5 PCS Waveguide Cover, Universal Mica Sheet for All Microwave Oven, Cut to Size, 108mmX99mm, 5 Pack
- UNIVERSAL: Svance microwave oven waveguide cover is universal for all microwave oven.waveguide cover for microwave waveguide cover
- USE FOR: This mica sheet is usually found inside the cavity on the right wall or upper wall of the oven cavity. Protect the microwave oven from burning.
- CUT TO SIZE: The waveguide cover size is 108mm*99mm/4.26in*3.9in, you could cut it into any size to fit your microwave oven. It’s fairly easy to cut using sharp scissors or a craft knife.
- PACKAGE: Packaged with 5 PCS mica sheet. Enough for you replace for your oven.
- ATTENTION : This product is not original but belongs to the aftermarket part. We provide with 12 month warranty, so if you have any question with our product please kindly contact us.
10 PCS Waveguide Cover, Universal Mica Sheet for All Microwave Oven, Cut to Size, 150X120mm, 10 Pack
- UNIVERSAL: VINFANY microwave oven waveguide cover is universal for all microwave oven.
- CUT TO SIZE: The waveguide cover size is 150*120mm, you could cut it into any size to fit your microwave oven. It’s fairly easy to cut using sharp scissors or a craft knife.
- USE FOR: This mica sheet is usually found inside the cavity on the right wall or upper wall of the oven cavity. Protect the microwave oven from burning.
- PACKAGE: Packaged with 10 PCS mica sheet. Enough for you replace for your oven.
- SERVICE: We provide with 12 month warranty, so if you have any question with our product please kindly contact us. We’re 24-hour online. Buy it with confidence.
Sharp Microwave / Convection Ceramic Tray for R1870 Series
- This microwave plate ONLY fits the Sharp models listed below. If you are unsure about compatibility please email us with your model number BEFORE ORDERING.
- Ceramic turntable plate / tray for Sharp over the range microwave / convection ovens.
- Measures approximately 12 7/8 inches in overall diameter.
- Outside diameter of turntable track on bottom of tray is approximately 9 inches.
- This ceramic tray replaces Sharp part # : NTNT-A114WREZ
This tray ONLY fits model numbers listed here. If you are unsure about compatibility please email us with your model number BEFORE ORDERING. PLEASE NOTE: There are some revisions within these models that use a different tray depending on production.*** Please measure the roller wheel / turntable support to make sure the wheels are no more than 4 1/2″ from the center.R1870R1871R1872R1874R1875R1880R1880LSR1880LSTViking Model DMOR205, DMOR205SSViking Model VMOR205
OEM Sharp Microwave Short Or Low Chrome Wire Rack Shipped with R1874, R-1874, R1875, R-1875, R1875T, R-1875T
This Microwave Low Rack is 10 3/4 inches in diameter and stands 2 inches tall. This low rack originally shipped in the following Sharp Microwaves: R1874, R-1874, R1875, R-1875, R1875T, R-1875T If your Microwave is NOT listed above, please send us a message so we may help you obtain the correct part!
Sharp Microwave Roller Assembly FROLPA101WRKZ
- Replacement roller wheel / turntable support for Sharp microwave ovens listed below.
- The roller wheel assembly sits underneath the microwave glass tray and is necessary for the turntable plate to turn.
- Please contact us BEFORE ORDERING if you need assistance confirming compatibility.
- PLEASE CHECK COMPATIBILITY BY LOCATING YOUR MODEL IN THE PRODUCT DESCRIPTION BELOW.
- This roller ring replaces Sharp part # FROLPA101WRKZ.
