Which Is The Best 12 V Cooling Pump

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

LENX SC600 DC 12V PC Cpu Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water pump for Destop Computer Laptop computer

Specifications:
Power consumption:10W
Rated voltage: DC 12V
Rated current: 0.8A
Max flow rate: 500L/H (132.09G/H)
Max static head: 3m (9.8ft)
Diameter of inlet:Female G 1/4″
Diameter of outlet:Female G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:3000 RPM
Size:length 9 cm, height 8 cm, width 6cm.

NOTE:

1. Working at rated voltage (DC12V/0.8A). The positive pole is red wire, the negative pole is black wire,white wire is test wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump

Important Tips:

Please add a filter to avod hair or dirts being clogged with in this pumps.
if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!

Specifications:

Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140°F
Item dimension: 51mm*34mm*42.7mm

Note:

1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;

Features:
G1/4 thread water pump for computer CPU water cooling system. Noiseless water cooling pump – Ultra-quiet operation won’t disturb you. Made of high-quality acrylic and plastic, ensure a long service life. Stable performance with high flow rate( 500L/H) Easy to install and use.
Specification:
Type: Water Pump
Voltage: 12V DC, large 4P / small 3P plug
Current: 0.8A
Power: 10W
Lift: 4 meters
Flow rate: 500L/H
Material: Acrylic + Plastic
Thread: G1/4
Inlet and outlet: 1/4 internal thread, Thread Coupling is NOT included
Weight: Approx. 290g
Size: Approx. 5 * 5 * 7.8cm /  2 * 2 * 3.1in
Package size: Approx. 13.5 * 8.5 * 9.5cm / 5.3 * 3.3 * 3.7in

Package list:
1 * Water Pump

Note:
Please allow slight error due to manual measurement. Thanks for your kind understanding.

Note:

No running without water when using.

Specification:

Pump parameters:

Thread: G1 / 4

Model: XHC8

Voltage: 12V

Power: 19W

Water flow: 800L/H

Water lift: approx. 5M / 16.4 ft

Power interface: large 4pin

Tank parameters:

Size: approx. 240 * 50 * 50 mm / 9.4 * 2 * 2 inch

Outside diameter: approx. 50mm / 2 inch

Inside diameter: approx. 40mm / 1.6 inch

Thread: G1 / 4
Product size: approx. 32 * 5 * 5 cm / 12.6 * 2 * 2 inch

Package List:

Water pump water tank *1

Plastic support *2

L support *2

Screw bag *1

Cotton pad *1

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 117 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 110 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

Features:
1. In order to facilitate transportation, the pump and the water tank are disassembled and placed, and the user needs to install it simply.

Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in 
                                     or 24.5cm / 9.6in 
                                     or 29.5cm / 11.6in 
                                     or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g

Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut

Specification:
Flow Rate: max 500L / H
Head: max 3 Meter
Power Connector: 3pin connector
Voltage: DC12V
Power: 10W
Noise: 16 DB
Working life: 50000 hours
Water tank capacity: 250 ml
Threaded connections: G 1/4″ DN8
Product Dimensions: Diameter 60mm × height 160mm

Package:
1 × Water Cooling DC Pump Tank 250ML F CPU CO2 Heat Exchanger Water Cooler 500 L/H

The Enhanced D5 Liquid Cooling 12V Pump Motor is packed with a new PWM control chip. With this new controller the D5 now has a duty-cycle, feedback, and PWM control that scales in a similar way as the DDC 3.25. This makes it a very reliable and smooth operating pump. This PWM control allows you to automate the pump speed based on CPU temperature using the motherboard PWM CPU fan header. This functionality keeps your pump only running at speeds that are needed. This also allows the safety feature of auto shut down based on RPM feedback if available in your BIOS.
Warnings/Cautions:
Use of caustic and/or abrasive coolant will void your warranty and may cause your pump to fail. Running D5 pumps dry (without fluid) immediately voids the warranty. Replacements / RMAs will not be given under these conditions.
PrimoChill is not responsible for any hardware damage. Use at your own risk. This pump comes stock without any housing allowing you to integrate any of your favorite pump tops and pump accessories. Due to this the pump cannot be used as a standalone unit.
Nominal voltage:12 V DC
Operating voltage range:8 to 24 VDC
Nominal power (@ 12 V):37 W
Max Nominal current (@ 12 V):2 amps
Motor type:Brushless, microprocessor controlled Maximum head:12.79 ft (3.9 m)
Maximum discharge:~ 396 GPH (1500 LPH)
Maximum system temperature: 140°F (60°C)
Performance will vary based on housing used

Conclusion

By our suggestions above, we hope that you can found 12 v cooling pump for you.Please don’t forget to share your experience by comment in this post. Thank you!