![Best Spa Heating Element 40 Kw](https://pinocollection.com/wp-content/uploads/thumbs_dir/e22432dbf44748b4beaa1a7d3da9726f-1w4g10ifj0ql0fgsppx8rh1in6z51djzecfbkd3l49uk.webp)
Best Spa Heating Element 40 Kw
Nowadays, there are so many products of spa heating element 4.0 kw in the market and you are wondering to choose a best one. You have searched for spa heating element 4.0 kw in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings spa heating element 4.0 kw which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
4.0KW, Incoloy 800 Spaguts Universal Flo-Thru Heater Element
- If your spa fails to heat the water properly, the heater element should always be checked
- This replacement heater element fits any spa controllers or spa packs that takes a universal hi-flo element
- For 110V application the 4.0 kW heater element outputs 1.0 kW (4.0 kW = 13648 BTU)
SpaGuts Universal Flo-Thru Heater Element, 4.0KW 220V, Incoloy 800 (Non-Coated). Made in USA! This is the standard type heater element primarily used in most spa controllers in the after-market and OEM controller or packs. Comes with 1-year limited warranty.
Balboa M7 Hot Tub Spa Heater Assembly OEM w/Sensors 4.0kW @ 240V / 1.0kW @ 120V
Genuine Balboa M7 Stainless Steel Flow-Through Replacement Hot Tub Heater Assembly using dual sensor M-7 technology. Has 2″ (nominal) fittings which measure 2-1/4″ actual inside diameter. For 1.5″ plumbing, use PVC reducer bushings. For Balboa VS, EL, TS, GS, and BP Series control systems. Latest updated version. Older units (obsolete) had white unions. OEM # 58117. also replacement for C2400-0807, 58032, 58103, 58104, 58148, 26-0807-5S-KS, 26-0807-5S-K, C2400-0807-TPS. Made in USA. 1-year manufacturer’s limited warranty.
SpaGuts 25-150-1205 Universal Flo-Thru Heater Element, 4.0kw, Titanium
Balboa 25-175-1010 VS M7 OEM Heater Assembly, 5.5KW, 220V, 58083
Gecko Spa Hot Tub Complete Heater 4.0kw with Gaskets SSPA Builders
You are buying a Replacement 4.0KW Heater Complete Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tube, Element, Split nuts and Gaskets it does not have the pressure switch. I also offer the element only for this heater tube in our store. Watch the video for more detailed information. NOTE: This listing is for the heater tube and element only any other parts are for illustration only. We have plenty of these. Note: We have a How To video on You Tube for this heater look for (Gecko S-Class SSPA Heater Tube & Element Spa Hot Tub Repair How To Video)
Spa Components Caldera Spas / Brett System Flo Thru Heater 4.0kw B24040S
Coleman Spas/ Brett Aqualine Stainless steel replacement heater assembly. 2″ x 15″, 4.0kW/230v element. Shipped with heater tailpieces, gaskets and nuts. Pressure switch tap at 90 degress from the heater terminals. There are no mounting studs on this assembly. Pressure switch not included.
Balboa 25-175-8104 OEM Heater Assembly, 4.0KW, 220V, M7 Sensors, 15"
Hot Spring Tiger River spas, Item 73790, PDR Titanium Heater, 1.5kW/6kW (OEM Factory Upgrade Replacement)
- Item 73790. This heater replaces all heaters in all 1995-now Hot Spring, Tiger River and Limelight hot tubs which includes the No Fault 6000 heaters, Watkins No Fault 5500 and the No-Fault 1500 cartridge style heater.
- This 2015 No-Fault PDR (power down reset) Titanium Heater is the newest factory upgrade replacement heater from the makers of Hot Springs spas.
- Factory approved and warrantied for all 115 volt 1.5kW and 230 volt – 6kW installations for all 1995-now Hot Spring and Tiger River spa models.
- For 4kW, 230 volt applications see the 73791 PDR.
- Note#1: This PDR (power-down-reset) heater eliminates the manual reset button, which means that you never need to remove the equipment door to reset the heater. Simply power down the spa for 30 seconds by either tripping off the GFCI breakers in the sub panel (on 230volt models) or unplugging the spa (115volt models).
No-Fault PDR Titanium Heater comes with thermistor o-rings. This model has a double-pass design, which helps with the heating of the water. A replacement for all Hot Spring Spas, 1995-current, that are 1.5 / 6kW.
Hydro Quip 25-250-1411 Heater Element, 4.0KW, 25-41411L, 12-0502-K
Hot Spring 73790 Tiger River Sumatran No Fault Heater 1997-2002
No-Fault PDR Titanium Heater comes with thermistor o-rings. This model has a double-pass design, which helps with the heating of the water. A replacement for all Hot Spring Spas, 1995-current, that are 1.5 / 6kW.
Conclusion
By our suggestions above, we hope that you can found spa heating element 4.0 kw for you.Please don’t forget to share your experience by comment in this post. Thank you!