Which Is The Best 3M Full Facepiece 6700

Product Description

3M Full Facepiece Reusable Respirator 6700/54145, Respiratory Protection, Small (Pack of 1)
CARE INSTRUCTIONS

1. Remove cartridges and filters.
2. Clean facepiece (excluding filters and cartridges) by immersing in warm cleaning solution, water temperature not to exceed 120º F (49º C), and scrub with soft brush until clean. Add neutral detergent if necessary. Do not use cleaners containing lanolin or other oils.
3. Disinfect facepiece by soaking in a solution of quaternary ammonia disinfectant or sodium hypochlorite (1 oz [30 ML] household bleach in 2 gallons [7.5 L] of water), or other disinfectant.
4. Rinse in fresh, warm water and air dry in noncontaminated atmosphere.
5. Respirator components must be inspected prior to each use. A respirator with any damaged or deteriorated components must be repaired or discarded.
6. The cleaned respirator should be stored away from contaminated areas when not in use.

WARNING
Do not clean with solvents. Cleaning with solvents may degrade some respirator components and reduce respirator effectiveness. Inspect all respirator components before each use to ensure good operating condition. Failure to do so may result in sickness or death.

From the Manufacturer

3M&#8482 Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants while still allowing for a wide field of view and wearer comfort. The large lens provides a panoramic field of view, allowing the worker to see better. An improved field of view can help increase both safety and productivity. All sizes of this lightweight facepiece weigh 2 pounds or less, which enhances comfort and promotes better worker compliance in wearing respiratory protection. This versatile respiratory protection facepiece works with numerous 3M particulate filters, gas/vapor cartridges and supplied air respirator systems, allowing for specialized use with multiple applications (filters, cartridges and supplied air systems sold separately).

 

Wide field of view – cartridge shown sold separately view larger

Curved lens offers peripheral viewing view larger

Rear view showing comfortable silicone faceseal view larger

Cool and comfortable breathing
This reusable respirator comes with a 3M Cool Flow&#8482 valve. This proprietary valve is designed to release hot, humid exhaled breath quickly, helping to prevent unpleasant build-up of heat inside the facepiece. Respirators with Cool Flow valves are ideal for long periods of wear, especially where conditions are hot, humid, or physically demanding.

 

A versatile respirator for many applications and industries
Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.

 

Meets industry recognized government standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce inhalation of certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.

 

Protects the health of workers
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable to wear.

 

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M Full Facepiece Reusable Respirator 6000 Series
	Multi Gas Vapor Cartridge/Filter P100	Organic Vapor/Acid Gas Cartridge/Filter P100	Acid Gas Cartridge/Filter P100	Acid Gas Cartridge	Ammonia Methylamine Organic Vapor Cartridge/Filter P100	Formaldehyde Organic Vapor Cartridge/Filter P100	Mercury Vapor Chlorine Gas Cartridge/Filter P100	Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

Engineered for comfort, durability and visibility, the 3M Ultimate FX Full Facepiece Reusable Respirator FF-400 Series is the only respirator with 3M Scotchgard Protector. This respirator features soft yet durable, silicone material and a large lens for excellent peripheral vision. It helps provide protection against certain airborne contaminants while keeping your vision clear with the 3M Scotchgard protected lens which makes it possible to more easily wipe paints, stains and other liquids off the large lens. Versatile—use with 3M particulate filters, gas/vapor cartridges and PAPR and supplied air systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make extended wear of the facepiece more comfortable and practical to use while helping to provide protection against certain airborne contaminants. A number of additional comfort and convenience features have been built into the facepiece, including a head cradle to help reduce pressure points and hair pulling, a soft silicone nose cup and faceseal to cushion heavy contact areas, bonded silicone gaskets to prevent loose gaskets from getting lost, and attachments that easily twist on and off. The facepiece fits securely with six straps that snugly wrap around the head, reducing shifting that can distract on the job and require readjustment. The straps are extremely durable, having been tested with over one million pulls. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.   NIOSH, a Federal government regulatory agency, has tested and approved the 3M Ultimate FX Full Facepiece Reusable Respirator FF-400 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The FF-400 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. WARNING: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

3M Construction Full Face Respirator Gray L 1 pc.

Engineered for comfort, durability and visibility, the 3M Ultimate FX Full Facepiece Reusable Respirator FF-400 Series is the only respirator with 3M Scotchgard Protector. This respirator features soft yet durable, silicone material and a large lens for excellent peripheral vision. It helps provide protection against certain airborne contaminants while keeping your vision clear with the 3M Scotchgard protected lens which makes it possible to more easily wipe paints, stains and other liquids off the large lens. Versatile—use with 3M particulate filters, gas/vapor cartridges and PAPR and supplied air systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make extended wear of the facepiece more comfortable and practical to use while helping to provide protection against certain airborne contaminants. A number of additional comfort and convenience features have been built into the facepiece, including a head cradle to help reduce pressure points and hair pulling, a soft silicone nose cup and faceseal to cushion heavy contact areas, bonded silicone gaskets to prevent loose gaskets from getting lost, and attachments that easily twist on and off. The facepiece fits securely with six straps that snugly wrap around the head, reducing shifting that can distract on the job and require readjustment. The straps are extremely durable, having been tested with over one million pulls. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.   NIOSH, a Federal government regulatory agency, has tested and approved the 3M Ultimate FX Full Facepiece Reusable Respirator FF-400 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The FF-400 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. WARNING: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

From the Manufacturer

Full facepiece respirators may be used up to 50 OSHA PEL or applicable government standard, whatever us lower. If exposure levels are not known, a fresh air system is recommended. 3M recommended for spray painting laquer, enamel and pesticides. Reuseable design – changeable filters and cartridges affords eye and respiratory protection Includes: 1 reuseable facepiece, 2 organic vapor cartridges, 4 P95 filters, 2 filter retainers and 2 face sheild covers. Spray Paint Respirator – Organic Vapor is a medium, and fits 70% of the people, or people with a hat size smaller then 8 1/4, with a average face.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m full facepiece 6700, eg:

• What are Top 10 3m full facepiece 6700 for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m full facepiece 6700 to buy?
• What are Top Rated 3m full facepiece 6700 to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m full facepiece 6700?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m full facepiece 6700.
• Before deciding to buy any 3m full facepiece 6700, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m full facepiece 6700 and What you should consider when buying the 3m full facepiece 6700 and Where to Buy or Purchase the 3m full facepiece 6700. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m full facepiece 6700 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m full facepiece 6700.

Conclusion

By our suggestions above, we hope that you can found 3m full facepiece 6700 for you.Please don’t forget to share your experience by comment in this post. Thank you!