The 10 Best Atwood Hot Water Heater Ecm
Nowadays, there are so many products of atwood hot water heater ecm in the market and you are wondering to choose a best one. You have searched for atwood hot water heater ecm in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings atwood hot water heater ecm which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
RV Water Heater Thermal Cut Off Switch (1)
- Works for Atwood gas water heaters,and Thermal Cut Off 190 Degree Water Heater Parts
- This item is used with Electronic Water Heaters as a safety device in the event of a water heater flare up,a necessity for safe operation of your propane water heater for an RV.
- be sure your water water heater models,and it would Perfect Fit with all the parts you need.
- Easy to Install, but sometimes the included connectors would be a different size from the ones in my water heater,please Keep a spare on hand, It is a simple matter to crimp on new connectors
Designed for your mobile home water heater, this insulation kit provides a reliable fuse that keeps the water heater in top condition and effectively provides you with hot water.2 switches – Use the cut-off kit with two switches to make the water heater work properly. With this handy kit, spare parts are always available in your toolbox. Work on Electronic Water Heater Models: GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E , GC6AA-9E, GCH10A-2E, GCH10A-3E, GC10A-2E, GC10A-3E, G10-1E, GH10-1E, G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-2E, GH6-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E, XT Series
Atwood 91365 Circuit Board Kit for Water Heaters – Use with Gas/Electric 12 VDC
- NEWEST MODEL: Replaces Atwood 93851.
- COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E.
- COMBO BOARD: Controls BOTH the LP ignition and the Electric Element. Atwood part #93309 (edge pin connector) NOT included.
- TECHNICAL SUPPORT: Atwood provides prompt support in diagnosing and resolving technical problems.
The 91365 SVC Control Board Fuse Combo Kit replaces the Atwood 9385.It will work with Atwood Electronic Water Heater Models: GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E, XT Series.
NEW RV ATWOOD 6 GALLON GAS/ELECTRIC GC6AA-10E WATER HEATER DSI WITH WHITE DOOR
Having hot water has never been easier with the next generation of Combination Gas/Electric Water Heaters from Atwood Mobile Products. BRAND NEW Atwood Water GC6AA-10E DSI Gas and Electric Combo *In Stock – Same Day Shipping on Weekday Orders before 2pm EST Atwood water heaters have aluminum clad tanks. This eliminates the need to have the aluminum anode for corrosion protection. 95% of the parts can be replaced or serviced through the outside door. This simplifies service and eliminates the need for service personnel to enter the inside of your coach. The high temperature limit switch, temperature control and pressure relief helps protect your equipment and safety. 6 Gallon Capacity Part# 96160 Direct Spark Ignition Input 8,800 BTU or 1400 watt Recovery Rate of 11.6 Gal/Hr on LP / 6.2 Gal/Hr on Electric / 17.8 Gal/Hr on Combo 19 lbs Empty Weight Cut Out Dimensions: 16″ Wide x 12.5″ High x 16 7/8″ Deep COMES WITH WHITE DOOR !!
Camco 11553 Magnesium Anode Rod – Fits Atwood Heaters
Camco RV Magnesium Anode Rod extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion. This Anode Rod fits Atwood water heaters. Patented.
Atwood (91603 Jade Pilot Water Heater Assembly
Atwood Water Heater Replacement Parts – Jade Pilot Assembly, Standard 91603.
ECO Thermostat Assembly Replace for Atwood 91447 Replacement Part for Water Heater Repair Parts Fit For RV, Motor Home Emergency Cutoff Service Kit
- Water heater repair parts for RV, Motor, Home,etc.Easy installation, if follow our installation instructions
- Fits Models:GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E,GCH10A-3E, G10-1E, GH10-1E,G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10A, GC10A-4E, GCH10A-4E
- Please check the part number before purchase to ensure proper coordination
- Temperature Range (Deg F): 140 Degree Fahrenheit
Maintain the functionality of water heaters in your RV and save some cash on service repair fees，replace for Atwood 91447 RV Water Heater ECO Thermostat Assembly.this thermostat assembly serves as a replacement part for your damaged and worn-out thermostat. This accessory ensures proper functioning of water heater in your mobile home’s bathroom by controlling the flow of electricity into the heating elements – guaranteeing that you’ll always have calming hot water flowing from the shower. Built with an emergency cutoff designed to prevent an accident by ensuring water temperature does not rise above 60 C (That is 140 degrees Fahrenheit) is the thermostat and goes on the right side of the set. The other part is the ECO and it is shown 82 C (about 180 degrees Fahrenheit).
Turn switch to OFF position.
Discount brown and red wires from thermostat and ECO terminal connections on front of water heater.
Peel off black foam cover.
Remove washer, spring and thermostat from behind metal tabs on water heater combustion pan.
1.Place thermostat in the right cutou(as you face the water heater).
2.Replace spring and washer behind metal tabs on water heater combustion pan to hold thermostat against water heater tank.
3.Cover with black foam cover (provided with kit).
4.Reconnect brown wires to thermostat and red wires to ECO.
5.Turn unit on.
