Which Is The Best Coconut Inline Water Filter

Membrane Solutions Inline pre/post Carbon Filter

The post carbon filter is made of coconut shell granular activated carbon. It is well known as the last stage of standard Reverse Osmosis filtration system. It can improve water tasting quality and remove any traces of chlorine, organic chemicals, bad tastes and odors due to its highly porous activated carbon. As its unique filtration performance, it is ideal for refrigerators, icemakers, coffee machines, water coolers and more. Membrane Solutions carbon filter is the best choose for your home filtration.

Specification
Inline GAC carbon filter/pre/Post carbon filter
Micron rating: 5 Micron
Size: 10” x 2”
Connections: 1/4” Female Thread
Max. Pressure: 80 psi
Max Temperature: 104°F (40°C)
Material: Premium Quality Coconut Shell Carbon
Lifetime: Replace the cartridge every 12 months or earlier——Depending on your water quality.

Features
High standard filtration
-Made of 100% food-grade material. Outer layer is pure polypropylene and inner layer is coconut shell carbon. The sediment PP microfibers in both ends ensure long lasting filtration and prevent carbon leaks.
– High rejection rate of chlorine, organic chemicals, tastes and odors, provides clean and pure water for drinking, showering, cooking, etc.

Easy to Change filters
– Individually wrapped and sealed
– Easy and quick filter change with 1/4” female thread in both ends. Just remove the tubes and thread fittings from the old filter and thread the fittings to the new replacement filter and plug in tubes.

What you get:
3 * T33 Water Filter

The CuZn UC-200 Under Counter Water Filter works beneath any home or office sink to filter up to 50,000 gallons of cold water on demand. Replace the UC-200 every 50,000 gallons or 5 years, whichever comes first. In addition to Micro Sediment Membranes, the UC-200 utilizes a patented combination of KDF-55 Filtration Media and Virgin Acid Washed Catalytic Coconut Shell Carbon Filtration Media that have been tested to NSF standard 42 and 61. The UC-200 will reduce a wide variety of organic and inorganic contaminants including but not limited to: chlorine, water soluble cation heavy metals (lead, mercury, chromium VI, cadmium, etc.), herbicides, pesticides, sediment, algae, molds, bad taste, odors and other undesirable contaminants that may effect the quality of your water supply. The UC-200 DOES NOT REDUCE TDS, a TDS or PPM meter is not effective for this type of filter. Use DPD#1 Chlorine Test Strips & replace when chlorine breakthrough is detected. Want TDS Removal? Search ASIN#B019N7VG1W to view CuZn’s RO System. The UC-200 purifies the water selectively, allowing beneficial mineral content to remain. Hardness Minerals (calcium & magnesium) will pass through the UC-200, the UC-200’s KDF-55 Media stage may reduce hard scale formation on heating elements like coffee makers but not eliminate it entirely. Unlike carbon only filters, bacteria can’t grow inside the bacteriostatic CuZn UC-200 Water Filtration System. The UC-200 requires virtually no maintenance and installs in about 5 minutes, hooking up to the cold water supply. When you turn on the cold water of your sink, it will all be CuZn pure. New video installation instructions are available, visit our website or search UC-200 Water Filter Install on Youtube. CuZn Water Systems, Est. 1987 UC-200 Features: Capacity: 50000 gallons, Contents: KDF-55 Filtration Media and Acid Washed Catalytic Coconut Shell Carbon. Flow rate: 2 gpm. Product Type: Undersink Water Filtration System. Country of Manufacture: USA

This Hydronix ICF-10Q inline coconut filter has 1/4″ quick-connect connections and is suitable for drinking water filtration applications. This NSF Certified inline coconut filter is used as a Post/Polishing filter in Revers Osmosis System and is also ideal for use water filtration applications such as ice makers, water coolers, coffee makers, and refrigerators. With the 1/4″ Quick Connect ports this filter is easy to install in any system, just push in the hose and your installation is complete. This filter is made from coconut shell Granular Activated Carbon (GAC) to reduce unpleasant taste and odor from drinking water. It has a service life of 2,000 gallons (or one year) and a flow rate of 0.5 gallons per minute (gpm). This filter has a 2″ outside diameter (OD) and an overall length of 10″. It has an operating temperature of 35 to 100 degrees F, and a maximum pressure rating of 125 pounds per square inch (psi).

This APEC Essence polishing carbon filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. This inline filter has no glues or binders, that may cause contamination, used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, No-Leak seal. The threaded connections are precision cut by machine resulting in the most accurate and repeatable thread possible. Composed of acid-washed carbon media, this high quality post-filter is designed for maximum chlorine, taste & odor reduction.

HYDRONIX-ICF-10 Features: -Unique internal design improves contact time with the filter media for better contaminant reduction. . -Uses coconut shell granular activated carbon to reduce chlorine, sediment and a variety of organic and inorganic contaminants. -Made in the USA. Country of Manufacture: -United States. Product Type: -Reverse-osmosis. Filter Component: -Replacement filter. Dimensions: -0. 25″ FNPT. Overall Height – Top to Bottom: -9. 4″. Overall Width – Side to Side: -4. 6″. Overall Depth – Front to Back: -3. 8″. Overall Product Weight: -0. 7 lbs. Specifications: NSF Certified: -Yes.

Product Description

The Omnipure K-Series K2533-JJ filter is a post R.O. acid washed GAC inline water filter. This filter has 1/4 quick connect fittings that make it really easy to install and replace. This filter can be used in ice makers, refrigerators, beverage equipment, drinking fountains, under the counter systems, R.O.Systems and in conjunction with purification systems. This filter also aids in the removal of taste, odor and chlorine taste and odor. Dimensions: 2″ W X 10″ LFlow Rate: .5 GPMMaximum Pressure: 125 PSIGMaximum Temperature: 100 FService Life: 1 Year or 1500 Gallons Filtration Media: Granulated Activated Carbon Volume Cubic Inch: 18.5Fitting Size: Quick-Connect 1/4″ fittings Omnipure K2533-JJ has been tested for performance under NSF Standard 42.

From the Manufacturer

The Omnipure K-Series K2533-JJ filter is a post R.O. acid washed GAC inline water filter. This filter has 1/4 quick connect fittings that make it really easy to install and replace. This filter can be used in ice makers, refrigerators, beverage equipment, drinking fountains, under the counter systems, R.O.Systems and in conjunction with purification systems. This filter also aids in the removal of taste, odor and chlorine taste and odor.Dimensions: 2″ W X 10″ LFlow Rate: .5 GPMMaximum Pressure: 125 PSIGMaximum Temperature: 100 FService Life: 1 Year or 1500 GallonsFiltration Media: Granulated Activated CarbonVolume Cubic Inch: 18.5Fitting Size: Quick-Connect 1/4″ fittingsOmnipure K2533-JJ has been tested for performance under NSF Standard 42.

If you need contaminant free filtered water someplace where there is a 3/8 inch water line, look no further than the HYDRONIX ICF-10Q38. It’s Quick Connect fittings make installation a snap. Why not filter the water to your coffee or espresso maker? How about feeding Chlorine free water to your humidifier? If it has a 3/8 inch water line, there’s no reason why you can’t have filtered water.

Conclusion

By our suggestions above, we hope that you can found coconut inline water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!