pinocollection 
Nowadays, there are so many products of double sided 3m adhesive pads in the market and you are wondering to choose a best one. You have searched for double sided 3m adhesive pads in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings double sided 3m adhesive pads which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
46,159 Reviews Scanned
3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes
- ➣Strong Stickness: Original 3M VHB stick adhesive pads,Double sided self sticky,1.55mm thickness black VHB adhesive pads,stronger than most adhesive pads.
- ➣Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace.
- ➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount.
- ➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace.
- ➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem.
NOTE:
1,Please don’t stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M VHB adhesive pad is one-time use.please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using.The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film.If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.
Easy installation：
Step 1,Remove the residual glue.
Step 2,Clean&dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base,then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film,Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
Package include:
4 X 3M VHB adhesive pads
1 X use manual
8 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, VOLPORT VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs Double Sided Tape for Collapsible Grip & Stand
- Cell Phone Holder Adhesive: 8 PACK Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard
- Strong 3M Sticky Adhesives: 2 PACK more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount
- Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again
- Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24 HOURS to use after stuck
- What You Get: Volport 8 PACK small 3m phone sticky adhesive gel, 2 PACK large 3m adhesive disc, and 2 pack alcohol pads. Our worry-free 18-month warranty and friendly customer service. NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price
Very High Bond Double Sided Adhesive Mounting Pad,Square Conformable Glue Replacement Very Thin Foam Mounting Pad 1.1 inch Square Pad Remove with No Residue 30 Pieces Square
- Very high bond double sided mounting pad:better than normal 3m adhesive tape, can be used to bond many kinds of material with flat hard surface.
- Can be removed with no residue:you can remove it with no residue if you don’t need it,don’t worry that it will affect the original appearance of the object you bond.
- Very thin:the thickness is only 0.4mm,almost no increase in thickness for what you need to bond.
- Size and shape:about 1.1 inches adhesive square.
- Easy to use and pack of 30.Make sure the surface of the object is smooth and clean before using it to ensure that the adhesive is stronger.
Using Tips:
Make sure the the surface of both parts you want to glue together is flat and clean.
Peel the film from one side and apply to the chosen spot. Wait for about 30 min,peel other side and apply to the other chosen spot,wait for 2 – 4 hours before use.
Package Quantity:30 x Double Sided Foam Pad Strong Adhesive
10 Pack 3M VHB Strong Sticky Adhesive Replacement Kit Parts for Socket Mount,Colorwe 1.38 Inch Circle Double Sided Tape for Phone Case and Collapsible Grips Socket Base,6pcs Alcohol Prep Pads
- 【Socket base adhesive sticky replacement pad】10 pack of Strong 3M VHB adhesive pad is perfect for replacing the socket base adhesive pad. Use the Colorwe spare adhesive pad to reconnect the phone case and the socket, saving the trouble of purchasing
- 【Genuine adhesive pad】Adopts 3M VHB original authentic material, which is stronger than ordinary adhesive pad and more resistant to high temperature. Use Circle Double Sided Tape adhesive replacement pad to firmly connect the socket with the phone case.
- 【Use of Alcohol Prep Pads】The Alcohol wipe provided is used to clean the contact surface of 3M adhesive before installation. Please ensure that the contact surface of the adhesive is thoroughly cleaned and dried before applying new adhesive.
- 【Important Notes】Easy to install, use a thin wire to peel off the old adhesive, then thoroughly clean and dry with an alcohol wipe. Use a new adhesive stick to the socket base and press it down repeatedly to make the adhesive surface fully contact. 24 Hours to use after installation for best results. Adhesive does not adapt to soft silicone phone case.
- 【What can you get】10 Packs of 35mm replacement adhesive ask to buy!nd 6 packs of alcohol preparation pads. 30-day unconditional money back guarantee and 18 months worry-free warranty guarantee, friendly customer service. No risk to buy!
