Best 3D Printer Water Cooling Kit

LENX SC600 DC 12V PC Cpu Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water pump for Destop Computer Laptop computer

Specifications:
Power consumption:10W
Rated voltage: DC 12V
Rated current: 0.8A
Max flow rate: 500L/H (132.09G/H)
Max static head: 3m (9.8ft)
Diameter of inlet:Female G 1/4″
Diameter of outlet:Female G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:3000 RPM
Size:length 9 cm, height 8 cm, width 6cm.

NOTE:

1. Working at rated voltage (DC12V/0.8A). The positive pole is red wire, the negative pole is black wire,white wire is test wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump

Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1

The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.

Model: 3831109863473

Aluminum Water Cooling Block:

Specifications:
– Product Size: 40 x 40 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption

Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.

Package Content:
2 X CPU Water Cooling Block

Conclusion

By our suggestions above, we hope that you can found 3d printer water cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!