The 10 Best 3M 7000 Filters

NIOSH approved for environments containing certain oil and non-oil based particles.

3M cartridge/filter 60923, organic vapor/acid gas/P100 when properly fitted on 3M half & full face pieces 6000 series and 3M half & full face pieces 7000 series with bayonet style cartridge holders, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide or hydrogen fluoride & particulates at concentrations up to 10 times the permissible exposure limit (PEL) with half face pieces or 50 times PEL with full face pieces.

This organic vapor cartridge/P100 filter can be used for a variety of applications, including petrochemical and chemical processing, utilities, pharmaceuticals, mining and primary metals. Swept-back design offers enhanced comfort and visibility. When properly fitted, helps provide respiratory protection from certain organic vapors as well as non-oil and oil particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face pieces or 50 times PEL with full face pieces.

NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against of organic vapours and ozone protection up to 10 times OSHA PEL. Not NIOSH certified for use against ozone. Use with 3M Respirators 5000 Series or 3M Cartridge 6000 Series with 3M Adapter 502, 3M Facepieces 6000 Series or 3M Facepieces 7000 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode.Refer to specific provincial regulation for appropriate assigned protection factors for full face respirators. Also offers nuisance level relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases or in environments that are immediately dangerous to life or health (IDLH).

3M P100 Filter featuring exceptional 99. 97% filter efficiency renders lightweight, easy breathing comfort and versatile protection against many oil/non-oil based particulate contaminants. Filter measuring 4. 3” X 4. 3” is used in a variety applications cleaning, demolition, facility maintenance, automotive, construction, food and beverage Manufacturing, manufacturing and more. Filter is compatible with 6000 series Face pieces or 7000 series Face pieces with bayonet filter holders. Respirator Type: 5000 Series 6000 Series 6500 Series 7000 Series FF-400 Series, Safety Product Type: Filter, Standard: NIOSH

Product Description

Fits all 3M 6000 series and 7500 series half and full facepiece respirators. Professional use only for lead and mold. NIOSH approved: P100.

From the Manufacturer

Fits all 3M 6000 series and 7500 series half and full facepiece respirators. Professional use only for lead and mold. NIOSH approved: P100.

Product Description

NIOSH approved against certain organic vapors, acid gases and particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF 400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

3M P100 Filter featuring exceptional 99.97% filter efficiency renders lightweight, easy breathing comfort and versatile protection against many oil/non-oil based particulate contaminants. Filter measuring 4.3″ X 4.3″ is used in a variety of applications namely welding, brazing, torch cutting, metal pouring, soldering and exposure to lead, asbestos, cadmium, arsenic and MDA for concentrations up to 10 times the permissible exposure limit with half Facepieces or 50 times PEL with full Facepieces. This filter is designed to suit 5000, 6000 and 7000 series air purifying respirator.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m 7000 filters, eg:

• What are Top 10 3m 7000 filters for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m 7000 filters to buy?
• What are Top Rated 3m 7000 filters to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m 7000 filters?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m 7000 filters.
• Before deciding to buy any 3m 7000 filters, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m 7000 filters and What you should consider when buying the 3m 7000 filters and Where to Buy or Purchase the 3m 7000 filters. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m 7000 filters of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m 7000 filters.

Conclusion

By our suggestions above, we hope that you can found 3m 7000 filters for you.Please don’t forget to share your experience by comment in this post. Thank you!