pinocollection 
Nowadays, there are so many products of ninja cap replacement in the market and you are wondering to choose a best one. You have searched for ninja cap replacement in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja cap replacement which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
44,551 Reviews Scanned
Ninja Blender Replacement Lid for XL Pitcher – BL770 BL771 BL660 BL663 Bl780 NJ602
BLEND PRO Replacement For Ninja 16 Oz Cup Single Serve – For Nutri Ninja BL770 BL780 BL660 Blender (2-Pack)
Replacenent Cup For Nutri Ninja 16 oz Cup with Sip Seal Lid for BL660 BL660W BL740 BL770 BL810 BL820 Blender 2-Pack BY BLEND PRO
Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Genuine Ninja BL770 replacement parts (Lid for pitcher, new model)
NLSD Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins for Nutri Ninja Auto iQ BL480D BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade
- Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) The blade has MALE FINS 3) 4″ (10cm) Diameter.
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- Note2: Be careful of the blade when open the package
NLSD Replacement Parts Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL480-30 BL681A-30 BL682 BL640, ((7 fins) Black
- ⚠ BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) The blade has MALE FINS 3) 4″ (10cm) Diameter.
- 7 fins blade Fits for Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
- Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682.
- 7 fins blade Fits for Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30
- Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
- NOT FIT BL66x,BL77x,BL8xx, NOT FIT model # end with 70 (not fit for BL450-70,BL451-70,BL454-70,BL480-70,BL484-70)BL481-70,BL482-70,BL483-70
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
7 FINS Nutri Ninja Pro Extractor Blades Assembly Works with these models:
(1) Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
(2) Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682
(3) Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30
(4) Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30 (Only fit for 18oz, 24oz, 32oz not fit for 16oz)
NOT FIT for: 6 pins, model# end with 70, BL6XX, BL7XX, BL8XX, NJXX
NOT FIT For: BL620C, BL660, BL663, BL682, BL201, BL610, NJ600, BL740, BL772, BL771, BL770, BL682, BL830, BL780, BL810 BL820 BL830
Warranty Policy
*All products sold by NLSD are covered by 3 months warranty.
*NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
*If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
*Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Replacement Extractor Blade 7 Fin For Nutri Ninja 1000W Auto iQ BL682 BL642 BL641 Blender
- nt part for Nutri Ninja Blender, make your Juicer reuse again and perfect for all your blending and mixing needs.
- BPA Free, Effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture.
- Fits for BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30
- Please check your existing blade by counting the fins before purchase. It Should Be 7fin
- 100% SATISFACTION GUARANTEE
One Ninja replacement blade assembly (7-fin as pictured)for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
Cross Blade Spare Replacement Part for Magic Bullet Blender, Juicer and Mixer (Model MB1001)
- MADE FOR THE ORIGINAL MAGIC BULLET (MB1001): These cross blades were made exclusively for your Original Magic Bullet (MB1001). WILL NOT WORK WITH ANY OTHER BLENDER MAKE OR MODEL.
- WILL NOT WORK WITH NUTRIBULLET OR BABY BULLET: For use with the Original Magic Bullet model MB 1001 ONLY. Will NOT work with any other blender make or model.
- EACH BLADE COMES WITH A HIGH-QUALITY GASKET: Prior to use, check each gasket to ensure it is not damaged, and it is completely seated in the cross blade unit.
- STAINLESS STEEL AND DISHWASHER SAFE: Each replacement part comes with angled blades that make it easier to power through frozen fruit. Quickly whips up your favorite foods and smoothies helping you put together healthy meals faster.
- PERFECT FOR CHOPPING, GRATING AND BLENDING: Our cross blade replacement part is perfect for chopping, grating and blending. Quickly whips up your favorite healthy foods and smoothies.
These replacement cross blades are for the original Magic Bullet model (MB 1001) only! Will not work with Nutribullet or Baby Bullet or any other blender make or model.
Our blades are made of high quality stainless steel and provide the same cutting power the original ones do. Plixio cross blades are made under strict supervision with top notch quality control. Plixio replacement blades come with a new gasket and allow you to use the product right out of the box.
Our blades mimic the Magic Bullet cross blades and help you achieve the same cutting power as the original blades. Ideal for smoothies, frozen drinks, pesto and salsas.
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ninja cap replacement, eg:
- What are Top 10 ninja cap replacement for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ninja cap replacement to buy?
- What are Top Rated ninja cap replacement to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja cap replacement?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja cap replacement.
- Before deciding to buy any ninja cap replacement, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ninja cap replacement and What you should consider when buying the ninja cap replacement and Where to Buy or Purchase the ninja cap replacement. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ninja cap replacement of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja cap replacement.
Conclusion
By our suggestions above, we hope that you can found ninja cap replacement for you.Please don’t forget to share your experience by comment in this post. Thank you!
