pinocollection 
Nowadays, there are so many products of heating element for hot water heater in the market and you are wondering to choose a best one. You have searched for heating element for hot water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating element for hot water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Camco 02482/02483 1650W 120V Screw-In Water Heater Element – High Watt Density
Product Description
1650W, 120V, Water Heater Screw-In Element, Use For 6 Gallon Water Heaters.
From the Manufacturer
Camco’s 1650W 120V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02142/02143 1500W 120V Screw-In Water Heater Element – High Watt Density
Product Description
Camco RV 1500 Watt Universal Element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included. 1500w – 120v.
From the Manufacturer
Camco’s 1500W 120V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02282/02283 3500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3500W/240V Screw-In Element 02283
From the Manufacturer
Camco’s 3500W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02202/02203 2000W 120V Screw-In Water Heater Element – High Watt Density
Rheem SP610160 Element – 4500W CO U F
Product Description
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
From the Manufacturer
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
Commercial Electric Water Immersion Heating Element Brass (5000 Watt)
5000 Watt. 1 Phase. 208V Buffet table, steam table immersion heating element. Front View A =10″
Rheem SP10869PH Screw-In 240-volt by 5500-watt Element, Premium Resistored Stainless Steel
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Watt Density Classification: MWD, Input Voltage (V): 208, Input Voltage (V): 240, Wattage at 208V (W): 4130
- Watt Density at 208V (W/sq. in.): 85, Wattage at 240V (W): 5500, Watt Density at 240V (W/sq. in. ): 113, Cold Resistance (ohms): 10.50
- Element Diameter (in.): .316, Element Length – Flange to Tip (in.): 13.47, Mounting Type: Threaded, Actual Thread Size – Outside Diameter(in.): 1-9/32
- Thread Type Series Designation: NPSM, Configuration: Fold back, Nominal Thread Size – (in.): 1, Threads per Inch: 11-1/2
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Camco 04602/04603 4500W 240V Universal Flange Water Heater Element – High Watt Density
Product Description
4500W/240V Universal Flat Element 04603
From the Manufacturer
Camco’s 4500W 240V Universal Flange High Watt Density Water Heater Element will work in most brands of American, AO Smith, Bradford White, Craftmaster, GE, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Richmond, Rudd, Sears, and State. HWD elements are the most common; same as original equipment provided with most water heaters. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Conclusion
By our suggestions above, we hope that you can found heating element for hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
