pinocollection 
Nowadays, there are so many products of reptile heating filament in the market and you are wondering to choose a best one. You have searched for reptile heating filament in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings reptile heating filament which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Zilla Reptile Terrarium Heat Lamps Mini Halogen Bulb
- 50 Watt Mini Halogen Bulb is equavalent to 100 to 150 watt incandescent bulbs
- Up to 250% more efficient than incandescent
- Thicker glass and stronger filament bulbs yield over 1,000 hours on average, double versus incandescent
- Provides healthy light and essential warmth for your reptile
- Fits with Zilla fixtures: Halogen Mini Dome, Heat & UVB Basking, Mini Heat & UVB and more!
Zilla Mini Halogen lamp White 50 Watt for Zilla Mini Dome halogen fixture. The Mini Dome fixture takes up less space on terrarium tops and accurately pin-points light and heat.
Zilla 4 Pack Incandescent Bulb, Night Red Heat, 50 Watt
- 4 individually packed 50 watt Night Red Heat bulbs
- These bulbs are recommended for use with Zilla Reflector Domes
- Night Red Heat provides consistent ambient heat that warms your reptile’s habitat
- This bulb allows for viewing your pet’s nocturnal habits and shy species activities under a visible that red glow does not disrupt creature’s nocturnal habits or sleep patterns
- Zilla Incandescent Reptile Bulbs feature heavy duty filaments that yield more hours of service from every bulb than the average filaments
Zilla Incandescent Bulbs feature heavy-duty filaments that yield more hours of service from every bulb than the average filaments. Choose from a full selection to meet specific pet care needs. Night Red Heat provides consistent ambient heat that warms the habitat. Visible red glow does not disrupt creature’s nocturnal habits or sleep patterns and allows for viewing nocturnal habits and shy species activities. Heavy duty filaments yield hours of performance. Recommended for use with Zilla Reflector Domes.
12-Pack G60 11W Vertical Filament Bulb,Clear Glass Amber Warm White Decorative Antique Vintage Edison Incandescent Bulbs for E26 Sockets,Waterproof Replacement Medium Base Globe Bulbs for Any Occasion
- Save Energy: average 3,000-hour bulb life (up to 2.7 years, based on 3 hours of use per day), $1.32 estimated yearly energy cost per bulb
- Design: For Damp or Dry locations, Crystal Clear Glass, Extra Thick Vertical Filament and High-Quality Nickel Plated E26 Base. No noise, No glare, Dustproof Vacuum Structure, Shatter Resistant and Corrosion Resistant
- Color Balance: 100Ra Color Rendering Index is more vivid and natural lighting for the best eye protection, 2700K Color Temperature provides a soft warm yellow mood light to create a relaxing and comfortable environment
- Bulb Effect: No dimmable. Just for decoration. Not recommended to use for reading or other lighting purposes
- Decorative Touch: Great for String Lights, Vanity lights, Pendant lights or any fixture where the bulb is visible, parties, weddings, patios, kitchens, living rooms, dining rooms, offices, family rooms, bedrooms Christmas and other Gatherings
Zilla Incandescent Heat Bulb
- Provides ambient heat that creates a healthy environment for reptiles
- Does not emit visual light which can be disruptive to the creature or room
- Gentle glow produces little visual light allows for viewing nocturnal habits and shy species activites
- Heavy-duty filaments yield hours of performance
- Recommended for use with Zilla Reflector Domes
Ideal for tropical and desert habitats, the bulb provides ambient heat in which the photons emitted by the filament never escape the dark tint, heating the air inside the enclosure to create the warmth needed for a healthy reptile environment. The bulb is made from glass containing rare earth black phosphors, which simulates the moon’s natural glow for nocturnal viewing without disturbing the reptile’s day/night cycle.
Similar items with 4 stars and above
Zilla 4 Pack of Incandescent Heat Bulbs, 75 Watts, Night Red Heat, for Reptile Terrariums
- 2 75-watt Night Red Heat incandescent bulbs
- Heavy-duty filaments yield hours of performance
- Provides consistent ambient heat that warms your reptile’s habitat
- Allows for viewing your pet’s nocturnal habits and shy species activities
- Visible red glow does not disrupt reptiles’ nocturnal habits or sleep patterns
Zilla Incandescent Bulbs feature heavy-duty filaments that yield more hours of service from every bulb than the average filaments. Choose from a full selection to meet specific pet care needs. Visible red glow does not disrupt creature’s nocturnal habits or sleep patterns.
Zoo Med Laboratories SZMRH20 40-Watt Repti Therm Habitat Heater
- Moisture proof
- Easy to use, clean
- 1-year limited warranty
- Zoo Med Laboratories Repti Therm Habitat Heater
- Industrial Strength Heater for Heavy Tortoises and other Large Reptile Cage Applications
- Automatic thermostat protection shuts-off heater at 119-DegreeF (48-DegreeC) to prevent over heating
- industrial Strength Heater for Heavy Tortoises and other Large Reptile Cage Applications
- Automatic thermostat protection shuts-off heater at 119°F (48°C) to prevent overheating
Zoo Med’s new ReptiTherm Habitat Heater is designed for use with large, heavy reptiles such as tortoises, or in large “zoo” style enclosures with Monitors, Tegus, Iguanas, and other large lizards.
