pinocollection 
Nowadays, there are so many products of ender 3 heating cartridge in the market and you are wondering to choose a best one. You have searched for ender 3 heating cartridge in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ender 3 heating cartridge which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)
- 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm
- Length: 20mm
- Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire
- Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention
- Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
- 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend
BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 24V 50W Ceramic Cartridge Heater
WINSINN 24V 50W Heater Cartridge 620 Heating Tube HT-NTC100K Thermistor 1M for Ender 3 CR-10 Sensor Heater Block V6 J-Head Hotend Extruder 3D Printer (Pack of 5Pcs)
- ✔️Voltage: 24V, Power: 50W, Head diameter: 6mm, Head length: 20mm, Total length:1 Meter
- ✔️From the original ordinary 0.3-line high-temperature line to 0.6-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- ✔️From the original 40W power up to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃ or so.
- ✔️The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
- ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
►Voltage: 24V
►Power: 50W
►Heating head size: 6 x 20mm
►Total length:1 Meter
►Heating head material: 304 stainless steel
►Heating temperature: up to 350 degrees
►Fit for New Sensor Heater Block
—————————————————————————————————————
Package include:
►5 x 24V 50W Ceramic Cartridge Heater
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
Sunhokey 24V 40W Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10S Pro, CR-X,Ender 3,Ender 3 Pro, Prusa Mendel(Pack of 10pcs)
- Cartridge Heater Material : 304 stainless steel ,the core is made of Nickel-chromium alloy.
- Parameters：24V 40W, 6*20MM(Lead length 1M)
- Thermistor :Temperature sensor 100KΩ accuracy of ± 1%
- Features：High sensitivity, rapid response,easy installation, wide temperature range, good stability, high reliability.
- Customer Service：If you receive any damaged or not working products, please contact us, you will be free to renew.
Product 1: Cartridge Heater
Material: stainless steel
Core: Nickel-chromium alloy
Resistance: 2080 high temperature resistant high quality oxide powder
Voltage: 24V
Power: 40W
Diameter: 6mm
Length: 20mm
Wire Length: 1m
Product Usage: mold heating, hot core box, core shooting machine and other media equipment heating
Product 2: Thermistor
High sensitivity, rapid response, compact structure, easy installation, wide temperature range, good stability, high reliability, Can provide different R, B value products,strong interchangeability and high precision.
The main technical parameters of the product:
Nominal resistance: R25 (25 ° C): (commonly used) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
Resistance accuracy: ±1%, ±2%, ±3%
B value R25/50: (common) 3435K, 3600K, 3950K, 3990K, 4100K, 4200K, etc.
B value accuracy: ±1%
Operating temperature range: -40 ° C ~ +300 ° C
Dissipated power factor: ≥5 mW/°C (in static air)
Maximum rated power: 45mW
Thermal time constant: ≤ 7S (in static air)
Temperature coefficient of resistance: -2~ -5% / °C
Recommended parameters: R25°C=100K B25/50=3950K±1%
Package Included:
5X Thermistor
5X 24V 40W Cartridge Heater
Creality 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro,Prusa Mendel,Anet E10 (Pack of 5pcs)
- Heater Voltage: 24v, Power: 40w
- Heater Diameter: 6mm
- Length: 20mm
- Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
- Package included: 5Pcsx 24V 40W Cartridge Heaters
- If you have any question or problem,please feel free to contact us
Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer, etc.
Cartridge Heater Description:
Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
The heating wire inside which is wound onto a ceramic core
The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
Package Included :
5*24V Cartridge Heater with 1m wiring
SDTC Tech 24V 40W 620 Ceramic Cartridge Heater with 1 Meter Long high Temperature Teflon Insulated Wiring for 3D Printer Prusa Mendel (2pack)
- Ceramic Cartridge Heater, Voltage: 24V, Power: 40W, a great accessories of 3D printer extruder.
- Heater Material: 304 Stainless Steel, Diameter: 6mm, Length: 20mm.
- Conveniently pre-wired with 1 meter long high temperature Teflon insulated wiring.
- The heater has a high corrosion prevention because of cylindrical stainless steel tube.
- Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
Specification:
Voltage: 24V
Power: 40W
Diameter: 6mm
Length: 20mm
Wire Length :1m
Package Include: 2 pcs Ceramic Cartridge Heater
WINSINN Removable 24V 40W Heater Cartridge 620 Ceramic Hotend Works with Creality Ender 3 5 CR10 CR-10 CR10 Anet A8 3D Printer (Pack of 5Pcs)
- ✔️Removable design, easy to install:))
- ✔️Voltage: 24V, Power: 40W
- ✔️Head diameter: 6mm, Head length: 20mm, Total length:1 Meter
- ✔️Heating head material: 304 stainless steel
- ✔️Made by WINSINN. Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
►Removable design, easy to install:))
►Voltage: 24V
►Power: 40W
►Heating head size: 6 x 20mm
►Total length:1 Meter
►Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
—————————————————————————————————————
Package include:
►5 x 24V 40W ️Removable Ceramic Cartridge Heater
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
R REIFENG Heating Tube 620mm Reprap 24V 50W Thermistor Ceramic Cartridge Heater for Hotend J-Head Extruder 1M 3D Printer Parts(Pack of 2)
- From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- The original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃
- The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
- Support the customization of different specifications, length, resistance of the heater.
- Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).
Product specification
Voltage: 12V/24V
Power: 50W
Heating head size: 6 * 20mm
Heating head material: 304 stainless steel
Line length: 1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Heating temperature: up to 350 degrees
Package included:
2 Pcs
Single-ended heater instructions
1. The effective heating part of the heater must keep dry.
2. The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded.
3. Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases.
4. Electric components should be stored in a dry place.
3D Printer Cartridge Heater 24V 40W 6x20mm 3PCS for Reprap Prusa i3 for Ender 3 Eewolf
3D Printer Cartridge Heater 24V 40W 6x20mm 3PCS for Reprap Prusa i3 For Ender 3 Eewolf
Wire Length :1m
Voltage: 24V, Power: 40w
Recommended working temp:
PLA (180°C-210°C)
ABS (220°C-240°C)
2080 High-temp resistant Oxidized powder
Germany imported Ceramic Cartridge Heater Wire
Suitable for 24V 3d printers such as creality ender 3
Conclusion
By our suggestions above, we hope that you can found ender 3 heating cartridge for you.Please don’t forget to share your experience by comment in this post. Thank you!