Atwood 91504 Universal Ignition Control
NEW ATWOOD RV WATER HEATER G6A-8E SIX 6 GALLON GAS WATER HEATER DSI WITH WHITE DOOR
- COMES WITH WHITE DOOR
- Direct Spark Ignition 6 Gallon Capacity
- Input 8,800 BTU
- Cut Out Dimensions: 16″ Wide x 12.5″ High x 16 7/8″ Deep
- This Atwood Water Heater Replaces these Atwood Models G6A, G6A1, G6A2, G6A3, G6A6, G6A7, G6A7P, GH6, G610, G6A2E, G6A3E, G6A4E, G6A6E, G6A6P, G6A7E, G6A8E
Atwood water heaters have aluminum clad tanks. This eliminates the need to have the aluminum anode for corrosion protection. 95% of the parts can be replaced or serviced through the outside door. This simplifies service and eliminates the need for service personnel to enter the inside of your coach. The high temperature limit switch, temperature control and pressure relief helps protect your equipment and safety. 6 Gallon Capacity Direct Spark Ignition Input 8,800 BTU Recovery Rate of 11.6 Gallons per Hour 19 lbs Empty Weight Cut Out Dimensions: 16″ Wide x 12.5″ High x 16 7/8″ Deep FAST AND FREE SHIPPING!! This Atwood Water Heater Replaces these Atwood Models G6A, G6A1, G6A2, G6A3, G6A6, G6A7, G6A7P, GH6, G610, G6A2E, G6A3E, G6A4E, G6A6E, G6A6P, G6A7E, G6A8E
ECOTOUCH Electric Tankless Water Heater Point-of-Use Hot Water Heater Digital Display for Energy Efficiency 5.5kW at 240V, White
- 【INSTANT & SUFFICIENT HOT WATER】Applied with 5.5KW heating system, the electric water heater supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those “lukewarm” toys.
- 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flow rate and temp setting in real time. For example, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 98% saves considerable electric charge.
- 【CONVENIENT USE】The tankless water heater comes with digital display & touch control panel so temp setting is easy job. Now turn on the tap and let the smart unit do the rest, you needn’t go through hard lesson about temp setting by a mixer tap without any hint. The Black model comes with Remote control, useful for installation under sink.
- 【SAFE and DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
- 【POINT of USE】The sleek tankless water heater is compact as an oatmeal box, making it possible to install anywhere close to outlet and avoid energy waste. It can be mounted horizontally, vertically, obliquely, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5kW@240V
- dimensions 11″ x 7.5″ x 2.35″
- pipes fittings :1/2″ NPT.
Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.
This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.
HEALTHY WATER QUALITY
Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.
MULTIPLY SAFETY PROTECTIONS
Over temperature protection
Dry heating protection
Water and electricity line separated
Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.
Min. water flow to activate the unit: 0.475GMP
Max tempt rise from 67°F to 120°F @ 1GPM
Max. Amperage: 23A
Recommended wire size: 12AWG
Required circuit breaker : 1x 2-Pole 30 AMP
1.The unit is mainly for sinks, not for shower purpose.
2.The tankless water heater should be installed professionally.
3.Please read instruction manual carefully prior to installation and use!
1X ECOTOUCH 5.5kW instant water heater
1X Instruction manual and warranty card
1X Installation accessories
1X Remote control(for Black model)
Water Heater, 110V 3000W Mini Electric Tankless Instant Hot Water Heater with LCD Display for Bathroom Kitchen Washing (US Plug)(Red)
- Instant Water Heater—This is a high efficient water heater, which can heat the water to 30-45 degrees in about 5 seconds.(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
- LCD Digital Temperature Display—This mini electric water heater built in temperature sensor, can transmits the temperature in real time, and displayed on the screen, make the water temperature is clear at a glance.
- Automatic Temperature Control System—This mini electric water heater can freely adjust water temperature by water flow, the water heater will be automatically energized when the water flow is more than 0.6 liters, and automatically turn off when the water flow is lower than 0.4 liters.
- Compact Size Design—This mini electric water heater adopts compact size design, that is easy to install and can meet your various needs such as used in some narrow and small space in kitchen, bath room.
- Matters Need Attention—The operating current of this water heater is 32A, please ensure that you have the circuit breaker which can be used at 32A current, otherwise please do not buy.
Material: Stainless Steel Shell
Color: Black, Golden, Red(optional)
Rated Frequency: 60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)
Installation wire diameter: 1.5-2.5mm² copper wire
Water pipe interface: G 1/2″ interface
Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector
1 x Manual
Why the water is not hot?
1.The working current of our water heater is 25A-32A, and it require at least 1.5 square millimeters of wire. Please make sure that your circuit breaker can handle the 30amp, or it will not heat water.
2.The temperature is controlled by the size of the water flow. The Water Heater will be automatically energized when the water flow is more than 0.6 liters, and automatically turn off when the water flow is lower than 0.4 liters.
3.The heating temperature is between 30 and 55 degrees. If the water flow is large, the temperature will be low, and if the water flow is small, the temperature will be high.
Similar items with 4 stars and above
By our suggestions above, we hope that you can found atwood hot water heater ecm for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best atwood hot water heater ecm: Top-Rated Brands & What to Buy