This turntable support is compatible with the following Sharp Microwave Oven models… R190HK, R190HW, R120DW R200BK, R203BW R201FK, R201FW R202EK, R202EW R203EW, R203FW, R203HW R204CW, R206FW R209AK, R209AW, R209BK, R209HK, R209KK R210AK R214FW, R215EW R216FS, R216LS R220AW, R220BW, R220FW, R220HW, R220KW R230AK, R230AW, R230BK, R230BW R230HK, R230HW, R230KK, R230KW R2A12, R2A43, R2A47, R2A48 R2A52, R2A52A, R2A82, R2A82A, R2F52 R2M52, R2M57, R2M58, R2W38 R305HD, R305HK, R305HW, R305KS, R305MR R306LK, R306LW R308HK, R308HW, R308JK, R308JS R308JSF, R308JW, R308JWF R308KK, R308KW, R308NW, R309JW R310HK, R310HW, R310JK, R310JW R315JS R320HQF, R320HK, R320HQ, R320HW R120, R120DG, R120DR R140DB, R140D-G, R210A, R210D, R210H, R221K, R2221K, R230H, R231J, R231H R240C, R240D, R240E, R2S56 R2S58, R2V54, R2V58, R290HS R330H, 330JS, R330JW, R340H, R350H, R350J, R350LS, R350LW R380H, R397JS, R398K
Baking Rack for Sharp Microwave / Convection Ovens R820 Series
- Metal baking rack for Sharp brand combination microwave / convection ovens in the R820 series.
- This microwave rack ONLY fits the SHARP models listed below. If you are unsure about compatibility please email us with your model number BEFORE ORDERING.
- The diameter of the rack is approx 10 3/4 inches.
- The rack is approx 2 inches” high.
- This rack replaces Sharp part # : FAMI-A104WRM0
This microwave rack ONLY fits the SHARP models listed below. If you are unsure about compatibility please email us with your model number BEFORE ORDERING. R820 R820BC R820BK R820BW R820JS
Fashionclubs 4pcs Microwave Oven Repairing Part Mica Plates Sheets 13cm x 13cm
- Microwave Oven Repairing Part Mica Plates Sheets
- Mica Plate is mica paper with silicone resin by gluing temperature and pressed. As a kind of heat resisting and insulating product. It is widely used for home appliances such as electric hair-dryer, toaster, microwave oven, warmer etc
- Product Name : Microwave Oven Mica Plates
- Material : Mica, Paper Size : 13 x 13cm / 5.1″ x 5.1″(L*W)
- Notice:Easy to be cut into the size according to your own need, so it is suitable for most
- Package Content : 4 x Microwave Oven Mica Plates
The Mica Plates Sheets are replacement sheets to use when your microwave oven is ‘arcing’ around or out of the chamber where the magnetron is located ( small square hole inside the wall of of your microwave oven – a small piece of mica paper covers this chamber ).
Your Original mica sheet will be burnt when a bit of food that splatters the inside of the microwave and left on that paper.
After a few heatings the food ignited and the paper burned from the food that is attached to it, creating a small hole in the mica paper,this paper will solve your problem well.
Buy this paper, carefully measure the location size in your microwave and cut down to fit in the spot. Most microwaves have a slot or groove of some sort where you position ‘tabs’ in this paper to fit depends on the brand.
These sheets are large enough to fit over any size microwave magnetron chamber.
Installation is pretty simple:
You pop out the old microwave sheet, get a pencil and trace the old shape onto the new plate sheet.
Then cut along that shape, and pop the new sheet in.
Microwave Turntable Ring Microwave Oven Rotating Roller Support Ring, Microwave Glass Plate Tray Wheel Ring(Large, 2 Pieces)
- Dimensions: Outer diamater 8.66 Inch /22cm, Inner diamater 8.2 Inch /20.8cm for the diameter of the innermost plastic edge,outer wheels are about 1.45cm/0.57inch tall
- Package Contains: 2 Pieces Large Microwave Oven Glass Carousel Tray Support (Brown)
- Pefect fit: Suit for above 11.8 Inch /30cm microwave glass plate
- Performance: Designs with three small wheel, convenient to keep your food
- Reminder: Please measure the old one diameter of ring and wheels
Package Contains: 2 Pieces Large Microwave oven turntable rotating support ring
Ring Outer Dia : 8.66inch(22cm)
Ring Inner Dia: 8.2inch/20.8cm
Outer wheel Diamater : About 1.45cm / 0.57inch
Suit for above 11.8inch (30cm) glass plate
Please search asin B07DKFGTCV ,for 6.9″ inner diameter microwave roller ring .
