Best 10Kw Heating Element

Pre-tested, pre-wired heat kits 1 phase models. Featuring: electric heat limit control, rust resistant nickel chromium heating elements. For rooftop or ground-level horizontal installation and applications. Approved for manufactured or modular homes. KW: 10, circuit breaker included. Min. Order: 1 EA – Manufacturer: Goodman – Country of Manufacture: United States – Manufacturer Part Number: HKR-10C.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

WGO Series Heat Strips: GOODMAN/JANITROL AIR HANDLERS AR-18-1 thru AR-61-1; AER-24 thru AER-61; ASPF 18 THRU 60 AEPF/ADPF 18 THRU 60 VARIABLE & MULTI SPEED BLOWERS MBE/MBR 18,000 – 60,000 BTU’s AVPTC 1830, 3137, 4260 PACKAGED AIR CONDITIONER GPH/C13 024-060 AMANA AIR HANDLERS ARUF 018-061; ARPF 024-061; ARPT 024-060; AEPT 024-060 MBVC 1-1/2 TO 5 TON MODULAR BLOWERS . Standard Features: – Elements protected by metal wrapper – Point Suspension element support system which eliminates hot spots to extend heater life – Time delay between steps which recycles on power interruption or brown-out – No off delay (a problem with sequencers) to increase SEER rating and prevents heating overshoot – Chatter and Rapid-cycle Resistant Contactors rated for 250,000 cycles – Rounded metal corners for safe handling. – Modular control plug for installation ease – ETL certified

Nordyne / Intertherm / Miller Electric Furnace, 10 KW Element. part # 902821. Element is OEM. These elements will fit several different Nordyne/Intertherm/Miller Electric Furnace including model #’s E3EB-010H, E3EB-015H, E3EB-020H, E2EB-010HA, E2EB-015HA, E2EB-020HA, E2EH-010HA, E2EH-015HA, E2EH-020HA, E1EB-010HA, E1EB-015HA, E1EB-020HA, E1EH-010HA, E1EH-015HA, E1EH-020HA, FEHA-015HA, FEHA-020HA, FEHB-015HA, FEHB-020HA, FEBB-015HA, FEBB-020HA, FEHY-015HA, FEHY-020HA, CME-010HA-03, CME-015HA-03, CME-020HA-03. This part replaces part #’s 239825, 2398250, 239831, 2398310, 491221, 4912210, 498191, 4981910, 631692, 6316920

Mr Steam heating element 29101CMS 10KW 240V 1PH MS SUPER 1 For Residential Steam Units

RSPC 21-2137-00 M405256 HEATING ELEMENT 10KW 240V-AC D613303

Electric heating element for Intertherm

Conclusion

By our suggestions above, we hope that you can found 10kw heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!