pinocollection 
Nowadays, there are so many products of gtx 980 ti liquid cooling in the market and you are wondering to choose a best one. You have searched for gtx 980 ti liquid cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings gtx 980 ti liquid cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3000MHz C15 Desktop Memory Kit – Black (CMK16GX4M2B3000C15)
ASUS Cerberus GeForce GTX 1050 Ti 4GB OC Edition GDDR5 Gaming Graphics Card (Cerberus-GTX1050Ti-O4G)
- Esports Gaming tested with major titles like League of Legends, Over watch and Player Unknown’s Battlegrounds
- Strong back plate support designed to reinforce circuit board
- Plug and play design requires no PCIe power connectors for easy graphics upgrade
- Auto-extreme Manufacturing Technology delivers premium quality and reliability with aerospace-grade Super Alloy Power II components to run faster and last longer than reference
- GPU Tweak II makes monitoring performance and streaming easier than ever, featuring Game Booster and XSplit Game caster, all via an intuitive interface
Play longer and cooler than the reference to the ASUS Cerberus GTX 1050 Ti 4GB OC edition, powered by NVIDIA. GPU Tweak II enables one-click overclocking to optimize graphics performance while Auto-extreme Technology uses full machine SMT automation with aerospace-grade Super Alloy Power II components for premium quality and reliability.
Similar items with 4 stars and above
EKWB EK-FC1080 GTX Ti FTW3 RGB GPU Waterblock, Nickel
EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.
Model: 3830046996466
anidees Graphic Card Cooler 3 x80mm PWM Fan, Support ASUS Aura SYNC/MSI Mystic Sync/ASROCK Aura RGB/GIGABYTE RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL
- Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans
- Sturdy Metal with aluminum brush with PCI mount design for easy installation
- 80mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
- Easy to use: the fan allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
- PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow.
- RF wireless control: allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.
Specifications:
Part No : AI-GP-CL
LED Color : RGB
Dimension:11.22 x 3.7 x 1.02 inches
Fan Dimension : 80 x 80 x 20 mm
Weigh : 1 lb
Max Air Flow : 11.14 CFM
Max Air Pressure: 0.49 mm-H2O
Fan Speed: 1600 rpm ± 10% RPM
Noisy Leve : 19.3 dBA
Bearing : Rifle Bearing
Connector : 5 PIN
Voltage :12 V
Start Voltage : 8.5V
Power consumption : 3.12W
Buy with confidence: 12 Months Warranty, 24 hours friendly customer service available at all time.
EKWB EK-Thermosphere GPU Water Block (Copper Acetal)
- Perfect for any graphics card that doesn’t have a full cover water block available for it
- Compatibility: Nvidia GeForce, AMD Radeon
- EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance
- Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminals
- Base: Copper | Top: Acetal
The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)
Frostflow Cooling Fan 120VGA GeForce GTX 4pin GPU Radiator Water Cooler
- The cold head is designed with multi-platform fastener and supports 58.4×58.4mm and 53.3×53.3mm.
- GeForce GTX Series graphics cards with two main hole spacing designs (recommended for GTX960/980/980Ti/1050/1060/1070/1070Ti, AMD R390/290/280 series or other graphics cards of corresponding level), please make sure that your graphics cards support the disassembly of the original radiator before purchase.
- The right side of the cold head is equipped with an air-cooled auxiliary heat dissipation unit and attached with pasted heat dissipation particles, which can ensure that the display and power supply sections are fully cooled.
- Powerful water pump with ceramic bearing is equipped with pure copper cold head of micro-channel, which can take away GPU heat more quickly.
- The encrypted 120 aluminium thin row is selected for both heat dissipation efficiency and good compatibility.
