pinocollection 
Nowadays, there are so many products of conduit heating blanket in the market and you are wondering to choose a best one. You have searched for conduit heating blanket in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings conduit heating blanket which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
CURRENT TOOLS PVC Heater – Electrical Heater For PVC Conduit Bending with Reflective Interior & Carrying Handle – 450
- DURABLE MAKE – This Current Tools PVC heater is made for quick and easy heating of PVC in the workplace
- EVEN HEATING – Highly reflective interior for even heating
- HIGH STRENGTH – This Current Tools heater is 115 vac, 7000 watts, and 15 amps
- EASY USE – This PVC heater has a full length door allowing for easy loading and removal of PVC conduit
- MADE IN THE USA – Proudly designed and crafted in the US
The Current Tools 450 Electric PVC Heater for 1/2″ – 2″ conduit is manually operated with a lighted ON/OFF switch for superior visibility. The full length door allows for easy loading and removal of PVC conduit. A highly reflective interior ensures even heating from the 115 vac-1700 watt – 15 amp electric heater. Made in the USA with a carrying handle for added convenience.
Similar items with 4 stars and above
Greenlee 859-4 PVC Conduit Plug Set
Product Description
Pvc material; 40, 80 schedule; 2 to 4 inch Trade Size; includes 2 to 4 inch plug and carrying case; Used on PVC heating blanket/electric heater
From the Manufacturer
Greenlee’s PVC plug set is for use with PVC heating blankets or electric heaters to plug the ends of the PVC being heated.
Stalwart 75-hblanket Electric Car Blanket- Heated 12 Volt Fleece Travel Throw for Car and RV-Great for Cold Weather, Tailgating, and Emergency Kits by -BLUE
- CAR ADAPTABLE- This soft 12-volt electric blanket plugs into any car, truck, SUV or RV cigarette lighter. Heats up quickly, and stays warm until you unplug it.
- LONG CORD- Equipped with a 96-inch-long cord, even passengers in the backseat can stay cozy on cool weather road trips with this heated fleece throw.
- LIGHTWEIGHT AND WARM-This lightweight auto blanket has thin wire that still gives off warm and comfortable heat. Blanket folds easily so it can be stored in a car trunk or in backseat without taking up too much space.
- GREAT GIFT- This travel throw is the perfect cold weather accessory! Great for vehicle emergency kits, camping and tailgating, it’s a thoughtful gift for your friends and family this winter season.
- PRODUCT DETAILS- Dimensions: 59” (L) x 43” (W), Cord length: 96”. Material: 100% Polyester. Color: Blue. Care: Spot clean only- do not machine wash. Includes storage case with handles.
Product Description
Stay warm this winter with the Electric Car Blanket by Stalwart-the perfect cold weather accessory for your car or emergency kit. Plugs right in to your cigarette lighter, and with a 96-inch cord, this 12-volt fleece throw can even reach backseat passengers. Great for cars, trucks, SUV’s and RV’s, this heated throw will keep you warm while you travel, making it ideal for road trips, tailgating or camping! SATISFACTION GUARANTEED: Stalwart is committed to providing the consumer with the absolute best price and value on our entire line of products, which we ensure by applying a rigorous quality control process. NOTE: This is an exclusive product of Stalwart and ONLY Electric Car Blanket by Stalwart is GUARANTEED to be genuine. IMPORTANT: Avoid buying counterfeit products and transacting with unauthorized sellers. Look for our logo on the packaging for every one of our products. Stalwart is a registered trademark protected by U.S. Trademark law and will be vigorously defended.
From the Manufacturer
Keeping warm in and out of your vehicle just got a lot easier. The electric car blanket allows you or your passengers extra warmth. Stitched from 100 percent polyester fleece, this large electric blanket is comfortable, functional and safe. Use it to keep your seat warm when the mercury drops. Or wrap yourself up while cruising around in your convertible with the top down. You’ll be the toast of the tailgate when you unfurl this blanket. And its 8 feet long cord means you can extend its range well beyond the back seat. The electric car blanket is gentle on your car’s battery and safe for extended use. And the electric car blanket’s generous size, 42-Inch by 58-Inch, is large enough to stretch across two front seats or cover an entire back row of most cars, trucks and SUVs.
Moving Blanket for Protecting Furniture- Heavy Duty Recycled Cotton Padded Tarp, Multi Purpose- Pets, Camping, Hunting, Picnics and More by Stalwart
- PROTECTION- Recycled cotton padding works hard to protect your belongings and vehicles from damage during a move or while in storage! Padding also creates a soft surface for camping or picnics.
- MULTI USE PAD- This versatile pad can protect furniture and vehicles from dings and scratches during a move, cover couch to prevent pet damage, use for sound absorption, cover stored belongings to prevent dust or moisture buildup and more!
- RECYCLED MATERIALS- The soft, protective padding that fills this double sided blanket is made from a soft recycled cotton material that is good for your furniture and the earth.
- DURABLE QUILTED BUILD- Zig zag double stitching on this packing blanket combined with cloth binding on all corners and edges make for a long lasting, strong multi use blanket! 100% Polyester cloth build ensures multiple uses and a long life for this pad.
- PRODUCT DETAILS- Dimensions- 73.5 inches(L) x 80 inches(W). Care- Can be used multiple times without washing. Not machine washable. Hand wash with cold water only. Material- 100% non-woven polyester cloth and recycled cotton padding. Color- blue, black.
HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- Copper
Similar items with 4 stars and above
Morris Products PVC Pipe Conduit Bender – Permanently Bends 40 PVC Up to 90 Degrees – Eliminates Need for Heating Blankets, Heat Guns – 1 Inch
- EASY TO USE: This PVC Pipe Conduit Bender from Morris Products simplifies the process of bending PVC Pipe 40, ultimately reducing the number of PVC fittings needed.
- BENDS UP TO 90 DEGREES: While working on residential or commercial projects, you can easily insert the pipe spring into the pipe and bend across your knee. Each PVC Pipe Conduit bends up to 90 degrees.
- ELIMINATES NEED FOR EQUIPMENT: Toss out those heating blankets and heat guns when you’re equipped with this PVC Pipe Conduit Bender that bends easily without heat in environments that are above 60 degrees Fahrenheit.
- MULTIPLE SIZE OPTIONS: Find just the right size you need in a PVC Pipe Conduit Bender with options that include ½”, ¾”, 1”, 1 ¼” and 1 ½”.
- COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.
Morris Products PVC Pipe Conduit Bender
Eliminate the need for heat guns or heating blankets when you can easily insert pipe springs into this PVC Pipe Conduit Bender and bend the unit across your knee. This PVC Pipe Conduit Bender from Morris Products bends Schedule 40 PVC up to 90 degrees without the risk of pipes collapsing. Use fewer PVC fittings to maximize your tasks and your supplies when you have this pipe conduit bender as part of your electrician’s tool box.
These PVC Pipe Conduit Benders should be used in residential and commercial environments where the room temperature is above 60 degrees Fahrenheit. Find just the right size you need in a PVC Pipe Conduit Bender with options that include ½”, ¾”, 1”, 1 ¼” and 1 ½”.
Morris Products is a premium manufacturer of lighting and electrical products that include meters and testers, organizational devices, power connectors and tools. Established in 1994, Morris Products is headquartered in Queensboro, New York.
Features:
– For PVC Pipe 40
– Bends Up to 90 Degrees
– Easily Bends Across the Knee
– Eliminates Need for Heat Guns, Heating Blankets
Package Includes:
– 1 x PVC Pipe Conduit Bender
Scroll up & click ‘ADD TO CART’ to get yours
ACE Current Tools 441 PVC Heater Blanket 1/2" – 1 1/2" for PVC Conduit Bending
ACE CUR-441 PVC Heater Blanket 1/2″ – 1 1/2″
Frost King SP60 All Season Water Heater Insulation Blanket, 3” Thick x 60” x 90”, R10
3″ thick x 60″ x 90″ R10 vinyl backed fiberglass insulation jacket is designed for gas, oil, or electric water heaters up to 60 gallon size. Package contains a roll of plastic tape.
Similar items with 4 stars and above
UT Wire 15FT Cable Blanket High Capacity Low Profile Cord Cover and Wire Protector – Gray
- THE MOST COMPACT LOW-PROFILE CORD PROTECTOR – Ultra Slim Low profile Floor cord and wire cover is intended for all types of surfaces such as concrete, tile, stone, vinyl, wood, laminates, and short cut pile carpet etc to keep floors safe from tripping hazards while being clean and tidy of unsightly clutter.
- ADHESIVE-READY – Cable Blanket comes ready for installation. Simply peel off the pre-attached adhesive and cover your desired cords and stick to the floor.
- FLEXIBLE CAPACITY – With a flexible protective capacity the Cable Blanket allows you to fit up to 10 ethernet or 5 power strip cables.
- SOFT & FLEXIBLE – Can easily be cut to any desired length with a sharp pair of house-hold scissors.
- PRODUCT DIMENSIONS: 180″ L x 4″ W x 0.125″ H
Experience versatility in a floor cord protector like never before with the Cable Blanket. Made with a soft and flexible rubber, the Cable Blanket forms itself to the amount of cables tucked underneath for the lowest profile possible. Following the Do-It-Yourself theme, this cord cover comes adhesive-ready and easily cut to adjust length. Installation is a breeze; just peel the adhesive seal, stick, tuck in cables, cover, and enjoy a trip-free floor!
Greenlee 849 120 VAC 20 Amp Electric PVC Heater/Bender – 1/2" – 2"
- Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable, remove and form bend Sturdy double wall metal with fiberglass insulation and reflective interior for fast, even heat Full length door for easy PVC loading and removal Other features include on/off switch, pilot light and carrying handle
About the Greenlee 849 120 VAC, 20 Amp Electric PVC Heater/Bender (1/2″ 2″) Often times, the simplest way to get a great bend from PVC piping is to heat it first. When it comes to heating PVC, the Greenlee 849 120 VAC, 20 Amp Electric PVC Heater/Bender is by far the best solution on the market. Not only is it backed by Greenleersquo;s prestigious legacy for producing top quality equipment, but it also has the specs to back it up. Simply preheat the Greenlee 849 for ten minutes, insert your PVC piping to receive heat, rotate it until it becomes pliable and watch as your bend is made to absolute perfect specifications. Whatrsquo;s more, this unit is manufactured with fiberglass insulation all the way through, meaning that heat is distributed evenly and quickly over your PVC piping. The Greenlee 849 Electric PVC Heater/Bender even includes features that other devices just donrsquo;t have, including an easy to operate on/off switch, pilot light and carrying handle. If yoursquo;re looking to get the best bend out of your PVC piping, bring this device to your work place and watch as every PVC bend is made to exact specifications.
Conclusion
By our suggestions above, we hope that you can found conduit heating blanket for you.Please don’t forget to share your experience by comment in this post. Thank you!