This set of replacement accessories pack
Is exclusively designed for socket sticker adhesive
- When you find your socket is falling off,what would you
Do,buy another new one？
- No! you don’t need to. Colorwe 3M Sticky Adhesive
Can solve your problem, you should try!
- Our sticky Adhesive is 40% stronger than ordinary primer,high
Temperature and low temperature resistance, and will not fall off easily.
- 1.38 inch(35mm) stickey adhesive fit perfect socket base&back.
- Best socket cover replacement parts ever.
3M Double Sided Black Foam Tape Mounting Pad Adhesive (50)
- Size: Square double sided foam tape measures 1.58in*1.58in.Thickness:2mm
- Suitable for bonding many kinds of material with flat hard surface such as wood, metals, glass, papers, paints, and many plastics.Please note that this is not suitable for fragile objects such as mirror.
- Make sure the surface of the object is smooth and clean before using it to ensure that the adhesive is stronger.
- Highly bond conformable acrylic foam tape has adhesive both sides to promote excellent adhesion to a broad range of surfaces.
- Package includes 50 pieces strong adhesive pad,and we offer two different shape-square and round,you can choose according to your need.
Using Tips:
Make sure the the surface of both parts you want to glue together is flat and clean.
Peel the film from one side and apply to the chosen spot. Wait for about 30 min,peel other side and apply to the other chosen spot,wait for 2 – 4 hours before use.
Package Quantity:50 x 3M Double Sided Black Foam Tape Strong Pad Mounting Adhesive
100 PCS Adhesive Replacement Kit Double-Sided Foam Tape High Bond Dots Conformable Acrylic Glue Strong Pad Mounting Tape Adhesion for Wall Surface Balloon Leather Rubber Mirror Face, White
- SIZE: Round(0.98*0.98 inch/2*2cm), Rectangle(0.98*1.37inch/2*3cm) thickness: ≥0.1inch/0.25cm.
- EASY TO USE: Double-sided tape. Suitable for the surface, which no ripple uniform thickness and smooth, such as wood, metals, glass, papers, paints, and many plastics and fabrics.
- APPLICATION: Usually used for case, LCD, LED, pop socket, expanding phone, stand, balloon, mirror, litchi leather, ash falling wall, rubber, recorder. painting, grip / for wall hooks.
- HIGH-QUALITY: Good durability, temperature withstanding, strong adhesive, waterproof.
- DOUBLE SIDED tape strong pad mounting adhesive.
How to use:
Make sure the surface of both parts you want to glue together is flat.
Make sure the temperature during application is at least room or a little higher (70F – 90F).
Peel the film from one side and apply to the chosen spot. Wait for about 30 min.
Peel other side and apply to the other chosen spot. Wait for 2 – 4 hours before use.
Package
50pcs round tape
50pcs rectangle tape
Similar items with 4 stars and above
MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS
- What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.
- Strong Adhesive Pads Compatible with xiaoyi camera ,Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder , Windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.Replacement Adhesive Kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc.
- CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
- Strong Adhesive and not leave a residue：Strong adhesive is strong yet leaves no residue when removal is required.
- These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.
Package include:4 pieces Double Side Sticker Pad.
Double Side Sticker for Suction Cups for Car Bracket Mount Holder /GPS/Camera/Wall hook/and more
Similar items with 4 stars and above
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy double sided 3m adhesive pads, eg:
- What are Top 10 double sided 3m adhesive pads for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 double sided 3m adhesive pads to buy?
- What are Top Rated double sided 3m adhesive pads to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) double sided 3m adhesive pads?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for double sided 3m adhesive pads.
- Before deciding to buy any double sided 3m adhesive pads, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose double sided 3m adhesive pads and What you should consider when buying the double sided 3m adhesive pads and Where to Buy or Purchase the double sided 3m adhesive pads. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 double sided 3m adhesive pads of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about double sided 3m adhesive pads.
Conclusion
By our suggestions above, we hope that you can found double sided 3m adhesive pads for you.Please don’t forget to share your experience by comment in this post. Thank you!
