Which Is The Best Heating Circulator Pumps

Product Details
Model: RS15-9
Rated Power:120W 
Outlet: NPT 3/4 inch 
Max Flow: 30L/min（8GPM）
Rated Head: 9m（25.9Ft）
Volt/Freq: 110-120V/60Hz

Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on

Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control

Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2)The threads for this pump is NPT 3/4 inch,we suggest you’d better wrap some tapes around it.in case of leaking.
3) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar.
4) Ambient temperature: not higher than 40
5) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
6) Motor: Protection class IP44 Insulation class F
7) Material: Stainless Steel, PP, ceramics
8) Mounting position: Shaft horizontal mounting.
9) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 160 mm.

Product Description

Bell & Gossett Redfox Single Phase Circulating Pump. Cast iron Wet rotor Maximum working pressure: 150 PSI Maximum operating temperature: 240 F Moves 15 GPM at 5 feet, 7.5 GPM at 10 feet Companion flange sizes: 3/4″ – 1-1/2″ sold separately Single Phase Circulating Pump. B&G 1/25HP CI 3 SPEED PUMP 115V. Replacement Part.

From the Manufacturer

Bell & Gossett Redfox Single Phase Circulating Pump. Cast iron Wet rotor Maximum working pressure: 150 PSI Maximum operating temperature: 240 F Moves 15 GPM at 5 feet, 7.5 GPM at 10 feet Companion flange sizes: 3/4″ – 1-1/2″ sold separately Single Phase Circulating Pump. B&G 1/25HP CI 3 SPEED PUMP 115V. Replacement Part.

Product Description

The Taco 0011 is specifically designed for high head / medium flow applications in large residential or light commercial closed loop hydronic heating and chilled water cooling systems. Ideal for high pressure drop boilers, fan coil units, heat exchangers, large radiant heating and heat recovery/geothermal systems. The 0011 should be used on open loop systems. The unique replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. Universal flange to flange dimensions and orientation allows the 0011 to easily replace other models. Compact, low power consumption design makes it ideal for high-efficiency jobs. Features: exclusive ACB anti-condensate baffle with ambient air flow – protects motor windings against condensate buildup, high velocity performance – compact design, quiet and efficient operation, direct drive – low power consumption, unique replaceable cartridge design – field serviceable, self lubricating, no mechanical seal, unmatched reliability, maintenance free, universal flange to flange dimensions, and cast iron construction. Motor Type: Permanent Split Capacitor Impedance Protected. Maximum Flow: 21 GPM. Maximum Head: 31′. Minimum Fluid Temperature: 40°F (4°C). Maximum Fluid Temperature: 230°F (110°C). Maximum Working Pressure: 150 PSI. Connection Sizes: 3/4″, 1″, 1-1/4″, and 1-1/2″ Flanged. Dimensions: 7-1/2″ x 6-1/8″ x 3-1/2″ x 3-3/8″ x 5-5/8″ x 6-1/2″.

From the Manufacturer

The Taco High Velocity Series 0011 Cartridge Circulator is specifically designed for high-head/medium-flow applications in large residential/light commercial closed-loop hydronic heating and chilled water cooling systems.

Specifications:
Rated Power:93/67/46W
Inlet/Outlet:3/4 inch
Max Flow:36/29/20 L/min
Rated Head:20/16/13m
Volt/Freq:110-120V/60Hz

Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.

Advantages:
No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.

Features:
High temperature resistance, antifraying,long life, maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.

Performance Datas:
1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range -50 – +230?Maximum working pressure 10bar.
3).Ambient temperature: not higher than 40.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Stainless steel,PP,ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm.

Product Description

Bronze Circulator Pump 3/4-Inch Sweat

From the Manufacturer

The TACO 006 is designed for circulating hot or chilled fresh water in open or closed loop applications. Typical uses include hydronic heating, domestic hot water recirculation, hydro-air heating/cooling, heat recovery units, water source heat pumps, drain down open loop solar systems and potable water applications. The unique, replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. The compact, low power consumption design is ideal for high efficiency jobs.

Product Description

The Taco 009 is designed for a wide range of residential and light commercial higher-head/lower-flow water circulating applications. Typical uses include hydronic heating, radiant in-floor/panel heating, and closed-loop solar heating systems. The Stainless Steel 009 can be used in higher-head/lower-flow heat recovery, open-loop solar heating, and light commercial domestic water recirculation systems. The unique replaceable cartridge contains all of the moving parts and allows for easy service, instead of replacing the entire circulator. Compact, direct-drive, low power consumption design is ideal for high-efficiency jobs. Max. Flow: 10 GPM Max. Range: 35 Feet Min. Fluid Temperature: 40 ̊F (4 ̊C) Max. Fluid Temperature: 230°F (110 ̊C) Max. Working Pressure: 150 psi Connection Sizes: 3/4″, 1″, 1-1/4″, 1-1/2″ Flanged; Volts: 115, Hz: 60, Amps: 1.40, RPM:3250, HP 1/8.

From the Manufacturer

Taco 00 Series Single Phase Circulating Pump. Taco 00″ cartridge circulator is designed to make your job easier. Installation is quick and easy, and maintenance is a snap. With no mechanical seal, the self-lubricating design provides unmatched reliability. Every 00″ features a field-replaceable cartridge that contains all the moving parts. Less flanges 115 Volt, 60 Hz, 3250 RPM Standard high capacity output Direct drive, low power consumption Universal flange to flange dimension Model Nomenclature F – Cast Iron, Flanged Z – Zoning Circulator BC – Bronze, Sweat, Panel Mount IFC – Integral Flow Check Single Phase Circulating Pump. TACO 1/8HP 115V CI PUMP L/FLANGES. Replacement Part. Home Repair, Repair Parts, Fix Plumbing.

Conclusion

By our suggestions above, we hope that you can found heating circulator pumps for you.Please don’t forget to share your experience by comment in this post. Thank you!