pinocollection 
Nowadays, there are so many products of anet a8 heating element in the market and you are wondering to choose a best one. You have searched for anet a8 heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings anet a8 heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
WINSINN Removable 12V 40W Heater Cartridge 620 Ceramic Hotend Works with Creality Ender 3 5 CR10 CR-10 CR10 Anet A8 3D Printer (Pack of 5Pcs)
►Removable design, easy to install:))
►Voltage: 12V
►Power: 40W
►Heating head size: 6 x 20mm
►Total length:1 Meter
►Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
—————————————————————————————————————
Package include:
►5 x 12V 40W ️Removable Ceramic Cartridge Heater
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
Ewigkeit 12V 40W Ceramic Cartridge Heater and 3950 100K NTC Thermistor with Female Pin Head for RepRap 3D Printer Heatbed or Hot End
- Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
- Voltage: 12v, Power: 40w,Diameter: 6mm
- Length: 20mm
- Temperature sensor 100KΩ accuracy of ± 1%
- Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
- Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration
BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 12V 50W Ceramic Cartridge Heater
Signstek 10 PCS Reprap 12V 40W 620 Ceramic Cartridge Heater for 3D Printer Prusa Mendel
Mercurry 12V 40W 620 Ceramic Cartridge Heater (2 PCS)
Ewigkeit 12V 40W Cartridge Heater 620 Ceramic and NTC Thermistor 100K 3950 for 3D Printer(Pack of 10pcs)
- Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
- Voltage: 12v, Power: 40w,Diameter: 6mm
- Length: 20mm
- Temperature sensor 100KΩ accuracy of ± 1%
- Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
- Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration
Sunhokey 12V 40W Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer(Pack of 12pcs)
- Cartridge Heater Material : 304 stainless steel ,the core is made of Nickel-chromium alloy.
- Parameters：12V 40W, 6*20MM(Lead length 1M)
- Thermistor :Temperature sensor 100KΩ accuracy of ± 1%
- Features：High sensitivity, rapid response,easy installation, wide temperature range, good stability, high reliability.
- Customer Service：If you receive any damaged or not working products, please contact us, you will be free to renew.
Product 1: Cartridge Heater
Material: stainless steel
Core: Nickel-chromium alloy
Resistance: 2080 high temperature resistant high-quality oxide powder
Voltage: 12V
Power: 40W
Diameter: 6mm
Length: 20mm
Wire Length: 1m
Product Usage: mold heating, hot core box, core shooting machine, and other media equipment heating
Product 2: Thermistor
High sensitivity, rapid response, compact structure, easy installation, wide temperature range, good stability, high reliability, Can provide different R, B value products, strong interchangeability, and high precision.
The main technical parameters of the product:
Nominal resistance: R25 (25 ° C): (commonly used) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
Resistance accuracy: ±1%, ±2%, ±3%
B value R25/50: (common) 3435K, 3600K, 3950K, 3990K, 4100K, 4200K, etc.
B value accuracy: ±1%
Operating temperature range: -40 ° C ~ +300 ° C
Dissipated power factor: ≥5 mW/°C (in static air)
Maximum rated power: 45mW
Thermal time constant: ≤ 7S (in static air)
Temperature coefficient of resistance: -2~ -5% / °C
Recommended parameters: R25°C=100K B25/50=3950K±1%
Package Included:
12V 40W Cartridge Heater X 6
3950 Thermistor X 6
Conclusion
By our suggestions above, we hope that you can found anet a8 heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