Zacro Reptile Heat Lamp 100W with One Digital Thermometer, Infrared Ceramic Heating Non-light Lamps Emitter 110V (Black)
- Perfect 24 hour heat source for all types of reptiles, amphibians, birds, hamsters, and one digital thermometer included
- 99% high thermal efficiency, the non-light heater lamp will not disturb animals sleep pattern
- Solid ceramics element has a good heat radiation feature(also works in sealed box), which can works
- Flat-faced design is more efficient and longer lasting than conical design which will build up excess
- ATTENTION!: Match the ceramic E27 socket only because the plastic E27 socket may melt the lamp holder even cause the lamp explosion
Zilla Incandescent Spot Heat Bulb
- Provides more focused and light and heat
- Simulates the daytime sun that is ideal for basking
- Pinpointed light and heat allows reptiles to regulate their body temperature
- Heavy-duty filaments yield hours of performance
- Recommended for use with Zilla Reflector Domes
- Ideal for tropical and desert habitats
The bulb simulates the natural photo-environment of a desert or tropical habitat while generating a heat source needed for a healthy reptile environment. Photons from the daylight spot bulb provides a focused beam of heat and light that pass through the glass heating the opposing surface, creating a direct basking spot for reptile. The bulb is made from glass containing rare earth neodymium phosphors produce a brighter, whiter light. This full-spectrum lamp emits energy across all visible wavelengths from 400nm to 700nm and UVA rays from 315nm to 400nm.
Zi-Rui 3D Printer PLA Filament, Tri Color Changing with Temperature, Pine Green to Light Orange to Yellow,1.75mm (+/- 0.03mm),2.2LBS(1KG)
- TEMPERATURE COLOR CHANGE: Under 31ºC it looks black and above that it starts getting red, and when the temperature is above 45ºC, it starts getting yellow. Please note that this type of filaments should avoid long-time direct sunlight exposure. The longer the exposure time, the faster the color fade.
- DIMENSIONAL ACCURACY: 1.75mm filament, diameter variance of no more than 30 microns for consistent feeding and better 3D prints.
- SMOOTHLY PRINT: Zi-Rui engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping.
- HIGH PERFORMANCE: Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Zi-Rui PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
- HIGH COMPATIBILITY: Perfectly compatible with most of the FDM 3D Printer, Can print the best works for you.
Try Zi-Rui Tri Color Changing with Temperature 3D Printing PLA Filament, which gives your printing object a very smooth gradient effect between colors!!
Material: PLA(Polylactic Acid)
Color: Tri Color Changing with Temperature
N.W: 1KG(2.2lbs)
Diameter: 1.75mm(Dimensional Accuracy +/- 0.03mm)
Print Temperature: 190-220 °C
Hot bed Temperature: 0-50°C
Bubble: no-bubble
Box size: 21.5*20.5*7cm(8.4*8*2.7 inches)
Speed: 50-90mm/s
High Quality & High Compatibility
Strict production standard to guarantee high accuracy. Eco-friendly with high performance, no bubble, no jamming, no drawing.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm.
Tri Color Changing with Temperature PLA filament make your 3d printing model perfect, Gorgeous surface, nature and unique textures ects.
Coupled with premium raw material, transcend industry standard accuracy and strict control, let you enjoy the fun of smooth printing with Zi-Rui Tri Color Changing with Temperature PLA filament.
Tips:
1. It’s better try to release the filament to its original status after print, and place remitting filament back to original vacuum bag and stock them in a cool and dry place after print. Filament can absorb moisture from air and affect its quality and performance.
2. Pls do not start the cooling fan at first 3 layers of model. Set the layer 0.1mm will be the best surface smooth and shiny. Set the outer layer in a slowly speed , 50-90mm/s
3. Clean or change the nozzle before printing is good way to reduce jam if it was used for many times.
AIO Robotics AIOTEMPGREENTOYELLOW PLA 3D Printer Filament, Color Change by Temperature, Dimensional Accuracy +/- 0.02 mm, 0.5 kg Spool, 1.75 mm, Yellow/Green
- 0.5 kg (approximately 1.10 lbs.) spool
- 1.75mm filament diameter (Dimensional accuracy +/- 0.02mm)
- PLA (Polylactic acid) 3D printer filament Vacuumed sealed with desiccant, resealable bag
- Recommended extrusion/nozzle temperature 190°c – 230°c (374°f – 446°f)
- Spool diameter: 8″ – spool width: 2″ – spool hub Hole diameter: 2″
The AIO Robotics PLA filaments are universally designed and compatible with 3D printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.02mm. PLA, or Polylactic acid, is one of the most popular thermoplastic 3D printing materials. AIO Robotics PLA filament is plant-based and eco-friendly. Highest quality, astonishing surface finish, less warping, easy to use, no heated bed required.
Conclusion
By our suggestions above, we hope that you can found reptile heating filament for you.Please don’t forget to share your experience by comment in this post. Thank you!
