pinocollection 
Nowadays, there are so many products of refrigerator to wall water and ice maker hose in the market and you are wondering to choose a best one. You have searched for refrigerator to wall water and ice maker hose in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator to wall water and ice maker hose which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
Product Description
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft
- Braided stainless Steel ice maker connector
- 1/4 inch fem. x 1/4 inch fcm
- Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
- 15Ft
- Braided stainless steel
- 1/4 -Inch Comp x 1/4-Inch Comp
- 5 year warranty- From the Manufacturer
Product Description
Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.
From the Manufacturer
Ice Maker Connectors (15-Foot)
Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
Bottle Water Dispenser Pump System, 20ft 110V AC US Plug Water Dispensing Pump with Single Inlet Compatible Use with Coffee/Tea Machines, Water Dispensers, Refrigerators, Ice Makers
- BOTTLE WATER PUMP SYSTEM: This 110v water dispenser pump works with a commercial 5 gallon jug of water. It can deliver water under pressure to an individual drinking water faucet, offer hot or chilled water anytime. Perfect for water inlet of a refrigerator, coffee & Tea machine and anywhere else on-demand water supply is needed.
- SAFETY TO USE: When the bottle is empty, the pump system will shut off. With Illuminated on/off switch, provides clear visibility in dark or hard-to-reach places. This dispensing pump system with 40 PSI (2. 8 bar) maximum pressure, no worrying about water pressure problems.
- LESS NOISE: The pump equipped with noise dampening rubber feet to minimize noise pollution, recommend using 4 screws and securing it to a wall to make it even more quiet and cuts down on vibration.
- EASY TO INSTALL: The bottled water system comes with easy to read instructions that will make the install a breeze.
- LIFETIME WARRANTY: We stand behind our products and want to ensure that you love them just as much as we do. You’ll be glad you got these – guaranteed! Contact us if any problems caused, we will help you solve the problems ASAP!
Updated New Bottled Water Pump System with Universal Wall Transformer, US Plug Water Dispensing Pump Compatible Use with Coffee/Tea Machines, Water Dispensers, Refrigerators, Ice Makers
- UPDATED NEW PUMP: The bottle water pump system equipped with a universal wall transformer, no worrying about the voltage problems.
- DIVERSE USE: This bottle water pump system works with a commercial 5 gallon jug of water. It can deliver water under pressure to an individual drinking water faucet, offer hot or chilled water anytime. Perfect for water inlet of a refrigerator, coffee & Tea machine and anywhere else on-demand water supply is needed.
- MORE SAFETY: Equipped with an automatic thermal cut-off device for additional protection, when the bottle is empty, the pump system will shut off. With Illuminated on/off switch, provides clear visibility in dark or hard-to-reach places.
- LESS NOISE: The pump equipped with noise dampening rubber feet to minimize noise pollution, recommend using 4 screws and securing it to a wall to make it even more quiet and cuts down on vibration.
- LIFETIME WARRANTY: We stand behind our products and want to ensure that you love them just as much as we do. You’ll be glad you got these – guaranteed! Contact us if any problems caused, we will help you solve the problems ASAP!
Updated New Bottle Water Dispenser pump System with Transformer for water inlet of a refrigerator, coffee & Tea machine and anywhere else on-demand water supply is needed.
How it works:
The bottle water dispensing system was designed to pump water from a commercially available 5-gallon water bottle.
The heart of the system is the pump module that automatically adjusts the flow and pressure to fill an appliance or faucet, and stops automatically.
The wand has a built in back-flow preventor value that prevents water in the system from flowing back into the bottle, or spilling while changing bottles.
Wen the suction wand is inserted into the 5-gallon bottle, it will activate the float switch on the end of the wand and turn on the pump.This same float switch shuts off the system when the bottle is empty.
The system will deliver the water under pressure to an individual drinking water faucet, the water inlet of a refrigerator to the icemaker and chilled drinking water tap, and to certain commercial coffee/tee brewers.
INVERNTORY OF SYSTEM COMPONENTS
A.Universal wall transformer.
B.Suction wand and hose assembly.
C.20 ft (6.1m) of 1/4 in. (6.35mm) discharge tube.
D.Pump module with On/Off rocker switch, 3.5 ft. (1m) Cord.
E. Kit fitting: hose port/connector, compression nut and sleeve.
Whirlpool IceMaker Kit ECKMFEZ2 EZ Connect
Add an ice maker to selected models with ease. It takes less than 5 minutes to install the EZ Connect ice maker inside selected refrigerators.
Sunpentown IM-150US Stainless Steel Undercounter Ice Maker with Freezer
Under counter Ice Maker in sleek black and stainless steel door. This unit makes up to 12 -Pounds of crescent-shaped ice per day. Compact size to fit easily under most counters and front-ventilation feature allows a true built-in application. Removable bin holds up to 6 -Pounds of ice. No drain required, but installation by a licensed plumber is required.
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Stop Tee For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked High Density Polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go.
- COPPER STOP TEE allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4″ x 3/8″ x 3/8″ and is ready to connect to existing supply stops.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Stop tee measures 1/4″ x 3/8” x 3/8”. Limited lifetime warranty. Choice Hose and Tubing part number 509 5164K.
Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation
Ice Maker And Humidifier Installation Kit by Choice Hose And Tubing | Poly Tubing, Includes Everything Necessary For Complete Installation
- EASILY CONNECT TO YOUR REFRIGERATOR OR FREEZER. Attach to your fridge / freezer and enjoy a cup of delicious, crisp water with crystal clear ice cubes in no time! Great for both on-the-door ice/water dispensers and in-freezer ice cube machines. Poly tubing is lead-free and completely safe for potable water, and will leave your water tasting as fresh and pure as before.
- SET UP YOUR HUMIDIFIER/EVAPORATIVE COOLER IN NO TIME! Quickly and easily attach to your boiler or furnace, then sit back and enjoy the results. Poly tubing is durable and reliable
- connect your humidifier now and enjoy it for years to come.
- POLY TUBING is durable, reliable, and will leave your water tasting as fresh and pure as before. Set includes ¼” X 25’ poly tubing- enough to comfortably accommodate any ice maker/ humidifier/ evaporative cooler installation.
- COMPLETE INSTALLATION KIT includes poly tubing, self-piercing saddle valve, and fittings This universal, all-inclusive kit is designed with metal fittings to ensure a solid and dependable connection. Included instructions make DIY installation a breeze!
- NO NEED TO TURN OFF WATER. Easily complete installation without the hassle of shutting off your water supply while you work. EASY DO-IT-YOURSELF INSTALLATION. Includes step-by-step instructions. Limited lifetime warranty. Manufacturer part number 509 5100R. Make it yours today!
Get your appliances set up quickly and easily with this ice maker/ humidifier/ evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation! Limited lifetime warranty. Make it yours today!
SharkBite 25024 Plumbing Installation Kit
- Lead free dzr Brass construction for Durability and reliability
- For use with Copper or cpvc pipe
- Innovative push-to-connect design makes for quick and easy installation
- Corrosion resistant to improve longevity
- Listed by iapmo and design certified and listed to asse 1061/NSF 61
The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
Conclusion
By our suggestions above, we hope that you can found refrigerator to wall water and ice maker hose for you.Please don’t forget to share your experience by comment in this post. Thank you!
