Which Is The Best Pc Wate Cooling Pmp

Thermaltake Pacific DIY LCS PR22-D5 300ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4″ Thread Tt LCS Certified POM PMMA CL-W082-PL00BL-A

Thermaltake launches the Pacific PR Series tube reservoir and D5 pump for the ultimate in custom PC water cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22-D5 is manufactured from high quality POM and PMMA material to provide a crystal clear, high performance, durable solution. By giving users ideal mounting, fitting and flow, the PR22-D5 is the right choice for PC enthusiasts. Make your system a showcase for all to see with the Thermaltake Pacific PR Series.

Key Features:

• Featuring 6mm thick of the pipe wall, which can sustain the maximum pressure up to 99 PSI (Pounds per square inch).
• Heat-Resistant Acrylic Tank: Made of reliable, light weighted POM and PMMA construction, which is crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131°F
• G ¼” Thread Ports

Specification:

• 1mm (L) x 78mm (W) x 309.7mm (H)
• Material: POM + PMMA
• Capacity: 300ml
• Maximum Head: 15 Feet
• Maximum Flow Rate: 1135 L/Hr
• Maximum Pressure: 50 PSI
• Connector: 4 Pin
• Pump Speed: 1800, 2550, 3300, 4050, 4800 RPM
• G ¼”

Support 
Please visit our website or search “Thermaltake Support” for any assistance.

The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

Specification:
Material: Acrylic + ABS
Model: PU-FS4-J
Rated current: 0.7A
Rated function: 8W
Pump head: 4 meters
Pump flow: 800L/H
Starting voltage: 7V
The highest voltage: 13.5V
No-load speed: 5000RPM
Load speed: 3000RPM
Size: Approx. 5.5 * 6.4 * 6.4 cm/ 2.2 * 2.5 * 2.5 in
Weight: about 285 g

Package list:
1 * Water Pump
1 * Rubber Mat

EK-XRES 140 Revo D5 RGB PWM is a High-Performance water cooling pump with integrated reservoir. The core of the unit is the market-proven Xylem D5 PWM water pump. EK-XRES 140 Revo D5 RGB PWM series features a fully rounded see-through acrylic design thus offering stunning looks and greater usability. This allows installation at any angle within 360° of rotation. Special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities. EK-XRES 140 Revo D5 RGB PWM reservoir comes preinstalled with anti-cyclone insert. Optional PU anti-vortex foam and EK-HD Tube is enclosed for additional options. Compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. This water pump/reservoir combo unit can be mounted directly on computer chassis by using enclosed Revo D5 Holder. The 60mm diameter tube is made of a high-quality acrylic material, while the reservoir bottom/pump top is CNC machined acrylic glass.

Model: 3830046992987

Note:

No running without water when using.

Specification:

Pump parameters:

Thread: G1 / 4

Model: XHC8

Voltage: 12V

Power: 19W

Water flow: 800L/H

Water lift: approx. 5M / 16.4 ft

Power interface: large 4pin

Tank parameters:

Size: approx. 240 * 50 * 50 mm / 9.4 * 2 * 2 inch

Outside diameter: approx. 50mm / 2 inch

Inside diameter: approx. 40mm / 1.6 inch

Thread: G1 / 4
Product size: approx. 32 * 5 * 5 cm / 12.6 * 2 * 2 inch

Package List:

Water pump water tank *1

Plastic support *2

L support *2

Screw bag *1

Cotton pad *1

LENX SC600 DC 12V PC Cpu Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water pump for Destop Computer Laptop computer

Specifications:
Power consumption:10W
Rated voltage: DC 12V
Rated current: 0.8A
Max flow rate: 500L/H (132.09G/H)
Max static head: 3m (9.8ft)
Diameter of inlet:Female G 1/4″
Diameter of outlet:Female G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:3000 RPM
Size:length 9 cm, height 8 cm, width 6cm.

NOTE:

1. Working at rated voltage (DC12V/0.8A). The positive pole is red wire, the negative pole is black wire,white wire is test wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump

Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) is a value-oriented water cooling pump-reservoir combo. It has been designed to be an entry class combo solution that is able to offer great hydraulic performance complemented with RGB LEDs for modern aesthetics. The combo unit comes with a 120mm fan mount holder included.

The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and maximum flow of 250L/h and a very compact form

The EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) series pump-reservoir combo comes with a pre-installed anti-cyclone insert.

The main body features two G1/4“ threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). The reservoir tube is made of a quality acrylic material.

Model: 3831109813744

Conclusion

By our suggestions above, we hope that you can found pc wate cooling pmp for you.Please don’t forget to share your experience by comment in this post. Thank you!