Specifications:
Fan specifications:
Fan speed: 700-1500RPM
Air volume: 62CFM
Noise: 18.0-26.4dB (A)
Connector: 4Pin (2510)
Start-up voltage: DC 7V
Rated voltage: DC 12V
Rated current: 0.18A
Rated power: 2.16W
Size: 120X120X25mm/4.72X4.72X0.98″
Pump specifications:
Pump speed: 2000 RPM
Pump head: 1.2m H2O
Cold liquid flow rate: 96L/H
Noise: 25.0dB (A)
Connector: SATA
Rated voltage: DC 12V
Rated current: 0.25A
Rated power: 3W
Cold Head Size: 65×32.5mm/2.56×1.28″
Cold Plate size: 154x120x27mm/6.06×4.72×1.06″
Pipe length: 315mm/12.4″
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
Package included:
1 X GPU Cooling Fan
1 X Installation Kit
1 X User Manual
Wathai Pcl Slot Fan 92mm x 25mm 9225 90mm Brushless Cooling Fan for VGA Graphic Card cooler
- Package include: 1 Piece Graphic Card Fans with 1*Power D-type Interface cable
- Rated Voltage:12V 0.2 A
- Speed: 3000RPM
- Air flow: 86.3CFM
- Noise:37dBA
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- D-type interface cable included four interfaces, three voltages: 5V 7V and 12V
- Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan.
- Dimension: 92mm(L) x 92mm(W) x 25mm(H) / 3.62×3.62×0.98 in. per fan
- Totally Size: 185mm(L) x 120mm(W) x 30mm(H) / 7.28in(L) x 4.72in(W) x 1.18in(H)
Package include: 1 Piece Graphic Card Fans with 1*Power D-type Interface cable
Size:92x92x25mm
Rated Voltage: 12V
Rated Current: 0.2A
Connecter: 3Pin
Power: 2.7W
Speed: 3000RPM
Air flow:62.3CFM
Noise:37dBA
Bearing type: Sleeve Bearing
Cable Length: 30cm Or 12 inches
Life: 35000 hours
Weight: 242g/pcs or 8.5 oz
Raijintek Morpheus II Universal GPU Air Cooler
MORPHEUS II Universal GPU Air Cooler, a superior high-end VGA cooler, designed to meet cooling capacity up to 360 Watts of TDP. Morpheus comes with 12 copper heat-pipes, 129 fins, copper base, and the option to install 2×120mm fans; those outstanding combination and design provide best acceleration of heat dissipation process to assure your VGA board running under optimal temperature. Additionally, Morpheus II comes with 26 RAM heat-sinks & 1 big VRM heat-sink.
Features:
- Cooling capacity up to 360 watts TDP
- 12 pcs copper heat-pipes and 129 pcs fins for efficient heat dissipation
- 24pcs heat-sink for RAM & 1 big heat-sink for VRM
- High compatibility with modern & future VGA cards
- Thermal adhesive to lower RAM and VRM temperature significantly and assure proper bond
- Supports two 120mm fans (8 fan clips in the box)
- Whole heat-sink nickel plated
Specifications:
- Dimension [W×D×H] 254×98×44 mm
- Weight 515 g [Heat Sink Only]
- Thermal Resistance: 0.135 °C/W [With Raijintek 120x25mm fan×2] or 0.143 °C/W [With Raijintek 120x13mm fan×2]
- Heat Sink: Base Material Mirror copper base. Fin Material Aluminum Alloy; Solder assembly
- Heat-pipe: SPEC Φ6mm. Q’ty 12 pcs
- Heat-sink for RAM & VRM
A type: 9pcs 13.4(W) × 11(H) × 15(D) mm
B type: 9pcs 13.4(W) × 5(H) × 15(D) mm
C type: 5pcs 5.9(W) × 11(H) × 20(D) mm
E type: 3pcs 5.9(W) × 11(H) × 6(D) mm
VRM type 28(W) × 18.5(H) × 94(D) mm
Application:
- AMD® R9 390x, R9 Fury, Hawaii chip (R9 290/290x), Curacao chip (HD 7850, 7870 xt; R9 270/270x)
- NVIDIA® GTX Series 1080Ti, 1080, 970, 980, 980Ti, 780Ti, 780, 770, 760, 650, 650Ti, 660, 660Ti, 680
Model: 0R100006
Conclusion
By our suggestions above, we hope that you can found gtx 980 ti liquid cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
