Which Is The Best 16Mm Water Cooling

The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.

P/N: CL-W214-CU00BL-B

Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black

Dimension: D26 x 21 (H) (mm)

Applicable: OD : 16 mm

Weight : 320 g

Material: CU + AL

Screw Thread: G 1/4

Note: PETG Tube to G1/4

Using metric size fittings? The Bykski PETG tubing is crystal clear and easy to work with. Sold as a 4 pack , each stick is 750mm long giving you plenty to outfit your entire system!
Secondary pictures shows 3 metric sizes for reference.

Specifications

Compatibility

Parts Included

Warnings
With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid PETG Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.

Model: TR-3831109841402-8P

Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:
Tube Compatibility: 12mm x 16mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)

Now making custom bends with rigid tubing could not be easier. With the Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tools have mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.

Model: TR-3831109841402-4P

Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Compression Fitting 16mm This connector has a 1/4″ outer thread. The other side fits HardTubes with an outer diameter of 16mm. Technical Details Material: brass Colour: deep black Dimensions Diameter: 21mm Height: 18mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) – knurled – deep black sixpack

Conclusion

By our suggestions above, we hope that you can found 16mm water cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!