pinocollection 
Nowadays, there are so many products of heating return vents in the market and you are wondering to choose a best one. You have searched for heating return vents in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating return vents which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
30"w X 12"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 31.75"w X 13.75"h]
- 30″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 13.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
30″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 13.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
30"w X 8"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 31.75"w X 9.75"h]
- 30″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 9.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
30″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 9.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
16"w X 4"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 17.75"w X 5.75"h]
- 16″w X 4″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X 5.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
16″w X 4″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X 5.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
16"w X 12"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 17.75"w X 13.75"h]
- 16″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
16″w X 12″h Steel Return Air Grilles – Sidewall and Cieling – HVAC DUCT COVER – White
16″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
14"w X 12"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 15.75"w X 13.75"h]
- 14″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
14″w X 12″h Steel Return Air Grilles – Sidewall and Cieling – HVAC DUCT COVER – White
14″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
14" X 24 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 16.5 X 25.75]
14″ X 24 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 16.5 X 25.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Magnetic Vent Cover (3-Pack),Merya Vent Cover Decoration 7.8"×15.7" Compatible with All Matierials for Floor,Wall,Ceiling
- [ Stronger magnet] with 1.2mm thickness stronger magnet while general cover is 0.8mm ,the thick vent cover sticks to your floor/ceiling/wall vents tightly.you won’t worry slip.
- [Compatible] we offer a 3M traceless magnet stripe which makes the vent cover compatible with all material types,not only used for steel vent cover,but also for aluminium,painted,plastic or woody
- [Lower Energy Cost ] by placing the vent cover on wall/ceiling to seal off airflow and makes home more comfortable . when winter,it could keep cold air in
- when summer,keep cold air out
- [Perfect Size] 3 pieces/pack 7.8*15.7*0.047inches eaisly trimmed with scissors to any size and shape you need
- [Easy Installation]just tear off the wrapping paper and stick to where you want .easily installated by one person
If you need to cover your floor,wall,ceiling,vents and don’t want to use thin paper , look no further than the 1.2mm thickness magnetic vent cover of 3-pack.
Compatible with all types material
The special benefits of the stronger magnetic vent cover is that we offer a 3M traceless magnetic stripe to make it compatible with all material vent types while other vent cover only can be used on steel materials.
Stronger magnetism and stronger adsorptive force
You won’t worry that the vent cover will slip down,because the material of this product is stronger heterosexual double-sided rubber magnet,while others use single-sided magnet.So,this can stick on the wall tightly.
excellent after-sales service and one-year warranty
Are you still worried about the imperfect after-sale service?No worry that anymore,we promise. we offer an one-year warrenty,during the guarantee period,if the product has any qustion,you can contact with us.We promise to solve your problem as soon as possible.
Are you still hesitating?Don’t hesitate,we believe this will be a wise choice for you.
Take them to home to avoid the airflow to keep your home warm or cool according to your need.
Rocky Mountain Goods 4" x 10" Floor Vents 2 Pack – Heavy Duty Walkable floor register – Premium Finish – Easy adjust air supply lever (Brown)
Rocky Mountain Goods 4″ x 10″ Floor Vents 2 Pack comes with two heavy duty floor registers made to fit 4″ by 10″ duct openings. While many floor grills look the same, our floor registers are made with high grade steel for heavy duty use. The premium matte finish is double coated to ensure the color for its lifetime of use. The easy adjust levels allows quick change of flow rate and can even been done with your foot. This floor resister is made to fit a 10 Inch by 4 Inch HVAC hole. The actual floor register outer dimensions are 5.5” by 11.5”. Like all Rocky Mountain Goods products this floor vent comes with a lifetime warranty.
6" Round Return Air Vent Grille with Sponge Gasket and Mounting Frame – HVAC Vent Duct Register Cover [Outer Dimensions: 8"]
- 6″ Diameter Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 6″ Diameter
- Easy To Install – Complete set of sponge gasket and mounting frame included
- Adjustable Airflow Control – By rotating the middle disk, the gap will expand and retract to meet perfect air supply needed.
- Mounted with frame and bayonet joint which are included.
- Circular Return Air Valves – Designed To Be Used In Low And Medium Pressure Ventilation Air Conditioning Systems, Of up To 300m3/h.
6″ Round Return Air Vent Grille With Sponge Gasket And Mounting Frame – HVAC Vent Duct Register Cover. Suitable For Wall & Cieling Applications.
6″ Diameter Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 6″ Diameter.
When it’s time to upgrade your HVAC Vents in your house, this piece is the perfect touch of class you need to add to your decour.
Easy To Install, and Fully Adjustable to meet exact amount of Airflow needed.
High Standard Quality – Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2″.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
Similar items with 4 stars and above
14"w X 10"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 15.75"w X 11.75"h]
- 14″w X 10″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X 11.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
14″w X 10″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X 11.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found heating return vents for you.Please don’t forget to share your experience by comment in this post. Thank you!