Similar items with 4 stars and above
Small 9.6" / 24.5cm Microwave Glass Plate/Microwave Glass Turntable Plate Replacement – For Small Microwaves
- FOR SMALL MICROWAVES. CHECK SIZE BEFORE ORDERING. LOOK AT MEASUREMENT PHOTO. IF YOU HAVE ANY QUESTIONS, PLEASE SEE BELOW. Our microwave glass plate is an ideal replacement for an array of makes and models requiring 9.6″ / 245mm diameter glass plates with 3-part bushing couplers / centerpieces
- GREAT REPLACEMENT AT A GREAT VALUE: Many replacement microwave plates can cost nearly half of the cost of a new microwave. Our replacement is sturdy, robust, and made to last – without the sticker shock! ONLY FOR SMALL MICROWAVES
- ENSURING PROPER FIT: 1) Check your bushing coupler (centerpiece that turns the plate) & ensure it has three notches – these should align w/ the middle of plate. 2) Measure the interior to ensure a 9.6″ diam. plate is ideal (MANY need larger plates)
- COMPATIBLE WITH A VARIETY OF MAKES AND MODELS OF SMALL MICROWAVES: Compatible brands include SMALL MICROWAVES from LG, Sears, Kenmore, Emerson, HighPointe, Panasonic, Tesco, Prestige, Qualex, Daewoo, Swan, Sainsbury, Asda and more
- IF YOU HAVE ANY QUESTIONS ABOUT WHETHER THIS WILL FIT YOUR MICROWAVE, PLEASE CONTACT US THROUGH AMAZON OR ASK A QUESTION. Please note: This is an aftermarket part produced by Impresa Products meeting OEM quality (based on in-house testing). DOES NOT INCLUDE TURNTABLE, ONLY PLATE
IF YOU HAVE ANY QUESTIONS ABOUT WHETHER THIS WILL FIT YOUR MICROWAVE, PLEASE CONTACT US THROUGH AMAZON OR ASK A QUESTION. FOR SMALL MICROWAVES. CHECK SIZE BEFORE ORDERING. LOOK AT MEASUREMENT PHOTO. Our microwave glass plate is an ideal replacement for an array of makes and models requiring 9.6″ / 245mm diameter glass plates with 3-part bushing couplers / centerpieces. GREAT REPLACEMENT AT A GREAT VALUE: Many replacement microwave plates can cost nearly half of the cost of a new microwave. Our replacement is sturdy, robust, and made to last – without the sticker shock! ONLY FOR SMALL MICROWAVES. ENSURING PROPER FIT: 1) Check your bushing coupler (centerpiece that turns the plate) & ensure it has three notches – these should align w/ the middle of plate. 2) Measure the interior to ensure a 9.6″ diam. plate is ideal (MANY need larger plates). COMPATIBLE WITH A VARIETY OF MAKES AND MODELS OF SMALL MICROWAVES: Compatible brands include SMALL MICROWAVES from LG, Sears, Kenmore, Emerson, HighPointe, Panasonic, Tesco, Prestige, Qualex, Daewoo, Swan, Sainsbury, Asda and more. Please note: This is an aftermarket part produced by Impresa Products meeting OEM quality (based on in-house testing).
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy parts for sharp microwave oven, eg:
- What are Top 10 parts for sharp microwave oven for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 parts for sharp microwave oven to buy?
- What are Top Rated parts for sharp microwave oven to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) parts for sharp microwave oven?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for parts for sharp microwave oven.
- Before deciding to buy any parts for sharp microwave oven, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose parts for sharp microwave oven and What you should consider when buying the parts for sharp microwave oven and Where to Buy or Purchase the parts for sharp microwave oven. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 parts for sharp microwave oven of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about parts for sharp microwave oven.
Conclusion
By our suggestions above, we hope that you can found parts for sharp microwave oven for you.Please don’t forget to share your experience by comment in this post. Thank you!
