pinocollection 
Nowadays, there are so many products of inkbird thermostat cooling in the market and you are wondering to choose a best one. You have searched for inkbird thermostat cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings inkbird thermostat cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year
Package Included:
1 x Temperature and Time Controller
1 x Manual
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
- ????????Fahrenheit and Celsius Display Can Be Choose
- ????????Alarm When Temperature Exceeds the Limit or When Sensor Error
- ????????2 Relays, Switch Between Cooling and Heating Modes
- ????????Control the Temperature by Setting the Temperature Set Value and the Difference Value
- ????????Temperature Calibrating, Refrigerating control output delay protection
Inkbird C929 Wi-Fi Digital Smart 120VAC 1200W Temperature Controller iOS Android System Smartphone Heater ＆ Cooler Thermostat for Heating or Cooling Applications
- You can control, monitor and schedule your electrical appliance temperature devices with your smart phone anywhere over.
- The WIFI smart temperature controller can be enabled people to be more productive and more creative. WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
- With plug and play design, C929 can free up your energy and time from DIY thermostat processes.
- Support reading with Centigrade or Fahrenheit.
- Temperature calibration, High/Low temperature limit setting alarm, probe abnormal alarm, Heating or Cooling can be chose, support Cooling Delay Protection.
Specification:
Power: Voltage:120Vac 60Hz, Current:10A,
Wattage:1200W
Type of temperature probe: R25℃=10KΩ±1%, R0℃=26.74~27.83KΩ, B25/85℃=3435K±1%
Temperature measurement range: -40~100℃/-40~212℉
Temperature display accuracy: 0.1℃/℉ (<100℃ ),="" 1℃/℉(="">=100℃/℉)
Ambient temperature: -20 ~60℃/-4 ~140℉
Storage environment temperature: 0~60℃/32~140℉
Storage environment humidity: 20~80%RH (Unfrozen or condensation state)
Sensor Length: 2m / 6.56ft
Sensor Type: NTC sensor (Including)
Controller:2 years warranty
Temperature Probe:1 year warranty
Product Features:
*Plug-n-play, easy to use.
*WIFI smart controller supports both IOS & Android
*WIFI : 2.4GHz Wi-Fi router
*Free APP “InkbirdSmart” which is able to monitor temperature at any time
*Support reading with Centigrade or Fahrenheit, temperature calibration,cooling delay protection
*High/Low temperature limit setting alarm, probe abnormal alarm
Package Content:
1x Wi-Fi Smart Temperature Controller
1x Short temperature sensor probe
1x User manual
Heating Thermostat Aquarium Probe Sensor Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V 1200W NO Cooling
- ONLY heating outlet aquarium sensor heater for aquarium, reptile.
- It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the needs of aquarium.
- This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control.
- The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- ℃ / ℉ Display can be chosen. Temperature calibration
- Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
Features:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating, No cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: aquarium sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature:-20~ 60 ° C / -4~ 140 ° F
Humidity:20~85% (No Condensate)
Dimension:
Body:140x68x33mm (5.5×2.7×1.3 inch.)
Socket:85x42x24mm (3.3×1.7×1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
Temperature calibration
Over-temperature and sensor fault alarm
Warranty: 1 Year
Package Content:
1x Temperature controller ITC-306T with Aquarium Probe
1x Manual
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit
- ????????There are two relays. Switch between cooling and heating modes. Support for °F / °C display.
- ????????Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
- ????????By setting the temperature set-point and the difference between the temperature set-point and the difference.
- ????????Alarm when temperature is out of limit or sensor is wrong.
- ????????Switch between refrigeration and heating modes, temperature calibration.
Conclusion
By our suggestions above, we hope that you can found inkbird thermostat cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
